Spacers GN 6226

Photo

Type: A1 - Through hole
Sealing ring material: H - H-NBR

GN 6226 Stainless Steel AISI 316L Spacers in Hygienic Design Type: A1 - Through hole
Sealing ring material: E - EPDM

GN 6226 Stainless Steel AISI 316L Spacers in Hygienic Design Type: A2 - Through hole with continuous thread
Sealing ring material: E - EPDM

GN 6226 Stainless Steel AISI 316L Spacers in Hygienic Design Type: A2 - Through hole with continuous thread
Sealing ring material: H - H-NBR

GN 6226 Stainless Steel AISI 316L Spacers in Hygienic Design Type: A3 - Through hole with thread on both sides
Sealing ring material: E - EPDM

GN 6226 Stainless Steel AISI 316L Spacers in Hygienic Design Type: A3 - Through hole with thread on both sides
Sealing ring material: H - H-NBR

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Product Family Hygienic Design

Standard Parts of the “Hygienic Design” product family are labeled with the HD icon. They combine high surface quality, freedom from dead spaces, non-scooped outer surfaces, and sealed bolting areas. A sealing concept based on FEM calculations ensures reliable contact pressure after installation.

suitable for use in hygienically sensitive areas
quick and easy cleaning
no dead spaces due to functional seals
certified according to EHEDG guidelines

Show all Hygienic Design products

FDA compliant

Standard Sheet GN 6226 Print This Page EHEDG Certification (coming soon...) EHEDG Certification DGUV Certification Hygienic Design Information Hygienic Design - Leaflet Plastic Characteristics Stainless Steel Characteristics

Product description

Information

Spacers GN 6226 are certified according to EHEDG and DGUV Test guidelines and are intended for use in hygiene areas. The sealed mounting surfaces enable fastening without dead spaces. The high quality finish prevents adherence of dirt and facilitates cleaning.

Spacers are used to fasten parts at an offset parallel to their plane of installation. This avoids doubling up on surfaces and leaves space for cleaning. The internal thread can alternatively be used as a through hole by a screw with a smaller thread.

Specification

Body
Stainless steel AISI 316L
Matte finish (Ra < 0.8 µm)MT

Sealing ring

H-NBRH
Temperature resistant -13 °F to +302 °F
(-25 °C to +150 °C)
EPDME
Temperature resistant -40 °F to +248 °F
(-40 °C to +120 °C)
Blue
Hardness 85 ±5 Shore A
FDA compliant

RoHS

Accessory

Sealing Rings GN 7600

On request

with FKM sealing ring (Fluorine rubber) F

Build & Price

Part Number H - H-NBR	Part Number E - EPDM	d₁	Length l ±0.004 Type A1	Type A2	Length l ±0.008 Type A3	d₂ Through hole for screw	d₃ Thread	d₄	d₅	t min.

6226-22-20-A2-MT-H	6226-22-20-A2-MT-E	0.87	-	0.787	-	M 5	M 6	0.71	0.90	-
6226-28-30-A2-MT-H	6226-28-30-A2-MT-E	1.10	-	1.181	-	M 6	M 8	0.94	1.13	-
6226-34-30-A2-MT-H	6226-34-30-A2-MT-E	1.34	-	1.181	-	M 8	M 10	1.18	1.37	-

Part Number H - H-NBR	Part Number E - EPDM	d₁	Length l ±0.004 Type A1	Type A2	Length l ±0.008 Type A3	d₂ Through hole for screw	d₃ Thread	d₄	d₅	t min.

6226-22-10-A1-MT-H	6226-22-10-A1-MT-E	0.87	0.394 ±0.004	-	-	M 5	-	0.71	0.90	-
6226-22-12-A1-MT-H	6226-22-12-A1-MT-E	0.87	0.472 ±0.004	-	-	M 5	-	0.71	0.90	-
6226-22-16-A1-MT-H	6226-22-16-A1-MT-E	0.87	0.630 ±0.004	-	-	M 5	-	0.71	0.90	-
6226-28-12-A1-MT-H	6226-28-12-A1-MT-E	1.10	0.472 ±0.004	-	-	M 6	-	0.94	1.13	-
6226-28-16-A1-MT-H	6226-28-16-A1-MT-E	1.10	0.630 ±0.004	-	-	M 6	-	0.94	1.13	-
6226-28-20-A1-MT-H	6226-28-20-A1-MT-E	1.10	0.787 ±0.004	-	-	M 6	-	0.94	1.13	-
6226-34-12-A1-MT-H	6226-34-12-A1-MT-E	1.34	0.472 ±0.004	-	-	M 8	-	1.18	1.37	-
6226-34-16-A1-MT-H	6226-34-16-A1-MT-E	1.34	0.630 ±0.004	-	-	M 8	-	1.18	1.37	-
6226-34-20-A1-MT-H	6226-34-20-A1-MT-E	1.34	0.787 ±0.004	-	-	M 8	-	1.18	1.37	-

Part Number H - H-NBR	Part Number E - EPDM	d₁	Length l ±0.004 Type A1	Type A2	Length l ±0.008 Type A3	d₂ Through hole for screw	d₃ Thread	d₄	d₅	t min.

6226-22-30-A3-MT-H	6226-22-30-A3-MT-E	0.87	-	-	1.181 ±0.008	M 5	M 6	0.71	0.90	0.47
6226-22-50-A3-MT-H	6226-22-50-A3-MT-E	0.87	-	-	1.969 ±0.008	M 5	M 6	0.71	0.90	0.47
6226-28-50-A3-MT-H	6226-28-50-A3-MT-E	1.10	-	-	1.969 ±0.008	M 6	M 8	0.94	1.13	0.63
6226-28-75-A3-MT-H	6226-28-75-A3-MT-E	1.10	-	-	2.953 ±0.008	M 6	M 8	0.94	1.13	0.63
6226-34-50-A3-MT-H	6226-34-50-A3-MT-E	1.34	-	-	1.969 ±0.008	M 8	M 10	1.18	1.37	0.79
6226-34-100-A3-MT-H	6226-34-100-A3-MT-E	1.34	-	-	3.937 ±0.008	M 8	M 10	1.18	1.37	0.79

d₁	Length l ±0.004 Type A1	Type A2	Length l ±0.008 Type A3	d₂ Through hole for screw	d₃ Thread	d₄	d₅	t min.

0.87	0.394	0.472	0.630	0.787	1.181	1.969	M 5	M 6	0.71	0.90	0.47
1.10	0.472	0.630	0.787	1.181	1.969	2.953	M 6	M 8	0.94	1.13	0.63
1.34	0.472	0.630	0.787	1.181	1.969	3.937	M 8	M 10	1.18	1.37	0.79

3D Product Configurator

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$616.20

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	24	Mex$616.20
25	49	Mex$564.85
50	99	Mex$513.50
≥ 100		Mex$462.15

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.057 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.