Clamping cam units GN 918.2 have a circumferential wedge surface. They allow for rapid and secure clamping and releasing with a relatively large clamping range and with high clamping force. Owing to the small pitch angle (wedge angle), the clamping bolt is self-locking.
Fastening via screw from the operator‘s side bridges a greater clamping range. A sufficiently large screw-in depth t is necessary to safely absorb the screw forces.
The ball levers of types KVS / GVS form a positive connection with the eccentric cam by means of a serration. During assembly, the lever can thus be fixed in a position favorable for clamping or, in the relaxed position, rotated out of the clamping range.
Specification
Steel
Clamping bolt, guide bushing
and thrust washer
Case-hardened
Socket cap screw DIN 912-12.9
Lever body
Blackened finish
Ball knob DIN 319
Plastic, Phenolic (PF)
Black, shiny finish
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.414 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight. Phone: +52(81)2721-4021
All Prices are in Mexican Pesos. Taxes Not Included.