Cam Roller Linear Guide Rail Systems GN 1490

Type: A5 - With one cam roller carriage with 5 rollers
Identification no.: 1 - With one end stop
Material: NI - Stainless steel

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

FDA compliant

Standard Sheet GN 1490 Print This Page Mounting Holes, Mounting Screws / Lubrication and Maintenance Mounting and Technical Information for GN 1490 Operating Instruction GN 1490 Stainless Steel Characteristics

Product description

Cam roller linear guide rail systems GN 1490 are usually side-mounted and installed in pairs, either in a vertical (as shown) or a horizontal position. They are used for simple, linear movements, such as in automation or in vehicle and machine engineering.

Optimal travel properties combined with low maintenance requirements can be achieved with cam roller carriages matched to the guide rails without any play. The system is ready for use immediately after insertion of the cam roller carriage.

The cam roller linear guide rail systems consist of a guide rail, one or two cam roller carriages and the selected number of end stops. The parts are delivered unassembled. The guide rail can be installed on either the left or right side of the application. When installing the cam roller carriages, the direction in which the load is received (marking notch) must be taken into account. The lubrication and maintenance instructions must be followed.

Specification

Guide rail
Stainless steelNI AISI 430
Plain finish

Cam roller carriage

Base body
Stainless steel AISI 304
Cam roller
Ball-bearing, 2RS
Stainless steel AISI 440C
Roller bearing grease
FDA compliant, class H1
Lifetime-lubricated

End stop
Stainless steel AISI 304
Rubber stop (TPU) ≈ 80 shore A

Operating temperature
-4 °F to +212 °F (-20 °C to +100 °C)

RoHS

On request

Other guide rail lengths,
up to 157 inches (3,994 mm)
Other hole spacings / finishes

Hide technical drawing

Part Options / Table

Type

A3	With one cam roller carriage with 3 rollers
A5	With one cam roller carriage with 5 rollers
B3	With two cam roller carriages with 3 rollers
B5	With two cam roller carriages with 5 rollers

Identification no.

0	Without end stop
1	With one end stop
2	With two end stops

Part Number A3 - With one cam roller carriage with 3 rollers	Part Number A5 - With one cam roller carriage with 5 rollers	Part Number B3 - With two cam roller carriages with 3 rollers	Part Number B5 - With two cam roller carriages with 5 rollers	h₁	l₁ ± 0.04	b	h₂	l₂ Cam roller carriage 3 rollers	5 rollers	F_R per cam roller carriage 3 rollers	5 rollers	F_A per cam roller carriage 3 rollers	5 rollers

1490-29-394-A3-0-NI	1490-29-394-A5-0-NI	1490-29-394-B3-0-NI	1490-29-394-B5-0-NI	1.14	15.51 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-474-A3-0-NI	1490-29-474-A5-0-NI	1490-29-474-B3-0-NI	1490-29-474-B5-0-NI	1.14	18.66 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-554-A3-0-NI	1490-29-554-A5-0-NI	1490-29-554-B3-0-NI	1490-29-554-B5-0-NI	1.14	21.81 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-634-A3-0-NI	1490-29-634-A5-0-NI	1490-29-634-B3-0-NI	1490-29-634-B5-0-NI	1.14	24.96 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-714-A3-0-NI	1490-29-714-A5-0-NI	1490-29-714-B3-0-NI	1490-29-714-B5-0-NI	1.14	28.11 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-794-A3-0-NI	1490-29-794-A5-0-NI	1490-29-794-B3-0-NI	1490-29-794-B5-0-NI	1.14	31.26 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-874-A3-0-NI	1490-29-874-A5-0-NI	1490-29-874-B3-0-NI	1490-29-874-B5-0-NI	1.14	34.41 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-954-A3-0-NI	1490-29-954-A5-0-NI	1490-29-954-B3-0-NI	1490-29-954-B5-0-NI	1.14	37.56 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-1034-A3-0-NI	1490-29-1034-A5-0-NI	1490-29-1034-B3-0-NI	1490-29-1034-B5-0-NI	1.14	40.71 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-1194-A3-0-NI	1490-29-1194-A5-0-NI	1490-29-1194-B3-0-NI	1490-29-1194-B5-0-NI	1.14	47.01 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-1434-A3-0-NI	1490-29-1434-A5-0-NI	1490-29-1434-B3-0-NI	1490-29-1434-B5-0-NI	1.14	56.46 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-37-394-A3-0-NI	1490-37-394-A5-0-NI	1490-37-394-B3-0-NI	1490-37-394-B5-0-NI	1.46	15.51 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-474-A3-0-NI	1490-37-474-A5-0-NI	1490-37-474-B3-0-NI	1490-37-474-B5-0-NI	1.46	18.66 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-554-A3-0-NI	1490-37-554-A5-0-NI	1490-37-554-B3-0-NI	1490-37-554-B5-0-NI	1.46	21.81 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-634-A3-0-NI	1490-37-634-A5-0-NI	1490-37-634-B3-0-NI	1490-37-634-B5-0-NI	1.46	24.96 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-714-A3-0-NI	1490-37-714-A5-0-NI	1490-37-714-B3-0-NI	1490-37-714-B5-0-NI	1.46	28.11 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-794-A3-0-NI	1490-37-794-A5-0-NI	1490-37-794-B3-0-NI	1490-37-794-B5-0-NI	1.46	31.26 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-874-A3-0-NI	1490-37-874-A5-0-NI	1490-37-874-B3-0-NI	1490-37-874-B5-0-NI	1.46	34.41 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-954-A3-0-NI	1490-37-954-A5-0-NI	1490-37-954-B3-0-NI	1490-37-954-B5-0-NI	1.46	37.56 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-1034-A3-0-NI	1490-37-1034-A5-0-NI	1490-37-1034-B3-0-NI	1490-37-1034-B5-0-NI	1.46	40.71 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-1194-A3-0-NI	1490-37-1194-A5-0-NI	1490-37-1194-B3-0-NI	1490-37-1194-B5-0-NI	1.46	47.01 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-1434-A3-0-NI	1490-37-1434-A5-0-NI	1490-37-1434-B3-0-NI	1490-37-1434-B5-0-NI	1.46	56.46 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)

