Ledge Handles GN 430.1

Product description

Information

A typical field of application for ledge handles GN 430.1 are doors of protective enclosures on machines and devices. They are also suitable as drawer handles.

The screw channel for M6 screws allows any number of mounting screws at any position within the dimension l₂.

The aluminum profile is available in any length, and the end caps are also available individually. Special lengths can be delivered even in relatively small quantities.

For ledge handles GN 430.1 with lettering black, only one end cap is mounted when delivered, so that the supplied paper / film strip can be labeled and pushed into the groove provided.

A ZIP file with various templates (Word^®, Open Office, PDF) is provided at https://www.jwwinco.com/en-us/service/downloads/templates-for-gn-4301-1, which can be used to create labels. The paper strip also serves as a carrier for common lettering tapes up to 18 mm in width.

Specification

Handle profile
Aluminum

Powder coated
Black, RAL 9005, textured finishSW
Anodized finish, natural colorEL

End caps
Plastic, Polyamide (PA)
Black-gray

Lettering block
Insert groove supplied with:

Paper strip 200 g/m², 19.5 mm width
bright white, age-resistant
PVC hard film
Transparent

RoHS

On request

Special lengths
Single paper strips / film strips
Various inch and metric size fasteners

Build & Price

Part Number SW	Part Number EL	l₁	b₁	b₂	b₃	h₁	h₂	l₂ Screw area	l₃	t


430.1-110-SW	430.1-110-EL	4.33	1.42	0.51	0.31	1.34	0.94	2.60	0.87	0.47
430.1-130-SW	430.1-130-EL	5.12	1.42	0.51	0.31	1.34	0.94	3.39	0.87	0.47
430.1-150-SW	430.1-150-EL	5.91	1.42	0.51	0.31	1.34	0.94	4.17	0.87	0.47
430.1-200-SW	430.1-200-EL	7.87	1.42	0.51	0.31	1.34	0.94	6.14	0.87	0.47
430.1-250-SW	430.1-250-EL	9.84	1.42	0.51	0.31	1.34	0.94	8.11	0.87	0.47
430.1-300-SW	430.1-300-EL	11.81	1.42	0.51	0.31	1.34	0.94	10.08	0.87	0.47
430.1-400-SW	430.1-400-EL	15.75	1.42	0.51	0.31	1.34	0.94	14.02	0.87	0.47
430.1-500-SW	430.1-500-EL	19.69	1.42	0.51	0.31	1.34	0.94	17.95	0.87	0.47

l₁	b₁	b₂	b₃	h₁	h₂	l₂ Screw area	l₃	t

4.33	1.42	0.51	0.31	1.34	0.94	2.60	0.87	0.47
5.12	1.42	0.51	0.31	1.34	0.94	3.39	0.87	0.47
5.91	1.42	0.51	0.31	1.34	0.94	4.17	0.87	0.47
7.87	1.42	0.51	0.31	1.34	0.94	6.14	0.87	0.47
9.84	1.42	0.51	0.31	1.34	0.94	8.11	0.87	0.47
11.81	1.42	0.51	0.31	1.34	0.94	10.08	0.87	0.47
15.75	1.42	0.51	0.31	1.34	0.94	14.02	0.87	0.47
19.69	1.42	0.51	0.31	1.34	0.94	17.95	0.87	0.47

3D Product Configurator

Information on Mounting with a Screw Channel

Thanks to the screw channel running all the way through, any number of screws with standard thread M6 can be placed in any location within the screw area l₂. Please note the following guide values:

• Minimum screw-in depth: 0.39" (10 mm)
• Max. load per screw: 90 lbf (400 N)
• Max. tightening torque: 4 Nm

Application Examples

Information on GN 430.1 Ledge Handles with Lettering Block

A ZIP file with various templates (Word®, Open Office, PDF) is provided at www.jwwinco.com/service, which can be used to create labels. The paper strip also serves as a carrier for common lettering tapes up to 18 mm in width.

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$314.40

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	99	Mex$430.73
100	249	Mex$394.83
250	499	Mex$358.94
≥ 500		Mex$323.05

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.183 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.

CAD Download

Other Data Formats

About CAD Downloads

Save as Favorites

GN 430.1 Ledge Handles Aluminum Handle Profile, Plastic End Caps, with Lettering Block

Photo

Product description

Information

Specification

On request

Technical drawing

Part Options / Table

Metric

Build & Price

Information on Mounting with a Screw Channel

Application Examples

Information on GN 430.1 Ledge Handles with Lettering Block

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...