Indexing Plungers GN 817.5

Product description

Information

Indexing plungers GN 817.5 make highly accurate positioning possible, by utilizing press-fit drill bushings DIN 172 / DIN 179 as a guide. The utilization of the drill bushing and either the guide bushings GN 172.1 or GN 179.1 provides two mating parts for the indexing plunger pin.

The conical shape of the plunger pin / indexing bore makes positioning virtually clearance-free and therefore highly precise.

The lock-out type C is used for applications where the plunger pin needs to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notch keeps the plunger in the retracted position.

Specification

Body
Steel, blackened finish

Plunger pin
Steel, hardened and ground

Knob
Plastic
Technopolymer (Polyamide PA)

Temperature resistant up to 230 °F (110 °C)
Black, matte finish
Not removable

RoHS

Accessory

Press-Fit Drill Bushings DIN 172 (Cylindrical, with Flange)
Press-Fit Drill Bushings DIN 179 (Cylindrical, without Flange)
Press-Fit Guide Bushings GN 172.1 (Conical, with Flange)
Press-Fit Guide Bushings GN 179.1 (Conical, without Flange)

Build & Price

Part Number B - Non lock-out	Part Number C - Lock-out	d₁ Pin -0.0004	l₁	l₂ Stroke	l₃	b	d₂	d₃	d₄	k	l₄	l₅	l₆	l₇	l₈ min.	max.	l₉	Spring load ≈ Initial	End


817.5-6-18-B	817.5-6-18-C	0.24 -0.0004	0.71	0.35	0.35	0.51	0.91	0.17	1.34	0.91	1.77	0.24	0.98	0.28	0.35	0.39	0.69	1.35 lbf (6 N)	5.62 lbf (25 N)
817.5-6-24-B	817.5-6-24-C	0.24 -0.0004	0.94	0.35	0.59	0.51	0.91	0.17	1.34	0.91	1.77	0.24	0.98	0.28	0.59	0.63	0.93	1.35 lbf (6 N)	5.62 lbf (25 N)
817.5-8-20-B	817.5-8-20-C	0.31 -0.0004	0.79	0.42	0.37	0.63	1.10	0.21	1.50	1.02	2.01	0.31	1.06	0.35	0.37	0.39	0.77	1.91 lbf (8.5 N)	6.29 lbf (28 N)
817.5-8-26-B	817.5-8-26-C	0.31 -0.0004	1.02	0.42	0.61	0.63	1.10	0.21	1.50	1.02	2.01	0.31	1.06	0.35	0.61	0.63	1.00	1.91 lbf (8.5 N)	6.29 lbf (28 N)
817.5-10-24-B	817.5-10-24-C	0.39 -0.0004	0.94	0.50	0.45	0.63	1.10	0.21	1.50	1.02	2.01	0.31	1.06	0.43	0.45	0.47	0.93	2.59 lbf (11.5 N)	8.99 lbf (40 N)
817.5-10-32-B	817.5-10-32-C	0.39 -0.0004	1.26	0.50	0.76	0.63	1.10	0.21	1.50	1.02	2.01	0.31	1.06	0.43	0.76	0.79	1.24	2.59 lbf (11.5 N)	8.99 lbf (40 N)

d₁ Pin -0.0004	l₁	l₂ Stroke	l₃	b	d₂	d₃	d₄	k	l₄	l₅	l₆	l₇	l₈ min.	max.	l₉	Spring load ≈ Initial	End

0.24	0.71	0.35	0.35	0.51	0.91	0.17	1.34	0.91	1.77	0.24	0.98	0.28	0.35	0.39	0.69	1.35 lbf (6 N)	5.62 lbf (25 N)
0.24	0.94	0.35	0.59	0.51	0.91	0.17	1.34	0.91	1.77	0.24	0.98	0.28	0.59	0.63	0.93	1.35 lbf (6 N)	5.62 lbf (25 N)
0.31	0.79	0.42	0.37	0.63	1.10	0.21	1.50	1.02	2.01	0.31	1.06	0.35	0.37	0.39	0.77	1.91 lbf (8.5 N)	6.29 lbf (28 N)
0.31	1.02	0.42	0.61	0.63	1.10	0.21	1.50	1.02	2.01	0.31	1.06	0.35	0.61	0.63	1.00	1.91 lbf (8.5 N)	6.29 lbf (28 N)
0.39	0.94	0.50	0.45	0.63	1.10	0.21	1.50	1.02	2.01	0.31	1.06	0.43	0.45	0.47	0.93	2.59 lbf (11.5 N)	8.99 lbf (40 N)
0.39	1.26	0.50	0.76	0.63	1.10	0.21	1.50	1.02	2.01	0.31	1.06	0.43	0.76	0.79	1.24	2.59 lbf (11.5 N)	8.99 lbf (40 N)

3D Product Configurator

Construction and Assembly Instructions

The length l₇ is determined by the penetration depth of the plunger pin into the cone of the bushing.

The length l₈ must ensure that the plunger pin fully disengages. Bushing length and plate thickness plus any gap can then be selected within certain margins.

When engaged, the pin hast to have a minimum remaining stroke of 0.5 mm to make sure that the conical section of the pin is located in the cone of the guide bushing without clearance.
For each plunger pin diameter d₁, two different pin lengths l₁ are available.

For a safe remaining stroke: l₉ = l₁ - 0.5 mm
For mounting the bushings with tolerance n6, a hole with tolerance H7, corresponding to the external diameter, is usually provided.

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$1,120.20

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	99	Mex$1,120.20
100	249	Mex$1,026.85
250	499	Mex$933.50
≥ 500		Mex$840.15

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.094 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.