Side Thrust Pins GN 713

Product description

Information

Spring loaded side thrust pins GN 713 are versatile and practical elements for holding, positioning and clamping of workpieces.

They eliminate costly alternatives, are space saving and easy to install. The protruding height of the thrust pin can be adjusted with the threaded body.

Version with seal used in applications involving a fluid or liquid.

For easy insertion a suitable installation tool GN 713.1 is available (see table).

Specification

Housing
Steel, zinc plated, blue passivated finish

Thrust pin
Steel
Hardened
Zinc plated, blue passivated

Thrust spring
Side thrust force light
Stainless steel AISI 301
Side thrust force medium
Spring steel, blackened
Side thrust force heavy
Spring steel, zinc plated, blue passivated

Seal
Chloroprene rubber (CR)

RoHS

Accessory

Installation Tools GN 713.1 (Part number, see table)

Build & Price

Part Number SB - Steel thrust pin, with seal	d₁	Side thrust force F₀ ≈ at l₂	l₁ -0.08	d₂	a₁	a₂


713-5-20-11.5-SB	0.20	4.50 lbf (20 N)	0.45 -0.08	M 12	0.10	0.22
713-5-20-19-SB	0.20	4.50 lbf (20 N)	0.75 -0.08	M 12	0.10	0.22
713-5-50-11.5-SB	0.20	11.24 lbf (50 N)	0.45 -0.08	M 12	0.10	0.22
713-5-50-19-SB	0.20	11.24 lbf (50 N)	0.75 -0.08	M 12	0.10	0.22
713-5-100-11.5-SB	0.20	22.48 lbf (100 N)	0.45 -0.08	M 12	0.10	0.22
713-5-100-19-SB	0.20	22.48 lbf (100 N)	0.75 -0.08	M 12	0.10	0.22
713-6-40-11.5-SB	0.24	8.99 lbf (40 N)	0.45 -0.08	M 12	0.12	0.30
713-6-40-19-SB	0.24	8.99 lbf (40 N)	0.75 -0.08	M 12	0.12	0.30
713-6-75-11.5-SB	0.24	16.86 lbf (75 N)	0.45 -0.08	M 12	0.12	0.30
713-6-75-19-SB	0.24	16.86 lbf (75 N)	0.75 -0.08	M 12	0.12	0.30
713-6-100-11.5-SB	0.24	22.48 lbf (100 N)	0.45 -0.08	M 12	0.12	0.30
713-6-100-19-SB	0.24	22.48 lbf (100 N)	0.75 -0.08	M 12	0.12	0.30
713-10-100-18-SB	0.39	22.48 lbf (100 N)	0.71 -0.08	M 18 x 1.5	0.20	0.42
713-10-100-31.5-SB	0.39	22.48 lbf (100 N)	1.24 -0.08	M 18 x 1.5	0.20	0.42
713-10-150-18-SB	0.39	33.72 lbf (150 N)	0.71 -0.08	M 18 x 1.5	0.20	0.42
713-10-150-31.5-SB	0.39	33.72 lbf (150 N)	1.24 -0.08	M 18 x 1.5	0.20	0.42
713-10-205-18-SB	0.39	46.09 lbf (205 N)	0.71 -0.08	M 18 x 1.5	0.20	0.42
713-10-205-31.5-SB	0.39	46.09 lbf (205 N)	1.24 -0.08	M 18 x 1.5	0.20	0.42

d₁	k	l₂	l₃	s	w	x₁	x₂	Part number installation tool

0.20	1.5 x 45°	0.26	0.24	0.39	0.06	0.07	0.05	713.1-5.6
0.20	1.5 x 45°	0.26	0.24	0.39	0.06	0.07	0.05	713.1-5.6
0.20	1.5 x 45°	0.26	0.24	0.39	0.06	0.07	0.05	713.1-5.6
0.20	1.5 x 45°	0.26	0.24	0.39	0.06	0.07	0.05	713.1-5.6
0.20	1.5 x 45°	0.26	0.24	0.39	0.06	0.07	0.05	713.1-5.6
0.20	1.5 x 45°	0.26	0.24	0.39	0.06	0.07	0.05	713.1-5.6
0.24	1.5 x 45°	0.42	0.39	0.39	0.07	0.07	0.06	713.1-5.6
0.24	1.5 x 45°	0.42	0.39	0.39	0.07	0.07	0.06	713.1-5.6
0.24	1.5 x 45°	0.42	0.39	0.39	0.07	0.07	0.06	713.1-5.6
0.24	1.5 x 45°	0.42	0.39	0.39	0.07	0.07	0.06	713.1-5.6
0.24	1.5 x 45°	0.42	0.39	0.39	0.07	0.07	0.06	713.1-5.6
0.24	1.5 x 45°	0.42	0.39	0.39	0.07	0.07	0.06	713.1-5.6
0.39	2 x 45°	0.66	0.63	0.63	0.13	0.13	0.11	713.1-10
0.39	2 x 45°	0.66	0.63	0.63	0.13	0.13	0.11	713.1-10
0.39	2 x 45°	0.66	0.63	0.63	0.13	0.13	0.11	713.1-10
0.39	2 x 45°	0.66	0.63	0.63	0.13	0.13	0.11	713.1-10
0.39	2 x 45°	0.66	0.63	0.63	0.13	0.13	0.11	713.1-10
0.39	2 x 45°	0.66	0.63	0.63	0.13	0.13	0.11	713.1-10

d₁	Side thrust force F₀ ≈ at l₂	l₁ -0.08	d₂	a₁	a₂

0.20	4.50 lbf (20 N)	11.24 lbf (50 N)	22.48 lbf (100 N)	0.45	0.75	1.04*	M 12	0.10	0.22
0.24	8.99 lbf (40 N)	16.86 lbf (75 N)	22.48 lbf (100 N)	0.45	0.75	1.04*	M 12	0.12	0.30
0.39	22.48 lbf (100 N)	33.72 lbf (150 N)	46.09 lbf (205 N)	0.71	1.24	1.77*	M 18 x 1.5	0.20	0.42

d₁	k	l₂	l₃	s	w	x₁	x₂	Part number installation tool

0.20	1.5 x 45°	0.26	0.24	0.39	0.06	0.07	0.05	713.1-5.6
0.24	1.5 x 45°	0.42	0.39	0.39	0.07	0.07	0.06	713.1-5.6
0.39	2 x 45°	0.66	0.63	0.63	0.13	0.13	0.11	713.1-10

3D Product Configurator

Technical and Assembly Instructions


				w = Movement of thrust pin F = Side thrustforce in N / Ibf F₀ = Initial thrust 1.1 x F₀ = End thrust a₂ - a₁ = Clamping range for workpiece x = Distance centre line – Thrust point at w/2 x₁ for highest thrust point (a₁) x₂ for lowest thrust point (a₂) l₀ = Distance end stop – Bore of side thrust pin l₀ = l_m + x l_m = average length of workpiece (l_max + l_min) / 2 For thrust points (workpiece heights) between a₁ and a₂ a value for x lying between x₁ and x₂ has to be used (interpolation).
				By observing the above values the full movement of the side thrust pin will be available to cover the tolerance of the workpiece.
				For inserting the side thrust pins the use of Installation Tools GN 715.1 or Installation Tools GN 713.1 is recommended.

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$385.20

In Stock: 8

In Stock

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	49	Mex$385.20
50	99	Mex$353.10
100	249	Mex$321.00
≥ 250		Mex$288.90

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.008 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.