Diamond Cut Knurled Knobs EN 534

Product description

Information

The outside rim of diamond cut knurled knobs EN 534 has been designed with a truncated diamond knurl that provides a comfortable grip, and exercises maximum torque under the worst working conditions without causing operator fatigue.

The design of the fine diamond knurling simplifies grip adjustment of the knob during rapid rotation, thus providing the best control without requiring extreme angular adjustments of the hand and wrist.

Resistant to solvents, oils, grease and other chemical agents.

Specification

Knob body
Plastic
Technopolymer (Polypropylene PP)

Reinforced, shock-resistant
Temperature resistant up to 194 °F (90 °C)
Black, RAL 9005, matte finishSW

Insert
Brass

Color of the cover cap
Black, RAL 9005, matte finish

Knobs with **inch*plain blind bore come complete with socket set screw for securing knob to shaft

RoHS

Build & Price

Part Number	d₁ Nominal dimension	Actual dimension	d₂ Thread	d₃ +0.002 Bore	d₄	h₁	h₂	t₁ min.	t₂ min.

534-1.26-1/4X20-SW	1.26	1.22	1/4 x 20	-	0.59	0.94	0.45	0.47	-
534-1.57-1/4X20-SW	1.57	1.57	1/4 x 20	-	0.67	1.04	0.49	0.47	-
534-1.57-B1/4-SW	1.57	1.57	-	B 1/4 +0.002	0.67	1.04	0.49	0.51	0.55
534-1.57-5/16X18-SW	1.57	1.57	5/16 x 18	-	0.67	1.04	0.49	0.51	0.55
534-1.97-5/16X18-SW	1.97	1.97	5/16 x 18	-	0.79	1.30	0.63	0.71	-
534-1.97-B3/8-SW	1.97	1.97	-	B 3/8 +0.002	0.79	1.30	0.63	0.67	0.79
534-1.97-3/8X16-SW	1.97	1.97	3/8 x 16	-	0.79	1.30	0.63	0.67	0.79
534-2.36-3/8X16-SW	2.36	2.36	3/8 x 16	-	0.91	1.54	0.73	0.79	-
534-2.36-1/2X13-SW	2.36	2.36	1/2 x 13	-	0.91	1.54	0.73	0.79	-
534-2.36-B3/8-SW	2.36	2.36	-	B 3/8 +0.002	0.91	1.54	0.73	-	0.98
534-32-M5-SW	1.26	1.22	M 5	-	0.59	0.94	0.45	0.39	-
534-32-M6-SW	1.26	1.22	M 6	-	0.59	0.94	0.45	0.47	-
534-40-B6-SW	1.57	1.56	-	B 6 +0.002	0.67	1.04	0.49	0.47	0.55
534-40-M6-SW	1.57	1.56	M 6	-	0.67	1.04	0.49	0.47	0.55
534-40-M8-SW	1.57	1.56	M 8	-	0.67	1.04	0.49	0.51	-
534-50-B8-SW	1.97	1.97	-	B 8 +0.002	0.79	1.30	0.63	0.79	0.79
534-50-M8-SW	1.97	1.97	M 8	-	0.79	1.30	0.63	0.79	0.79
534-50-M10-SW	1.97	1.97	M 10	-	0.79	1.30	0.63	0.71	-
534-60-B10-SW	2.36	2.40	-	B 10 +0.002	0.91	1.54	0.73	0.79	0.98
534-60-M10-SW	2.36	2.40	M 10	-	0.91	1.54	0.73	0.79	0.98
534-60-M12-SW	2.36	2.40	M 12	-	0.91	1.54	0.73	0.79	-
534-70-M12-SW	2.76	2.76	M 12	-	0.94	1.65	0.81	0.79	-
534-70-M14-SW	2.76	2.76	M 14	-	0.94	1.65	0.81	0.79	-

d₁ Nominal dimension	Actual dimension	d₂ Thread	d₃ +0.002 Bore	d₄	h₁	h₂	t₁ min.	t₂ min.

1.26	1.22	1/4 x 20	-	0.59	0.94	0.45	0.47	-
1.57	1.57	1/4 x 20	-	0.67	1.04	0.49	0.47	-
1.57	1.57	5/16 x 18	B 1/4	0.67	1.04	0.49	0.51	0.55
1.97	1.97	5/16 x 18	-	0.79	1.30	0.63	0.71	-
1.97	1.97	3/8 x 16	B 3/8	0.79	1.30	0.63	0.67	0.79
2.36	2.36	3/8 x 16	-	0.91	1.54	0.73	0.79	-
2.36	2.36	1/2 x 13	-	0.91	1.54	0.73	0.79	-
2.36	2.36	-	B 3/8	0.91	1.54	0.73	-	0.98

d₁ Nominal dimension	Actual dimension	d₂ Thread	d₃ +0.002 Bore	d₄	h₁	h₂	t₁ min.	t₂ min.

1.26	1.22	M 5	-	0.59	0.94	0.45	0.39	-
1.26	1.22	M 6	-	0.59	0.94	0.45	0.47	-
1.57	1.56	M 6	B 6	0.67	1.04	0.49	0.47	0.55
1.57	1.56	M 8	-	0.67	1.04	0.49	0.51	-
1.97	1.97	M 8	B 8	0.79	1.30	0.63	0.79	0.79
1.97	1.97	M 10	-	0.79	1.30	0.63	0.71	-
2.36	2.40	M 10	B 10	0.91	1.54	0.73	0.79	0.98
2.36	2.40	M 12	-	0.91	1.54	0.73	0.79	-
2.76	2.76	M 12	-	0.94	1.65	0.81	0.79	-
2.76	2.76	M 14	-	0.94	1.65	0.81	0.79	-

3D Product Configurator

GN 110 Cross Holes (Special Order) - Metric

Show / Hide columns

d₁ / s	d₁ / s	d₂ H11	d₃ Thread	Length l Standard version	Length l Handwheels DIN 950 / GN 949 up to Ø 250 mm

6	7	2.5	M 3	4.5	-
8	9	3	M 5	5.5	4.5
10	11	3	M 5	5.5	4.5
12	13	4	M 6	6.5	5.5
14	15	4	M 6	6.5	5.5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d₂ pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

GN 110 Cross Holes (Special Order) - Inch

Show / Hide columns

d₁ / s	d₂ +0.003/-0.001	d₃ Thread	Length l

1/4	3/32	6x32	0.188
5/16	1/8	10x32	0.2
3/8	1/8	10x32	0.2
1/2	5/32	1/4x20	0.25
9/16	5/32	1/4x20	0.25
5/8	3/16	1/4x20	0.312
11/16	3/16	1/4x20	0.312
3/4	3/16	1/4x20	0.312
13/16	1/4	1/4x20	0.375
1	1/4	5/16x18	0.375
1 1/16	1/4	5/16x18	0.375
1 1/18	1/4	5/16x18	0.375
1 1/14	1/4	5/16x18	0.375

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$88.00

In Stock: 80

In Stock

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	9	Mex$120.56
10	249	Mex$116.18
250	499	Mex$109.60
≥ 500		Mex$98.64

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.040 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.