Indexing Plungers GN 8017

Product description

Information

Indexing plungers with lock-out GN 8017 (type C / CK) are used for applications where the plunger pin needs to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notch keeps the plunger in the retracted position.

These zinc die-cast indexing plungers are economically priced.

Specification

Threaded body
Zinc die-cast, zinc plated, blue passivated finish

Plunger pin
Stainless steel AISI 303

Knob
Plastic
Technopolymer (Polyamide PA)

Temperature resistant up to 230 °F (110 °C)
Black, matte finish
Not removable

Lock nut
Steel, zinc plated, blue passivated finish
ANSI / ASME B18.2.2

RoHS

Build & Price

Part Number B - Non lock-out, without lock nut	d₁ Pin -0.001/-0.002 Bore +0.001	l₁	d₂ Thread	d₃	k	l₂	l₃	l₄	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

8017-0.156-0.234-5/16X18-B	0.156 -0.001/-0.002 / +0.001	0.234	5/16 x 18	0.630	0.551	1.382	0.630	0.201	0.38	2	0.90 lbf (4 N)	2.81 lbf (12.5 N)
8017-0.187-0.312-3/8X16-B	0.187 -0.001/-0.002 / +0.001	0.312	3/8 x 16	0.748	0.630	1.571	0.752	0.189	0.50	4	1.12 lbf (5 N)	4.05 lbf (18 N)
8017-0.250-0.375-1/2X13-B	0.250 -0.001/-0.002 / +0.001	0.375	1/2 x 13	0.906	0.791	1.890	0.870	0.228	0.56	13	1.35 lbf (6 N)	5.62 lbf (25 N)
8017-0.312-0.468-5/8X11-B	0.312 -0.001/-0.002 / +0.001	0.468	5/8 x 11	1.102	0.941	2.280	1.000	0.339	0.69	17	1.91 lbf (8.5 N)	8.54 lbf (38 N)
8017-0.375-0.468-5/8X11-B	0.375 -0.001/-0.002 / +0.001	0.468	5/8 x 11	1.102	0.941	2.280	1.000	0.339	0.69	17	2.14 lbf (9.5 N)	8.54 lbf (38 N)

Part Number BK - Non lock-out, with lock nut	d₁ Pin -0.001/-0.002 Bore +0.001	l₁	d₂ Thread	d₃	k	l₂	l₃	l₄	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

8017-0.156-0.234-5/16X18-BK	0.156 -0.001/-0.002 / +0.001	0.234	5/16 x 18	0.630	0.551	1.382	0.630	0.201	0.38	2	0.90 lbf (4 N)	2.81 lbf (12.5 N)
8017-0.187-0.312-3/8X16-BK	0.187 -0.001/-0.002 / +0.001	0.312	3/8 x 16	0.748	0.630	1.571	0.752	0.189	0.50	4	1.12 lbf (5 N)	4.05 lbf (18 N)
8017-0.250-0.375-1/2X13-BK	0.250 -0.001/-0.002 / +0.001	0.375	1/2 x 13	0.906	0.791	1.890	0.870	0.228	0.56	13	1.35 lbf (6 N)	5.62 lbf (25 N)
8017-0.312-0.468-5/8X11-BK	0.312 -0.001/-0.002 / +0.001	0.468	5/8 x 11	1.102	0.941	2.280	1.000	0.339	0.69	17	1.91 lbf (8.5 N)	8.54 lbf (38 N)
8017-0.375-0.468-5/8X11-BK	0.375 -0.001/-0.002 / +0.001	0.468	5/8 x 11	1.102	0.941	2.280	1.000	0.339	0.69	17	2.14 lbf (9.5 N)	8.54 lbf (38 N)

Part Number C - Lock-out, without lock nut	d₁ Pin -0.001/-0.002 Bore +0.001	l₁	d₂ Thread	d₃	k	l₂	l₃	l₄	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

