Hinges with Integrated Safety Switch GN 139.1

Product description

Information

GN 139.1 hinges with integrated safety switch have been designed for use on monitoring doors and covers of machines and equipment. Opening the door activates the switch contacts. This causes an interruption in a protective circuit via broken contact (NC) and at the same time signals the door opening by closing a normally open contact element (NO).

The contact blocks include positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached is adjustable.

The compact construction combines safety and attractive design. The hinges are tamper-proof because of the covered mounting from the backside.

Specification

Body
Zinc die-cast
Powder coated
Silver metallic

Pin
Stainless steel AISI 303

RoHS

On request

Hinges with operating angle > 0°
Hinges with other contact load ratings

Technical drawing

GN 139.1 Zinc Die-Cast Hinges with Integrated Safety Switch, with Connector Plug sketch

Hide technical drawing

l₁ Small hinge wing	Broad hinge wing	l₂	l₃	l₄	l₅ Small hinge wing	Broad hinge wing	h₁	h₂	m₁	m₂	m₃ Small hinge wing	Broad hinge wing

1.93	3.11	3.98	1.18	3.19	0.59	1.18	0.47	0.89	2.80	0.67	1.06	1.97

Build & Price

3D Product Configurator

Width l₁

1.93

3.11

Length l₂

3.98

Type

A - Connector plug at the top

B - Connector plug at the bottom

C - Connector plug at the backside (with 0.2 m cable)

Mechanical Features

Maximal load

Information with safety factor

Load
direction

Drawing Mechanical Features GN 139.1 / GN 139.2

Drawing Mechanical features2 GN 139.1/139.2

Drawing Mechanical features3 GN 139.1/139.2

Examples of calculation
→ see operating instruction

l₁= 49 mm

337.21 lbf (1500 N)

224.81 lbf (1000 N)

l₁= 79 mm

168.61 lbf (750 N)

112.40 lbf (500 N)

Assembly

From the backside, 7 x threads M5, 6 mm deep

Recommended torque

5 Nm (Screws M5)

Protection class

IP67 / IP69K
(Mind the cable conduit!)

acc. to EN 60529

Switching principle, contact opening

Slow-action contacts
force-fitted, with positive opening

acc. to IEC 60947-5-1, K

Contact material

Silver alloy

Operating travel diagram
(scheme)

The switching points are adjustable up to 4° in direction of 0°.

→ see operating instruction

Drawing Operating travel diagram GN 139.1

Maximum operating frequency

600 operating cycles / hour

acc. to IEC 60947-5-1
one operating cycle includes one opening and one closing action

Mechanical life span

10⁶ operating cycles

Actuating speed

min. 2° / second, max. 90° / second

Electrical Features / Safety Features

Utilization Category

DC 13: 24 Vdc / 2 A (with connector plug)
AC 15: 24 Vac / 2 A

acc. to EN 60947-5-1

Contact termination
8-pole connector M12

Pin and cable assignment

Drawing Electrical features GN 139.1 / 139.2

Type of cable

7 x0.5 mm², jacket PVC H05VV-F

acc. to IEC 60332-1-2 et seqq.

Short-circuit current

1000 A

acc. to EN 60947-5-1

Rated insulation voltage

30 V AC / 36 V DC (connector plug) / 250 VAC (cable)

Short-circuit protection

2 A, 500 V, Type gG (connector plug) / 6 A, 500 V, Type gG (cable)

Ambient temperature

13 °F up to 176 °F (-25 °C up to + 80 °C)

Degree of pollution, external

acc. to EN 60947-5-1

Mission time (T_M)

20 years

acc. to EN ISO 13849-1

Number of cycles (B10 d)

5 000 000

acc. to EN 61820-2

Approvals, Conformities, Applicability


Low-voltage switchgear and controlgear CE declaration IMQ: CA02.03746 UL: E 131787		EN 60947-1/2007 EN 60947-1-5 : 2004 + A1/2009
Safety applications	until SIL 3 / PL e	acc. to EN ISO 13849-1
Other important details and hints are given in the operating instructions for GN 139.1 hinges which are included with every hinge and which are also available as PDF downloads from “www.jwwinco.com“ under “Service“. The hinges with integrated safety switch must be mounted and commissioned by qualified technical personnel in compliance with the details given in the operating instructions and with the national and international rules and regulations and the applicable standards. JW Winco will assume no statutory liability for missing or incorrect information and for any consequences arising therefrom.

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$5,532.60

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	9	Mex$7,579.66
10	24	Mex$6,948.02
25	49	Mex$6,316.39
≥ 50		Mex$5,684.75

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.716 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.