Indexing Plungers GN 824

Photo

Type: B - Non lock-out, without lock nut

GN 824 Stainless Steel Indexing Plungers, with Chamfered Pin, Lock-Out and Non Lock-Out Type: BK - Non lock-out, with lock nut

GN 824 Stainless Steel Indexing Plungers, with Chamfered Pin, Lock-Out and Non Lock-Out Type: C - Lock-out, without lock nut

GN 824 Stainless Steel Indexing Plungers, with Chamfered Pin, Lock-Out and Non Lock-Out Type: CK - Lock-out, with lock nut

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 824 Print This Page List of Indexing Plunger Types ISO Fundamental Tolerances Plastic Characteristics Stainless Steel Characteristics

Product description

Information

Indexing plungers GN 824 have a plunger pin with square cross-section, a latching surface on one side and a chamfer on the other. When moving in the direction of the chamfered pin, the plunger pin passes over grooves and edges, as the chamfered pin moves the plunger pin into the guide. The plunger pin automatically latches into place when moved toward the latching surface. The latching can be released by pulling the knob.

Indexing plunger latch mechanisms with lock-out (type C / CK) are used for applications when the plunger pin is temporarily not to engage. In that case, the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

When the set screw is not tightened, the orientation of the bevel can be freely adjusted over a range of 360°. This can be identified by the marking on the indexing plunger guide.

Specification

Guide
Stainless steelNI AISI 303

Plunger pin
Stainless steel AISI 431, hardened

Knob
Plastic, Polyamide (PA)

Black, matte finish
Not removable

Set screw DIN 916
Stainless steel AISI 304

Spring
Stainless steel

Hex nut ISO 8675
Stainless steel AISI 304

RoHS

Accessory

Spacer Bushings GN 609.5

Build & Price

Part Number	b₁	l₁	b₂	d₁ Pin -0.0008/-0.0016 Bore H8	d₂	d₃	k	l₂	l₃	l₄	l₅	A/F₁	A/F₂	Spring load ≈ Initial	End

824-5-5-M12X1.5-B-NI	0.20	0.20	0.10	0.2756 -0.0008/-0.0016 / H8	M 12 x 1.5	0.91	0.79	2.02	0.79	0.44	0.04	0.67	0.08	2.02 lbf (9 N)	4.05 lbf (18 N)
824-6-6-M16X1.5-B-NI	0.24	0.24	0.12	0.3150 -0.0008/-0.0016 / H8	M 16 x 1.5	1.10	0.94	2.42	0.94	0.53	0.05	0.87	0.08	2.92 lbf (13 N)	5.17 lbf (23 N)
824-8-7.5-M16X1.5-B-NI	0.31	0.30	0.16	0.3937 -0.0008/-0.0016 / H8	M 16 x 1.5	1.10	0.94	2.42	0.94	0.53	0.05	0.87	0.08	3.37 lbf (15 N)	6.97 lbf (31 N)
824-9-8.5-M20X1.5-B-NI	0.35	0.33	0.18	0.4724 -0.0008/-0.0016 / H8	M 20 x 1.5	1.30	1.10	2.87	1.18	0.58	0.05	0.94	0.08	4.27 lbf (19 N)	7.64 lbf (34 N)

Part Number	b₁	l₁	b₂	d₁ Pin -0.0008/-0.0016 Bore H8	d₂	d₃	k	l₂	l₃	l₄	l₅	A/F₁	A/F₂	Spring load ≈ Initial	End

824-5-5-M12X1.5-BK-NI	0.20	0.20	0.10	0.2756 -0.0008/-0.0016 / H8	M 12 x 1.5	0.91	0.79	2.02	0.79	0.44	0.04	0.67	0.08	2.02 lbf (9 N)	4.05 lbf (18 N)
824-6-6-M16X1.5-BK-NI	0.24	0.24	0.12	0.3150 -0.0008/-0.0016 / H8	M 16 x 1.5	1.10	0.94	2.42	0.94	0.53	0.05	0.87	0.08	2.92 lbf (13 N)	5.17 lbf (23 N)
824-8-7.5-M16X1.5-BK-NI	0.31	0.30	0.16	0.3937 -0.0008/-0.0016 / H8	M 16 x 1.5	1.10	0.94	2.42	0.94	0.53	0.05	0.87	0.08	3.37 lbf (15 N)	6.97 lbf (31 N)
824-9-8.5-M20X1.5-BK-NI	0.35	0.33	0.18	0.4724 -0.0008/-0.0016 / H8	M 20 x 1.5	1.30	1.10	2.87	1.18	0.58	0.05	0.94	0.08	4.27 lbf (19 N)	7.64 lbf (34 N)

Part Number	b₁	l₁	b₂	d₁ Pin -0.0008/-0.0016 Bore H8	d₂	d₃	k	l₂	l₃	l₄	l₅	A/F₁	A/F₂	Spring load ≈ Initial	End