8017-0.156-0.234-5/16X18-C	0.156 -0.001/-0.002 / +0.001	0.234	5/16 x 18	0.630	0.551	1.382	0.630	0.201	0.38	2	0.90 lbf (4 N)	2.81 lbf (12.5 N)
8017-0.187-0.312-3/8X16-C	0.187 -0.001/-0.002 / +0.001	0.312	3/8 x 16	0.748	0.630	1.571	0.752	0.189	0.50	4	1.12 lbf (5 N)	4.05 lbf (18 N)
8017-0.250-0.375-1/2X13-C	0.250 -0.001/-0.002 / +0.001	0.375	1/2 x 13	0.906	0.791	1.890	0.870	0.228	0.56	13	1.35 lbf (6 N)	5.62 lbf (25 N)
8017-0.312-0.468-5/8X11-C	0.312 -0.001/-0.002 / +0.001	0.468	5/8 x 11	1.102	0.941	2.280	1.000	0.339	0.69	17	1.91 lbf (8.5 N)	8.54 lbf (38 N)
8017-0.375-0.468-5/8X11-C	0.375 -0.001/-0.002 / +0.001	0.468	5/8 x 11	1.102	0.941	2.280	1.000	0.339	0.69	17	2.14 lbf (9.5 N)	8.54 lbf (38 N)

Part Number CK - Lock-out, with lock nut	d₁ Pin -0.001/-0.002 Bore +0.001	l₁	d₂ Thread	d₃	k	l₂	l₃	l₄	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

8017-0.156-0.234-5/16X18-CK	0.156 -0.001/-0.002 / +0.001	0.234	5/16 x 18	0.630	0.551	1.382	0.630	0.201	0.38	2	0.90 lbf (4 N)	2.81 lbf (12.5 N)
8017-0.187-0.312-3/8X16-CK	0.187 -0.001/-0.002 / +0.001	0.312	3/8 x 16	0.748	0.630	1.571	0.752	0.189	0.50	4	1.12 lbf (5 N)	4.05 lbf (18 N)
8017-0.250-0.375-1/2X13-CK	0.250 -0.001/-0.002 / +0.001	0.375	1/2 x 13	0.906	0.791	1.890	0.870	0.228	0.56	13	1.35 lbf (6 N)	5.62 lbf (25 N)
8017-0.312-0.468-5/8X11-CK	0.312 -0.001/-0.002 / +0.001	0.468	5/8 x 11	1.102	0.941	2.280	1.000	0.339	0.69	17	1.91 lbf (8.5 N)	8.54 lbf (38 N)
8017-0.375-0.468-5/8X11-CK	0.375 -0.001/-0.002 / +0.001	0.468	5/8 x 11	1.102	0.941	2.280	1.000	0.339	0.69	17	2.14 lbf (9.5 N)	8.54 lbf (38 N)

d₁ Pin -0.001/-0.002 Bore +0.001	l₁	d₂ Thread	d₃	k	l₂	l₃	l₄	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.156	0.234	5/16 x 18	0.630	0.551	1.382	0.630	0.201	0.38	2	0.90 lbf (4 N)	2.81 lbf (12.5 N)
0.187	0.312	3/8 x 16	0.748	0.630	1.571	0.752	0.189	0.50	4	1.12 lbf (5 N)	4.05 lbf (18 N)
0.250	0.375	1/2 x 13	0.906	0.791	1.890	0.870	0.228	0.56	13	1.35 lbf (6 N)	5.62 lbf (25 N)
0.312	0.468	5/8 x 11	1.102	0.941	2.280	1.000	0.339	0.69	17	1.91 lbf (8.5 N)	8.54 lbf (38 N)
0.375	0.468	5/8 x 11	1.102	0.941	2.280	1.000	0.339	0.69	17	2.14 lbf (9.5 N)	8.54 lbf (38 N)

3D Product Configurator

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$177.60

In Stock: 20

In Stock

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	99	Mex$177.60
100	249	Mex$162.80
250	499	Mex$148.00
≥ 500		Mex$133.20

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.022 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.

CAD Download

Other Data Formats

About CAD Downloads

Save as Favorites

GN 8017 Indexing Plungers Zinc Die-Cast, Lock-Out and Non Lock-Out

Photo

Product description

Information

Specification

Technical drawing

Part Options / Table

Type

Type: B - Non lock-out, without lock nut

Type: BK - Non lock-out, with lock nut

Type: C - Lock-out, without lock nut

Type: CK - Lock-out, with lock nut

Inch

Build & Price

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

B	Non lock-out, without lock nut
BK	Non lock-out, with lock nut
C	Lock-out, without lock nut
CK	Lock-out, with lock nut