Crank Handles GN 472.5

Product description

Information

The shape of crank handle GN 472.5 with retractable handle is modern, attractive, and meets all demands of industrial designers.

It is a further improvement on the standard crank handles with retractable handle and is mainly used where the application requires the crank to be used in a more confined area of the equipment. The hand piece folds into the recess of the crank arm.

Pulling the handle up from the recess in the crank, the spring locks the hand piece stem into the cone receptacle and is firmly locked in the operating position.

By pulling the hand piece in axial direction out of its locating cone, it can be folded back down into the recessed crank arm.

The spring holds the hand piece firmly in both positions.

Specification

Crank body
Aluminum

Powder coated
Silver, RAL 9006, textured finishSR
Black, RAL 9005, textured finishSW
Contact face of hub machined

Cover
Plastic, light gray

Stepped retractable handle GN 798.5
Plastic
Technopolymer

Black, matte finish
Retractable mechanism
Stainless steel
Stem and component parts
AISI 303
Sintered hub base
AISI 316 LHC

Stepped Retractable Handles GN 798.5

RoHS

On request

Other modifications such as inch and metric bores, squares, keyways, set screw holes, etc.

Build & Price

Part Number SR	Part Number SW	Length l	d₁ +0.001 Bore	s +0.002 Square	d₂	d₃	h₁	h₂ ≈	h₃	h₄	h₅ ≈	Ø Handle GN 798.5


472.5-80-B1/2-SR	472.5-80-B1/2-SW	3.15	B 1/2 +0.001	-	0.91	1.18	0.77	0.16	1.00	0.17	1.69	0.63
472.5-80-V1/2-SR	472.5-80-V1/2-SW	3.15	-	V 1/2 +0.002	0.91	1.18	0.77	0.16	1.00	0.17	1.69	0.63
472.5-100-B1/2-SR	472.5-100-B1/2-SW	3.94	B 1/2 +0.001	-	1.05	1.38	0.93	0.22	1.16	0.17	2.26	0.71
472.5-100-V1/2-SR	472.5-100-V1/2-SW	3.94	-	V 1/2 +0.002	1.05	1.38	0.93	0.22	1.16	0.17	2.26	0.71
472.5-125-B5/8-SR	472.5-125-B5/8-SW	4.92	B 5/8 +0.001	-	1.10	1.46	1.20	0.41	1.44	0.17	3.01	0.94
472.5-125-V5/8-SR	472.5-125-V5/8-SW	4.92	-	V 5/8 +0.002	1.10	1.46	1.20	0.41	1.44	0.17	3.01	0.94
472.5-80-B10-SR	472.5-80-B10-SW	3.15	B 10 +0.001	-	0.91	1.18	0.77	0.16	1.00	0.17	1.69	0.63
472.5-80-V10-SR	472.5-80-V10-SW	3.15	-	V 10 +0.002	0.91	1.18	0.77	0.16	1.00	0.17	1.69	0.63
472.5-100-B12-SR	472.5-100-B12-SW	3.94	B 12 +0.001	-	1.05	1.38	0.93	0.22	1.16	0.17	2.26	0.71
472.5-100-V12-SR	472.5-100-V12-SW	3.94	-	V 12 +0.002	1.05	1.38	0.93	0.22	1.16	0.17	2.26	0.71
472.5-125-B14-SR	472.5-125-B14-SW	4.92	B 14 +0.001	-	1.10	1.46	1.20	0.41	1.44	0.17	3.01	0.94
472.5-125-V14-SR	472.5-125-V14-SW	4.92	-	V 14 +0.002	1.10	1.46	1.20	0.41	1.44	0.17	3.01	0.94

Length l	d₁ +0.001 Bore	s +0.002 Square	d₂	d₃	h₁	h₂ ≈	h₃	h₄	h₅ ≈	Ø Handle GN 798.5

3.15	B 1/2	V 1/2	0.91	1.18	0.77	0.16	1.00	0.17	1.69	0.63
3.94	B 1/2	V 1/2	1.05	1.38	0.93	0.22	1.16	0.17	2.26	0.71
4.92	B 5/8	V 5/8	1.10	1.46	1.20	0.41	1.44	0.17	3.01	0.94

Length l	d₁ +0.001 Bore	s +0.002 Square	d₂	d₃	h₁	h₂ ≈	h₃	h₄	h₅ ≈	Ø Handle GN 798.5

3.15	B 10	V 10	0.91	1.18	0.77	0.16	1.00	0.17	1.69	0.63
3.94	B 12	V 12	1.05	1.38	0.93	0.22	1.16	0.17	2.26	0.71
4.92	B 14	V 14	1.10	1.46	1.20	0.41	1.44	0.17	3.01	0.94

3D Product Configurator

GN 110 Cross Holes (Special Order) - Metric

Show / Hide columns

d₁ / s	d₁ / s	d₂ H11	d₃ Thread	Length l Standard version	Length l Handwheels DIN 950 / GN 949 up to Ø 250 mm

6	7	2.5	M 3	4.5	-
8	9	3	M 5	5.5	4.5
10	11	3	M 5	5.5	4.5
12	13	4	M 6	6.5	5.5
14	15	4	M 6	6.5	5.5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d₂ pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

GN 110 Cross Holes (Special Order) - Inch

Show / Hide columns

d₁ / s	d₂ +0.003/-0.001	d₃ Thread	Length l

1/4	3/32	6x32	0.188
5/16	1/8	10x32	0.2
3/8	1/8	10x32	0.2
1/2	5/32	1/4x20	0.25
9/16	5/32	1/4x20	0.25
5/8	3/16	1/4x20	0.312
11/16	3/16	1/4x20	0.312
3/4	3/16	1/4x20	0.312
13/16	1/4	1/4x20	0.375
1	1/4	5/16x18	0.375
1 1/16	1/4	5/16x18	0.375
1 1/18	1/4	5/16x18	0.375
1 1/14	1/4	5/16x18	0.375

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$1,802.40

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	49	Mex$1,802.40
50	99	Mex$1,652.20
100	249	Mex$1,502.00
≥ 250		Mex$1,351.80

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.463 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.