824-5-5-M12X1.5-C-NI	0.20	0.20	0.10	0.2756 -0.0008/-0.0016 / H8	M 12 x 1.5	0.91	0.79	2.02	0.79	0.44	0.04	0.67	0.08	2.02 lbf (9 N)	4.05 lbf (18 N)
824-6-6-M16X1.5-C-NI	0.24	0.24	0.12	0.3150 -0.0008/-0.0016 / H8	M 16 x 1.5	1.10	0.94	2.42	0.94	0.53	0.05	0.87	0.08	2.92 lbf (13 N)	5.17 lbf (23 N)
824-8-7.5-M16X1.5-C-NI	0.31	0.30	0.16	0.3937 -0.0008/-0.0016 / H8	M 16 x 1.5	1.10	0.94	2.42	0.94	0.53	0.05	0.87	0.08	3.37 lbf (15 N)	6.97 lbf (31 N)
824-9-8.5-M20X1.5-C-NI	0.35	0.33	0.18	0.4724 -0.0008/-0.0016 / H8	M 20 x 1.5	1.30	1.10	2.87	1.18	0.58	0.05	0.94	0.08	4.27 lbf (19 N)	7.64 lbf (34 N)

Part Number	b₁	l₁	b₂	d₁ Pin -0.0008/-0.0016 Bore H8	d₂	d₃	k	l₂	l₃	l₄	l₅	A/F₁	A/F₂	Spring load ≈ Initial	End

824-5-5-M12X1.5-CK-NI	0.20	0.20	0.10	0.2756 -0.0008/-0.0016 / H8	M 12 x 1.5	0.91	0.79	2.02	0.79	0.44	0.04	0.67	0.08	2.02 lbf (9 N)	4.05 lbf (18 N)
824-6-6-M16X1.5-CK-NI	0.24	0.24	0.12	0.3150 -0.0008/-0.0016 / H8	M 16 x 1.5	1.10	0.94	2.42	0.94	0.53	0.05	0.87	0.08	2.92 lbf (13 N)	5.17 lbf (23 N)
824-8-7.5-M16X1.5-CK-NI	0.31	0.30	0.16	0.3937 -0.0008/-0.0016 / H8	M 16 x 1.5	1.10	0.94	2.42	0.94	0.53	0.05	0.87	0.08	3.37 lbf (15 N)	6.97 lbf (31 N)
824-9-8.5-M20X1.5-CK-NI	0.35	0.33	0.18	0.4724 -0.0008/-0.0016 / H8	M 20 x 1.5	1.30	1.10	2.87	1.18	0.58	0.05	0.94	0.08	4.27 lbf (19 N)	7.64 lbf (34 N)

b₁	l₁	b₂	d₁ Pin -0.0008/-0.0016 Bore H8	d₂	d₃	k	l₂	l₃	l₄	l₅	A/F₁	A/F₂	Spring load ≈ Initial	End

0.20	0.20	0.10	0.2756	M 12 x 1.5	0.91	0.79	2.02	0.79	0.44	0.04	0.67	0.08	2.02 lbf (9 N)	4.05 lbf (18 N)
0.24	0.24	0.12	0.3150	M 16 x 1.5	1.10	0.94	2.42	0.94	0.53	0.05	0.87	0.08	2.92 lbf (13 N)	5.17 lbf (23 N)
0.31	0.30	0.16	0.3937	M 16 x 1.5	1.10	0.94	2.42	0.94	0.53	0.05	0.87	0.08	3.37 lbf (15 N)	6.97 lbf (31 N)
0.35	0.33	0.18	0.4724	M 20 x 1.5	1.30	1.10	2.87	1.18	0.58	0.05	0.94	0.08	4.27 lbf (19 N)	7.64 lbf (34 N)

3D Product Configurator

Assembly Instruction

The position of the latching surface can be freely adjusted by 360°.
Installation steps:

Loosen the set screw with a hex key.
Turn the knob to move the latching surface in the desired position.
Tighten the set screw with a hex key.

Application Examples

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$1,188.00

Call / Email for Delivery Time

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	24	Mex$1,627.56
25	49	Mex$1,491.93
50	99	Mex$1,356.30
≥ 100		Mex$1,220.67

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.104 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.

CAD Download

Other Data Formats

About CAD Downloads

Save as Favorites

GN 824 Indexing Plungers Stainless Steel, with Chamfered Pin, Lock-Out and Non Lock-Out

Photo

Product Family Stainless Steel

Product description

Information

Specification

Accessory

Technical drawing

Part Options / Table

Type

Type: B - Non lock-out, without lock nut

Type: BK - Non lock-out, with lock nut

Type: C - Lock-out, without lock nut

Type: CK - Lock-out, with lock nut

Metric

Build & Price

Assembly Instruction

Application Examples

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

B	Non lock-out, without lock nut
BK	Non lock-out, with lock nut
C	Lock-out, without lock nut
CK	Lock-out, with lock nut