Double Leaf Lift-Off Hinges GN 2292

Photo

Type: A - Exterior hinge leafs
Identification: C - With countersunk holes
Bildzuordnung: 82

Accessories for Profile Systems

Standard elements in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Winco standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

compatible with the common profile systems
for groove widths of 6, 8 and 10 mm
for profiles 30, 40 and 45 mm

Show All Compatible Products

Product description

Information

Double leaf lift-off hinges GN 2292 are made of drawn profiled aluminum and can be used on doors and covers. The positioning guide allows them to be quickly and easily mounted to all commercially available profile systems with a nominal size of 40 mm and slot width “n”.

External hinge leaf, type A hinges, allow mounting with a very small door gap. Type I hinges are mounted between the door gap. This results in the mounting screws being hidden when the door is closed, which reduces the chance of vandalism.

The hinges are delivered loose and must be mounted according to the accompanying instructions. Any hinge combination may be created thanks to the modular design and available accessories.

Specification

Body
Aluminum
Anodized finish, natural colorEL

Bearing bushing / cover cap
Plastic
Technopolymer (Polyamide PA)
Gray, RAL 7035

Tapered dowel pin ISO 8741
Steel, zinc plated, blue passivated finish

RoHS

On request

Other lengths and hole spacings
Other finishes

Build & Price

Part Number	l₁ Type A	Type I	l₂	d₁	d₂	l₃	l₄	l₅	m₁ Type A	Type I	m₂	m₃	m₄	n -0.012	s₁	s₂

2292-72-82-A-C-EL	2.83	-	3.23	0.26	0.55	1.57	1.42	-	1.61	-	1.65	-	-	0.315 -0.012	0.14	0.26
2292-72-162-A-C-EL	2.83	-	6.38	0.26	0.55	3.15	1.42	-	1.61	-	-	1.97	1.26	0.315 -0.012	0.14	0.26

Part Number	l₁ Type A	Type I	l₂	d₁	d₂	l₃	l₄	l₅	m₁ Type A	Type I	m₂	m₃	m₄	n -0.012	s₁	s₂

2292-86-82-I-C-EL	-	3.39	3.23	0.26	0.55	1.57	-	1.69	-	2.17	1.65	-	-	0.315 -0.012	0.14	0.26
2292-86-162-I-C-EL	-	3.39	6.38	0.26	0.55	3.15	-	1.69	-	2.17	-	1.97	1.26	0.315 -0.012	0.14	0.26

l₁ Type A	Type I	l₂	d₁	d₂	l₃	l₄	l₅	m₁ Type A	Type I	m₂	m₃	m₄	n -0.012	s₁	s₂

2.83	3.39	3.23	0.26	0.55	1.57	1.42	1.69	1.61	2.17	1.65	-	-	0.315	0.14	0.26
2.83	3.39	6.38	0.26	0.55	3.15	1.42	1.69	1.61	2.17	-	1.97	1.26	0.315	0.14	0.26

3D Product Configurator

Width l₁ (Form A)

2.83

Width l₁ (Form I)

3.39

Length l₂

3.23

6.38

Type

A - Exterior hinge leafs

I - Interior hinge leafs

Identification

C - With countersunk holes

Finish

EL - Anodized finish, natural color

Mounting Information


							Left / right hinges Right or left hinges can be created by the direction in which the bearing bushings are inserted into the hinge leaf.
							Mounting on door frames For mounting a door that should be removable, two hinges of the same type must be attached to the door frame. If the door is not supposed to be removable, the door must be mounted with at least one right hinge and one left hinge.
							Assembly Position the bearing bushing with the desired installation direction on the hinge leaf. Then insert a screw with a collar such as an ISO 7380 oval head screw into the bearing bushing to protect the bearing bushing collar from damage while hammering in. Hammer in the bearing bushing until about 1 mm remains between the bearing bushing collar and the hinge wing. Remove the burr on the bearing bushing using a knife. Hammer in the bearing bushing all the way. Remove the screw. Hammer a tapered dowel pin into the bearing bushing. Place the cover cap on the opposite side of the hinge wing. Insert the other bearing bushings according to points 1 to 5.

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$540.00

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	99	Mex$739.80
100	249	Mex$678.15
250	499	Mex$616.50
≥ 500		Mex$554.85

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.145 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.