ELESA original design
Knurled control knobs EN 526 have a colored cover that conceals protruding or recessed shafts and is suitable for imprinting characters or symbols, if desired.
For assembly, the cover can be pressed on by hand. Disassembly is done by applying light pressure on the edge of the cover.
The combination with scale rings EN 526.1 extends the application possibilities of the control knobs. The scale rings are fastened using the 3 bores on the pitch circle d8.
Body
Plastic, polyamide, Polyamide (PA)
Insert
Steel, blackened finish
Set screw
Steel, blackened finish
Cover cap
Plastic, Polyacetal (POM)
Black, RAL 9005, matte finishDSW
Orange, RAL 2004, matte finishDOR
Gray, RAL 7035, matte finishDGR
Yellow, RAL 1021, matte finishDGB
Blue, RAL 5024, matte finishDBL
Red, RAL 3000, matte finishDRT
Green, RAL 6017, matte finishDGN
RoHS
| d1 Nominal dimension | Actual dimension | d2 H7 Bore | d3 | d4 | d5 | d6 | d7 | d8 P.C.D. Ø | l1 | l2 | l3 | l4 | l5 | r | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.26 | 1.26 | B 6 | - | - | 0.59 | 0.77 | 0.85 | M 4 | - | 0.75 | 1.04 | 0.20 | 0.63 | 0.26 | 0.35 | - |
| 1.65 | 1.65 | B 8 | - | - | 0.71 | 1.16 | 1.22 | M 5 | - | 1.10 | 1.26 | 0.28 | 0.69 | 0.45 | 0.41 | - |
| 1.89 | 1.89 | B 8 | - | - | 0.87 | 1.30 | 1.36 | M 5 | 0.12 | 1.24 | 1.40 | 0.31 | 0.87 | 0.33 | 0.55 | 0.55 |
| 2.05 | 2.05 | B 10 | B 12 | - | 0.87 | 1.48 | 1.54 | M 5 | 0.16 | 1.43 | 1.52 | 0.33 | 0.87 | 0.47 | 0.53 | 0.61 |
| 2.48 | 2.50 | B 10 | B 12 | B 14 | 1.02 | 1.89 | 1.99 | M 6 | 0.24 | 1.79 | 1.75 | 0.43 | 1.18 | 0.41 | 0.63 | 0.75 |
| Min | Max | Price |
|---|---|---|
| 1 | 9 | Mex$339.83 |
| 10 | 249 | Mex$327.47 |
| 250 | 499 | Mex$308.94 |
| ≥ 500 | Mex$278.04 |
Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time: +52(81)2721-4021
