Pneumatic Fastening Clamps GN 864

Product description

Information

The maximum clamping moment of pneumatic fastening clamps GN 864 is reached once the clamping arm is at the end of its stroke. For this reason the working stroke should be completed as closely as possible to the stroke end.

The type FG is equipped with a nonstick coating of polytetrafluorethylene (PTFE) for protection against welding spray and corrosion. With protective covers GN 864.1, the tensioning mechanism can be protected against penetrating dirt.

Specification

Clamp
Steel C45

Chemically nickel platedNC
Nonstick coating
Polytetrafluorethylene (PTFE), greenFG

Max. pressure 10 bar

RoHS

Accessory

Protective Covers GN 864.1

Build & Price

Part Number NC	Part Number FG	Size (Piston Ø)	Max. clamping moment in Nm at 6 bar	F_S Clamping force at r at 6 bar	F_H Holding capacity at r	a	b -0.008	d₁ -0.001	d₂	d₃ +0.001	d₄	d₅	h₁	h₂


864-20-BL-NC	864-20-BL-FG	20	60	499 lbf (2220 N)	1580 lbf (7030 N)	1.06	0.394 -0.008	1.102 -0.001	M 5	0.276 +0.001	0.17	M 5	0.63	2.01
864-32-BL-NC	864-32-BL-FG	32	150	924 lbf (4110 N)	2895 lbf (12876 N)	1.44	0.472 -0.008	1.575 -0.001	M 6	0.354 +0.001	0.20	G 1/8	0.83	2.97
864-40-BL-NC	864-40-BL-FG	40	300	1515 lbf (6740 N)	3809 lbf (16943 N)	1.75	0.630 -0.008	1.969 -0.001	M 8	0.433 +0.001	0.27	G 1/8	1.02	3.60
864-50-BL-NC	864-50-BL-FG	50	475	2023 lbf (9000 N)	5096 lbf (22666 N)	2.07	0.709 -0.008	2.362 -0.001	M 10	0.512 +0.001	0.33	G 1/8	1.22	4.49

Size (Piston-Ø)	l₁ -0.02	l₂	l₃	l₄	l₅	m₁ ±0.0004	m₂	m₃ ±0.0004	m₄	m₅ ±0.0004	m₆	r	s

5.91 -0.02	1.48	2.76	0.85	0.18	0.4724 ±0.0004	0.30	0.6693 ±0.0004	1.34	0.8661 ±0.0004	0.51	1.06	1.26	0.51
8.11 -0.02	2.05	3.58	1.22	0.24	0.7087 ±0.0004	0.39	0.9843 ±0.0004	2.01	1.1811 ±0.0004	0.87	1.44	1.65	0.59
9.61 -0.02	2.48	4.09	1.46	0.30	0.8661 ±0.0004	0.51	1.1811 ±0.0004	2.44	1.4567 ±0.0004	0.98	1.75	2.05	0.71
10.98 -0.02	2.91	4.35	1.69	0.31	1.0630 ±0.0004	0.47	1.8504 ±0.0004	2.81	1.7323 ±0.0004	1.38	2.07	2.44	0.83

Size (Piston Ø)	Max. clamping moment in Nm at 6 bar	F_S Clamping force at r at 6 bar	F_H Holding capacity at r	a	b -0.008	d₁ -0.001	d₂	d₃ +0.001	d₄	d₅	h₁	h₂

20	60	499 lbf (2220 N)	1580 lbf (7030 N)	1.06	0.394	1.102	M 5	0.276	0.17	M 5	0.63	2.01
32	150	924 lbf (4110 N)	2895 lbf (12876 N)	1.44	0.472	1.575	M 6	0.354	0.20	G 1/8	0.83	2.97
40	300	1515 lbf (6740 N)	3809 lbf (16943 N)	1.75	0.630	1.969	M 8	0.433	0.27	G 1/8	1.02	3.60
50	475	2023 lbf (9000 N)	5096 lbf (22666 N)	2.07	0.709	2.362	M 10	0.512	0.33	G 1/8	1.22	4.49

Size (Piston-Ø)	l₁ -0.02	l₂	l₃	l₄	l₅	m₁ ±0.0004	m₂	m₃ ±0.0004	m₄	m₅ ±0.0004	m₆	r	s	t

20	5.91	1.48	2.76	0.85	0.18	0.4724	0.30	0.6693	1.34	0.8661	0.51	1.06	1.26	0.51
32	8.11	2.05	3.58	1.22	0.24	0.7087	0.39	0.9843	2.01	1.1811	0.87	1.44	1.65	0.59
40	9.61	2.48	4.09	1.46	0.30	0.8661	0.51	1.1811	2.44	1.4567	0.98	1.75	2.05	0.71
50	10.98	2.91	4.35	1.69	0.31	1.0630	0.47	1.8504	2.81	1.7323	1.38	2.07	2.44	0.83

3D Product Configurator

Size

Type

BL - Horizontal clamping arm

Finish

FG - Polytetrafluorethylene (PTFE), green

NC - Chemically nickel plated

Dead Point Mechanism Operating Principle / Types

These pneumatic fastening clamps (Patent MISATI) are used for clamping, holding, gripping and positioning of workpieces in jigs and handling systems.

The salient points of these pneumatic fastening clamps are:
• High clamping force
• Small dimensions
• Reduced air consumption
• Light weight

The drawings shown here explain the functional principle of the dead point mechanism as well as the three available types.
Pistons with diameters of 20, 32, 40 and 50 mm yield a clamping force of 60 Nm up to 475 Nm, which leads to clamping forces being much above those of competitors’ clamps.

The pneumatic fastening clamps have been designed and configured to achieve an extended life. Functional tests have proved that even after 20 million cycles they were still serviceable.

Further salient design points are:

• The clamp is kinematically designed such that self-retention (holding force FH) is achieved in the clamped position (clamping force FS) after passing the dead point due to irreversibility.

• The forward stroke sequence of the clamping arm is rapid but the ultimate clamping action is slow and as a result pneumatic damping is normally not required. Upon request, however, it can be supplied when big masses are moved.

• The clamping mechanism is fitted with needle bearings which give optimum clamping forces and reduced wear.

• The steel cylinder with the integrated clamping mechanism are in one unit. This leads to high stability for these small units with an extended range of applications. The placement of the air connection at the bottom end leads also to many other advantages.

• The clamping mechanism of GN 864 is also shrouded to avoid the ingress of dirt and other objects which could interfere with the proper functioning of the clamps (such as welding operations).

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$14,017.80

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	4	Mex$19,204.39
5	9	Mex$17,604.02
10	24	Mex$16,003.66
≥ 25		Mex$14,403.29

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 1.411 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.