GN 717 Indexing Plungers Steel, Non Lock-Out, with Pull Ring / with Wire Loop

Photo

GN 717 Steel Indexing Plungers, Non Lock-Out, with Pull Ring / with Wire Loop Type: A - With pull ring, without lock nut
Type: A - With pull ring, without lock nut
GN 717 Steel Indexing Plungers, Non Lock-Out, with Pull Ring / with Wire Loop Type: A - With pull ring, without lock nut GN 717 Steel Indexing Plungers, Non Lock-Out, with Pull Ring / with Wire Loop Type: AK - With pull ring, with lock nut GN 717 Steel Indexing Plungers, Non Lock-Out, with Pull Ring / with Wire Loop Type: D - With wire loop, without lock nut GN 717 Steel Indexing Plungers, Non Lock-Out, with Pull Ring / with Wire Loop Type: DK - With wire loop, with lock nut

Product description

Information

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores.

During assembly, the maximum tightening torques shown in the table should not be exceeded when securing the lock nut.

Specification

Threaded body
SteelST, zinc plated, blue passivated finish


Plunger pin
Stainless steel
Euorpean Standard No. 1.4305 (AISI 303)


Spring
Stainless steel AISI 301


Pull ring / wire loop
Stainless steel AISI 301


Lock nut

  • Inch size
    ANSI/ASME B18.2.2
    Steel, zinc plated, blue passivated finish
  • Metric size
    DIN 439 B / ISO 4035 / ISO 8675
    Steel, zinc plated, blue passivated finish

RoHS

Technical drawing

3D
Hide technical drawing
GN 717 Steel Indexing Plungers, Non Lock-Out, with Pull Ring / with Wire Loop sketch

Part Options / Table

Type

AWith pull ring, without lock nut
AKWith pull ring, with lock nut
DWith wire loop, without lock nut
DKWith wire loop, with lock nut
Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)
d1
Pin -0.002
Bore +0.001/+0.003
d2
Thread
d3d4el1l2l3l4l5
min.
l6l7A/FMax.
tightening
torque
in Nm
Spring load ≈
Initial

End
0.203/8 x 160.710.280.451.770.200.630.240.531.670.610.39221.12 lbf (5 N)5.40 lbf (24 N)
0.241/2 x 130.940.370.542.250.240.790.300.652.140.820.47381.12 lbf (5 N)4.72 lbf (21 N)
0.315/8 x 111.180.460.772.800.310.940.350.812.631.020.67801.35 lbf (6 N)4.95 lbf (22 N)
0.395/8 x 111.180.460.772.940.391.020.350.892.791.020.67800.90 lbf (4 N)6.07 lbf (27 N)
Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)
d1
Pin -0.002
Bore +0.001/+0.003
d2
Thread
d3d4el1l2l3l4l5
min.
l6l7A/FMax.
tightening
torque
in Nm
Spring load ≈
Initial

End
0.12M 60.550.240.271.320.140.470.180.391.300.510.2420.67 lbf (3 N)2.70 lbf (12 N)
0.12M 6 x 0.750.550.240.271.320.140.470.180.391.300.510.2430.67 lbf (3 N)2.70 lbf (12 N)
0.16M 60.550.240.271.320.160.470.180.391.310.510.2420.67 lbf (3 N)2.70 lbf (12 N)
0.16M 8 x 10.550.240.361.590.180.630.240.531.650.610.3181.12 lbf (5 N)5.40 lbf (24 N)
0.20M 80.710.280.361.770.200.630.240.531.670.610.3171.12 lbf (5 N)5.40 lbf (24 N)
0.20M 8 x 10.710.280.361.770.200.630.240.531.670.610.3171.12 lbf (5 N)5.40 lbf (24 N)
0.20M 10 x 10.710.280.451.770.200.630.240.531.670.610.39221.12 lbf (5 N)5.40 lbf (24 N)
0.24M 100.940.370.452.250.240.790.300.672.140.820.39151.12 lbf (5 N)4.72 lbf (21 N)
0.24M 12 x 1.50.940.370.542.250.240.790.300.652.140.820.47381.12 lbf (5 N)4.72 lbf (21 N)
0.31M 121.180.460.542.800.310.940.350.812.631.020.47201.35 lbf (6 N)4.95 lbf (22 N)
0.31M 12 x 1.51.180.460.542.800.310.940.350.812.631.020.47201.35 lbf (6 N)4.95 lbf (22 N)
0.31M 16 x 1.51.180.460.772.800.310.940.350.812.631.020.67801.35 lbf (6 N)4.95 lbf (22 N)
0.39M 16 x 1.51.180.460.772.940.391.020.350.892.791.020.67800.90 lbf (4 N)6.07 lbf (27 N)

Build & Price

3D Product Configurator
Pin diameter d1
Thread d2

Inch


Metric


Type




Material

Selected Part

Total Mexican Pesos (net)
Mex$171.00
In Stock: 9
In Stock
Please note our quantity discounts (Mexican Pesos).
MinMaxPrice
199Mex$234.27
100249Mex$214.75
250499Mex$195.23
≥ 500Mex$175.70
Prop 65: Not compliant
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
RoHS: Compliant
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.028 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021
All Prices are in Mexican Pesos. Taxes Not Included.

CAD Download

Other Data Formats

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

Please enter the code above.

CAD Download Tutorial About CAD Downloads
Save as Favorites

Please enter the code above.

Need Help?

Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time: +52(81)2721-4021

Special Requests | Contact our sales team

This could also be interesting...

Your Contact

You are looking for a Winco partner near you? Please select the country.

JW Winco Services

Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time

Request Callback
 
Our customers in the US are served by our local branch office.
 
J.W. Winco, Inc.
An error has occurred!
We have received your callback request and will contact you soon.