Multi-Lobed Handwheels EN 577.8

Photo

EN 577.8 Plastic Multi-Lobed Handwheels, Stainless Steel Bushing, for Position Indicators EN 000.8 / EN 000.3

ELESA original design
code: VHT.85-GXX1/VHT.110-GXX2

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Product description

Information

These handwheels have a recess in the hub to accept EN 000.8 or EN 000.3 position indicators.

Resistant to solvents, oil, greases and other chemical agents.

If application requires occasional removal of position indicator, handwheel may be ordered upon request with an EN 576 cover cap to shroud the empty recess.

Specification

Handwheel body
Plastic, Polyamide (PA)
- Glass fiber reinforced
- Temperature resistant up to 212 °F (100 °C)
- Black, matte finish

Bushing
Stainless steel AISI 303

Set screw DIN 916
With internal hex and serrated point

RoHS

Accessory

Position Indicators EN 000.8
Position Indicators EN 000.3

On request

Other modifications such as larger bores, keyways, set screw holes, etc.

Build & Price

Part Number	d₁	d₂ H7 Bore	d₃	d₄	d₅	b	l₁	l₂	l₃	l₄	For position indicators EN 000.8 Size	EN 000.3 Size

577.8-85-B10-NI	3.35	B 10 H7	0.71	0.94	2.28	0.69	0.69	2.01	0.24	0.71	1.65	-
577.8-110-B12-NI	4.33	B 12 H7	0.87	1.10	3.03	0.79	0.87	2.28	0.24	0.71	2.36	2.36

d₁	d₂ H7 Bore	d₃	d₄	d₅	b	l₁	l₂	l₃	l₄	For position indicators EN 000.8 Size	EN 000.3 Size

3.35	B 10	0.71	0.94	2.28	0.69	0.69	2.01	0.24	0.71	1.65	-
4.33	B 12	0.87	1.10	3.03	0.79	0.87	2.28	0.24	0.71	2.36	2.36

3D Product Configurator

Outside diameter d₁

3.35

4.33

Bore d₂

B 10

B 12

Material

NI - Stainless steel

Installation Instructions

Install the handwheel to the spindle and fasten it with the set screw.

2.Turn the spindle to the starting point (0 position).

Move the position indicator to the 0 position by turning the outer gear wheel.
Install the position indicator into the recess of the hub and fasten it with a set screw. To avoid deformation of the housing, do not apply unnecessary excessive torque!
Check by turning the handwheel to ensure that the starting position of the spindle coincides with the 0 position of the two pointers (EN 000.8) or respectively pointer and counter (EN 000.3). If necessary, take out and readjust the position indicator.

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$1,031.80

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	6	Mex$1,413.57
7	99	Mex$1,362.16
100	249	Mex$1,285.06
≥ 250		Mex$1,156.55

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.242 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.