EN 570.2 Crank Handles Plastic, with Revolving Handle, with Blind Bore

EN 570.2 Plastic Crank Handles, with Revolving Handle, with Blind Bore

Original design
code: MT-AT

Standard Sheet EN 570.2 Print This Page Cross Holes GN 110 ISO Fundamental Tolerances Plastic Characteristics

Product description

Crank handles EN 570.2 are connected to a shaft by means of a cross pin.

Owing to the small, non-protruding steel bushing, these cranked handles are lower priced than EN 570.

Resistant to solvents, oils, grease and other chemical agents.

Specification

Crank body
Plastic, polyamide (PA)

Glass fiber reinforced
Operating temperature
+32 °F to +194 °F (0 °C to +90 °C)
Black, matte finish

Hub bushing
Steel, blackened finish, molded-in

Revolving handle
Plastic, polyamide (PA)

Black, matte finish
Spindle
Steel, zinc plated, blue passivated finish

RoHS

On request

Other modifications such as special inch and metric bores, keyways, set screw holes, etc.

EN 570.2 Plastic Crank Handles, with Revolving Handle, with Blind Bore sketch

Hide technical drawing

Part Options / Table

Part Number	Length l	d₁ H9 Bore	d₂	d₃	d₄	h₁	h₂	h₃	h₄ ≈	t min.	Ø Handle

570.2-50-B5/16	1.97	B 5/16 H9	0.59	0.71	0.89	1.16	0.73	0.49	1.38	0.63	0.55
570.2-64-B3/8	2.52	B 3/8 H9	0.59	0.79	1.04	1.24	0.69	0.53	1.77	0.71	0.63
570.2-80-B3/8	3.15	B 3/8 H9	0.71	0.94	1.18	1.46	0.93	0.53	2.36	0.91	0.71
570.2-100-B1/2	3.94	B 1/2 H9	0.71	0.94	1.32	1.59	0.98	0.55	2.56	0.87	0.87
570.2-130-B5/8	5.12	B 5/8 H9	1.02	1.34	1.54	1.93	1.34	0.59	2.56	1.10	0.87
570.2-160-B3/4	6.30	B 3/4 H9	1.02	1.36	1.73	2.15	1.42	0.71	3.15	1.10	0.94
570.2-50-B6	1.97	B 6 H9	0.59	0.71	0.89	1.16	0.73	0.49	1.38	0.63	0.55
570.2-64-B8	2.52	B 8 H9	0.59	0.79	1.04	1.24	0.69	0.53	1.77	0.71	0.63
570.2-80-B10	3.15	B 10 H9	0.71	0.94	1.18	1.46	0.93	0.53	2.36	0.91	0.71
570.2-100-B12	3.94	B 12 H9	0.71	0.94	1.32	1.59	0.98	0.55	2.56	0.87	0.87
570.2-130-B14	5.12	B 14 H9	1.02	1.34	1.54	1.93	1.34	0.59	2.56	1.10	0.87
570.2-160-B16	6.30	B 16 H9	1.02	1.36	1.73	2.15	1.42	0.71	3.15	1.10	0.94

Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)

Length l	d₁ H9 Bore	d₂	d₃	d₄	h₁	h₂	h₃	h₄ ≈	t min.	Ø Handle

1.97	B 5/16	0.59	0.71	0.89	1.16	0.73	0.49	1.38	0.63	0.55
2.52	B 3/8	0.59	0.79	1.04	1.24	0.69	0.53	1.77	0.71	0.63
3.15	B 3/8	0.71	0.94	1.18	1.46	0.93	0.53	2.36	0.91	0.71
3.94	B 1/2	0.71	0.94	1.32	1.59	0.98	0.55	2.56	0.87	0.87
5.12	B 5/8	1.02	1.34	1.54	1.93	1.34	0.59	2.56	1.10	0.87
6.30	B 3/4	1.02	1.36	1.73	2.15	1.42	0.71	3.15	1.10	0.94

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

Length l	d₁ H9 Bore	d₂	d₃	d₄	h₁	h₂	h₃	h₄ ≈	t min.	Ø Handle

1.97	B 6	0.59	0.71	0.89	1.16	0.73	0.49	1.38	0.63	0.55
2.52	B 8	0.59	0.79	1.04	1.24	0.69	0.53	1.77	0.71	0.63
3.15	B 10	0.71	0.94	1.18	1.46	0.93	0.53	2.36	0.91	0.71
3.94	B 12	0.71	0.94	1.32	1.59	0.98	0.55	2.56	0.87	0.87
5.12	B 14	1.02	1.34	1.54	1.93	1.34	0.59	2.56	1.10	0.87
6.30	B 16	1.02	1.36	1.73	2.15	1.42	0.71	3.15	1.10	0.94

Build & Price

GN 110 Cross Holes (Special Order) - Metric

Show / Hide columns

d₁ / s	d₁ / s	d₂ H11	d₃ Thread	Length l Standard version	Length l Handwheels DIN 950 / GN 949 up to Ø 250 mm

6	7	2.5	M 3	4.5	-
8	9	3	M 5	5.5	4.5
10	11	3	M 5	5.5	4.5
12	13	4	M 6	6.5	5.5
14	15	4	M 6	6.5	5.5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d₂ pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

GN 110 Cross Holes (Special Order) - Inch

Show / Hide columns

d₁ / s	d₂ H11	d₃ Thread	Length l

1/4	3/32	6x32	0.188
5/16	1/8	10x32	0.2
3/8	1/8	10x32	0.2
1/2	5/32	1/4x20	0.25
9/16	5/32	1/4x20	0.25
5/8	3/16	1/4x20	0.312
11/16	3/16	1/4x20	0.312
3/4	3/16	1/4x20	0.312
13/16	1/4	1/4x20	0.375
1	1/4	5/16x18	0.375
1 1/16	1/4	5/16x18	0.375
1 1/18	1/4	5/16x18	0.375
1 1/14	1/4	5/16x18	0.375