Crank Handles EN 570.2

Product description

Information

Crank handles EN 570.2 are connected to a shaft by means of a cross pin.

Owing to the small, non-protruding steel bushing, these cranked handles are lower priced than EN 570.

Resistant to solvents, oils, grease and other chemical agents.

Specification

Crank body
Plastic, Polyamide (PA)

Special glass fiber reinforced
Temperature resistant up to 195 °F (90 °C)
Black, matte finish

Hub bushing
Steel, blackened finish, molded-in

Revolving handles

Plastic
Black, matte finish
Threaded spindle
Steel, zinc plated, blue passivated finish

RoHS

On request

Other modifications such as special inch and metric bores, keyways, set screw holes, etc.

Build & Price

Part Number	Length l	d₁ H9 Bore	d₂	d₃	d₄	h₁	h₂	h₃	h₄ ≈	t min.	Ø Handle

570.2-50-B5/16	1.97	B 5/16 H9	0.59	0.71	0.89	1.16	0.73	0.49	1.38	0.63	0.55
570.2-64-B3/8	2.52	B 3/8 H9	0.59	0.79	1.04	1.24	0.69	0.53	1.77	0.71	0.63
570.2-80-B3/8	3.15	B 3/8 H9	0.71	0.94	1.18	1.46	0.93	0.53	2.36	0.91	0.71
570.2-100-B1/2	3.94	B 1/2 H9	0.71	0.94	1.32	1.59	0.98	0.55	2.56	0.87	0.87
570.2-130-B5/8	5.12	B 5/8 H9	1.02	1.34	1.54	1.93	1.34	0.59	2.56	1.10	0.87
570.2-160-B3/4	6.30	B 3/4 H9	1.02	1.36	1.73	2.15	1.42	0.71	3.15	1.10	0.94
570.2-50-B6	1.97	B 6 H9	0.59	0.71	0.89	1.16	0.73	0.49	1.38	0.63	0.55
570.2-64-B8	2.52	B 8 H9	0.59	0.79	1.04	1.24	0.69	0.53	1.77	0.71	0.63
570.2-80-B10	3.15	B 10 H9	0.71	0.94	1.18	1.46	0.93	0.53	2.36	0.91	0.71
570.2-100-B12	3.94	B 12 H9	0.71	0.94	1.32	1.59	0.98	0.55	2.56	0.87	0.87
570.2-130-B14	5.12	B 14 H9	1.02	1.34	1.54	1.93	1.34	0.59	2.56	1.10	0.87
570.2-160-B16	6.30	B 16 H9	1.02	1.36	1.73	2.15	1.42	0.71	3.15	1.10	0.94

Length l	d₁ H9 Bore	d₂	d₃	d₄	h₁	h₂	h₃	h₄ ≈	t min.	Ø Handle

1.97	B 5/16	0.59	0.71	0.89	1.16	0.73	0.49	1.38	0.63	0.55
2.52	B 3/8	0.59	0.79	1.04	1.24	0.69	0.53	1.77	0.71	0.63
3.15	B 3/8	0.71	0.94	1.18	1.46	0.93	0.53	2.36	0.91	0.71
3.94	B 1/2	0.71	0.94	1.32	1.59	0.98	0.55	2.56	0.87	0.87
5.12	B 5/8	1.02	1.34	1.54	1.93	1.34	0.59	2.56	1.10	0.87
6.30	B 3/4	1.02	1.36	1.73	2.15	1.42	0.71	3.15	1.10	0.94

Length l	d₁ H9 Bore	d₂	d₃	d₄	h₁	h₂	h₃	h₄ ≈	t min.	Ø Handle

1.97	B 6	0.59	0.71	0.89	1.16	0.73	0.49	1.38	0.63	0.55
2.52	B 8	0.59	0.79	1.04	1.24	0.69	0.53	1.77	0.71	0.63
3.15	B 10	0.71	0.94	1.18	1.46	0.93	0.53	2.36	0.91	0.71
3.94	B 12	0.71	0.94	1.32	1.59	0.98	0.55	2.56	0.87	0.87
5.12	B 14	1.02	1.34	1.54	1.93	1.34	0.59	2.56	1.10	0.87
6.30	B 16	1.02	1.36	1.73	2.15	1.42	0.71	3.15	1.10	0.94

3D Product Configurator

GN 110 Cross Holes (Special Order) - Inch

Show / Hide columns

d₁ / s	d₂ +0.003/-0.001	d₃ Thread	Length l

1/4	3/32	6x32	0.188
5/16	1/8	10x32	0.2
3/8	1/8	10x32	0.2
1/2	5/32	1/4x20	0.25
9/16	5/32	1/4x20	0.25
5/8	3/16	1/4x20	0.312
11/16	3/16	1/4x20	0.312
3/4	3/16	1/4x20	0.312
13/16	1/4	1/4x20	0.375
1	1/4	5/16x18	0.375
1 1/16	1/4	5/16x18	0.375
1 1/18	1/4	5/16x18	0.375
1 1/14	1/4	5/16x18	0.375

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d₂ pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993