Cart

The cart is empty.

Country
Show all

GN 471.3 Crank Handles Aluminum, with Locking Retractable Handle, with Steel Retractable Mechanism

GN 471.3 Aluminum Crank Handles with Locking Retractable Handle, with Steel Retractable Mechanism Bore code: B - Bore
Bore code: B - Bore
Standard Sheet GN 471.3 Print This Page Cross Holes GN 110 Square Bores WN 79 ISO Fundamental Tolerances

Product description

Crank handles GN 471.3 are mainly used for applications where the hand piece must not protrude.

In the operating position, the hand piece is firmly locked.

By pulling the hand piece in the axial direction out of its locating cone, it can be folded back into place.

The spring holds the hand piece firmly in both positions.

Specification

Crank body
Aluminum

  • Powder coated
    Black, textured finish
  • Contact face of hub machined

Retractable handle GN 598.3
Plastic, phenolic resin (PF)

  • Black, shiny finish
  • Retractable mechanism
    Steel, blackened finish

RoHS

On request

  • Other modifications such as special inch and metric bores, squares, keyways, set screw holes, etc.
  • Withretractable handles EN 598.5 (Stainless steel retractable mechanism)
GN 471.3 Aluminum Crank Handles with Locking Retractable Handle, with Steel Retractable Mechanism sketch
Hide technical drawing
GN 471.3 Aluminum Crank Handles with Locking Retractable Handle, with Steel Retractable Mechanism sketch

Part Options / Table
Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)
Length ld1 H7
Bore		s  H11
Square		d2d3h1h2h3h4h5 ≈Ø
Handle GN 598
3.94B 1/2-V 1/21.061.181.100.670.510.772.660.91
4.92B 5/8-V 5/81.261.381.340.870.550.772.660.91
6.30B 1/2B 3/4V 3/41.381.541.501.020.630.773.251.02
Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)
Length ld1 H7
Bore		s  H11
Square		d2d3h1h2h3h4h5 ≈Ø
Handle GN 598
3.94B 12V 121.061.181.100.670.510.772.660.91
4.92B 14V 141.261.381.340.870.550.772.660.91
6.30B 17V 171.381.541.501.020.630.773.251.02

Build & Price
Cranked handle length l
Square s
Bore d1

Inch

Metric

Cranked handle length l
Square s
Bore d1

Inch

Metric

GN 110 Cross Holes (Special Order) - Metric
f8ca6d28-dd73-48fa-98c4-bb48305c7686
Show / Hide columns
d1 / sd1 / sd2 H11d3
Thread		Length l
Standard version		Length l
Handwheels DIN 950 / GN 949 up
to Ø 250 mm
672.5M 34.5-
893M 55.54.5
10113M 55.54.5
12134M 66.55.5
14154M 66.55.5
16175M 687
18195M 687
20215M 687
22236M 6109
24256M 6109
26276M 6109

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

GN 110 Cross Holes (Special Order) - Inch
f8ca6d28-dd73-48fa-98c4-bb48305c7686
Show / Hide columns
d1 / sd2 H11d3
Thread		Length l
1/43/326x320.188
5/161/810x320.2
3/81/810x320.2
1/25/321/4x200.25
9/165/321/4x200.25
5/83/161/4x200.312
11/163/161/4x200.312
3/43/161/4x200.312
13/161/41/4x200.375
11/45/16x180.375
1 1/161/45/16x180.375
1 1/181/45/16x180.375
1 1/141/45/16x180.375

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Total Mexican Pesos (net)
Mex$1,341.60
Available within 2 weeks
Please note our quantity discounts (Mexican Pesos).
MinMaxPrice
149Mex$1,341.60
5099Mex$1,229.80
100249Mex$1,118.00
≥ 250Mex$1,006.20
Prop 65: Not compliant
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
RoHS: Compliant
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.352 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021
All Prices are in Mexican Pesos. Taxes Not Included.

CAD Download

Other Data Formats

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

Please enter the code above.

CAD Download Tutorial About CAD Downloads
Save as Favorites
Recommend a product

Please enter the code above.

Need Help?

Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time: +52(81)2721-4021

Special Requests | Contact our sales team

GN 471.3-100-B1/2GN 471.3-100-V1/2GN 471.3-125-B5/8GN 471.3-125-V5/8GN 471.3-160-V3/4GN 471.3-160-B1/2GN 471.3-160-B3/4GN 471.3-100-B12GN 471.3-100-V12GN 471.3-125-B14GN 471.3-125-V14GN 471.3-160-B17GN 471.3-160-V17

This could also be interesting...

Plastic Crank Handles, with Locking Retractable Handle, with Steel Retractable Mechanism
EN 570.3 Crank Handles, Plastic, with Locking Retractable Handle, with Steel Retractable Mechanism
Aluminum Crank Handles, with Recessed Locking Retractable Handle, with Steel Retractable Mechanism
GN 472.3 Crank Handles, Aluminum, with Recessed Locking Retractable Handle, with Steel Retractable Mechanism
Aluminum Crank Handles, with Revolving Handle, with Through Round or Square Bore
GN 471 Crank Handles, Aluminum, with Revolving Handle, with Through Round or Square Bore
Your Contact

You are looking for a Winco partner near you? Please select the country.

JW Winco Services

Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time

+52(81)2721-4021 ventas@jwwinco.mx
Request Callback
 
Our customers in the US are served by our local branch office.
 
J.W. Winco, Inc.
J.W. Winco, Inc.
Go to
www.jwwinco.com
An error has occurred!
We have received your callback request and will contact you soon.