Fluid Fill Plugs EN 548.1

Product description

Information

For thread sizes G 1/2 and larger, the seal of EN 548.1 fluid fill plugs is embedded in a radial recess, and thus cannot be lost or squeezed out during tightening.

MIN-MAX markings can easily be applied on the flat sides of the dipstick (see GN 109).

Specification

Body
Plastic
Technopolymer (Polyamide PA)

Black, matte finish
Temperature resistant up to 212 °F (100 °C)

Seal
Rubber NBR (Perbunan^®)

Dipstick
Steel, phosphate-treated

RoHS

On request

Fluid level markings / special lengths
see GN 109

Build & Price

Part Number A - Without dipstick	Part Number B - With dipstick	d₁ Pipe thread	d₂	l₁	l₂	l₃


251GDAK	251GDAL	G 1/4	0.81	0.35	0.75	7.56
38GDAK	38GDAL	G 3/8	0.98	0.35	0.83	7.56
50GDAK	50GDAL	G 1/2	1.10	0.43	0.98	7.44
75GDAK	75GDAL	G 3/4	1.34	0.47	1.06	7.40
1GDAK	1GDAL	G 1	1.65	0.51	1.14	7.40
125GDAK	125GDAL	G 1 1/4	2.05	0.51	1.26	7.28
112GDAK	112GDAL	G 1 1/2	2.24	0.51	1.38	7.28

d₁ Pipe thread	d₂	l₁	l₂	l₃

G 1/4	0.81	0.35	0.75	7.56
G 3/8	0.98	0.35	0.83	7.56
G 1/2	1.10	0.43	0.98	7.44
G 3/4	1.34	0.47	1.06	7.40
G 1	1.65	0.51	1.14	7.40
G 1 1/4	2.05	0.51	1.26	7.28
G 1 1/2	2.24	0.51	1.38	7.28

3D Product Configurator

GN 109 Fluid Level Markings / Special Lengths (Special Order)



For the series with dipstick shown above, a shortening and / or the attachment of level markings can be ordered with the service GN 109. The dipstick is shortened to the length l₁ and the marking notches are milled at l₂ or l₃, making them easily visible. The max. length l₁ is specified in the respective series. The length specifications l₁ to l₃ refer to the contact surface without seal, with a tolerance of ±1 mm to be taken into account. For critical applications, the seal must be taken into consideration with a thickness of up to 2 mm, depending on the series. If required, more than 2 notches may be inserted on request, which are then specified by appropriate details on the position (l₄ ... l_x). Furthermore, texts such as MAX / MIN may be laser-engraved in addition to or instead of the notches by submitting the appropriate template. The fluid level markings / special lengths GN 109 are to be ordered as a separate item in shopping cart step 1 under note.