Part Number A3 - With one cam roller carriage with 3 rollers	Part Number A5 - With one cam roller carriage with 5 rollers	Part Number B3 - With two cam roller carriages with 3 rollers	Part Number B5 - With two cam roller carriages with 5 rollers	h₁	l₁ ± 0.04	b	h₂	l₂ Cam roller carriage 3 rollers	5 rollers	F_R per cam roller carriage 3 rollers	5 rollers	F_A per cam roller carriage 3 rollers	5 rollers

1490-29-394-A3-1-NI	1490-29-394-A5-1-NI	1490-29-394-B3-1-NI	1490-29-394-B5-1-NI	1.14	15.51 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-474-A3-1-NI	1490-29-474-A5-1-NI	1490-29-474-B3-1-NI	1490-29-474-B5-1-NI	1.14	18.66 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-554-A3-1-NI	1490-29-554-A5-1-NI	1490-29-554-B3-1-NI	1490-29-554-B5-1-NI	1.14	21.81 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-634-A3-1-NI	1490-29-634-A5-1-NI	1490-29-634-B3-1-NI	1490-29-634-B5-1-NI	1.14	24.96 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-714-A3-1-NI	1490-29-714-A5-1-NI	1490-29-714-B3-1-NI	1490-29-714-B5-1-NI	1.14	28.11 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-794-A3-1-NI	1490-29-794-A5-1-NI	1490-29-794-B3-1-NI	1490-29-794-B5-1-NI	1.14	31.26 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-874-A3-1-NI	1490-29-874-A5-1-NI	1490-29-874-B3-1-NI	1490-29-874-B5-1-NI	1.14	34.41 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-954-A3-1-NI	1490-29-954-A5-1-NI	1490-29-954-B3-1-NI	1490-29-954-B5-1-NI	1.14	37.56 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-1034-A3-1-NI	1490-29-1034-A5-1-NI	1490-29-1034-B3-1-NI	1490-29-1034-B5-1-NI	1.14	40.71 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-1194-A3-1-NI	1490-29-1194-A5-1-NI	1490-29-1194-B3-1-NI	1490-29-1194-B5-1-NI	1.14	47.01 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-1434-A3-1-NI	1490-29-1434-A5-1-NI	1490-29-1434-B3-1-NI	1490-29-1434-B5-1-NI	1.14	56.46 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-37-394-A3-1-NI	1490-37-394-A5-1-NI	1490-37-394-B3-1-NI	1490-37-394-B5-1-NI	1.46	15.51 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-474-A3-1-NI	1490-37-474-A5-1-NI	1490-37-474-B3-1-NI	1490-37-474-B5-1-NI	1.46	18.66 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-554-A3-1-NI	1490-37-554-A5-1-NI	1490-37-554-B3-1-NI	1490-37-554-B5-1-NI	1.46	21.81 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-634-A3-1-NI	1490-37-634-A5-1-NI	1490-37-634-B3-1-NI	1490-37-634-B5-1-NI	1.46	24.96 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-714-A3-1-NI	1490-37-714-A5-1-NI	1490-37-714-B3-1-NI	1490-37-714-B5-1-NI	1.46	28.11 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-794-A3-1-NI	1490-37-794-A5-1-NI	1490-37-794-B3-1-NI	1490-37-794-B5-1-NI	1.46	31.26 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-874-A3-1-NI	1490-37-874-A5-1-NI	1490-37-874-B3-1-NI	1490-37-874-B5-1-NI	1.46	34.41 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-954-A3-1-NI	1490-37-954-A5-1-NI	1490-37-954-B3-1-NI	1490-37-954-B5-1-NI	1.46	37.56 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-1034-A3-1-NI	1490-37-1034-A5-1-NI	1490-37-1034-B3-1-NI	1490-37-1034-B5-1-NI	1.46	40.71 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-1194-A3-1-NI	1490-37-1194-A5-1-NI	1490-37-1194-B3-1-NI	1490-37-1194-B5-1-NI	1.46	47.01 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-1434-A3-1-NI	1490-37-1434-A5-1-NI	1490-37-1434-B3-1-NI	1490-37-1434-B5-1-NI	1.46	56.46 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)

Part Number A3 - With one cam roller carriage with 3 rollers	Part Number A5 - With one cam roller carriage with 5 rollers	Part Number B3 - With two cam roller carriages with 3 rollers	Part Number B5 - With two cam roller carriages with 5 rollers	h₁	l₁ ± 0.04	b	h₂	l₂ Cam roller carriage 3 rollers	5 rollers	F_R per cam roller carriage 3 rollers	5 rollers	F_A per cam roller carriage 3 rollers	5 rollers

1490-29-394-A3-2-NI	1490-29-394-A5-2-NI	1490-29-394-B3-2-NI	1490-29-394-B5-2-NI	1.14	15.51 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-474-A3-2-NI	1490-29-474-A5-2-NI	1490-29-474-B3-2-NI	1490-29-474-B5-2-NI	1.14	18.66 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-554-A3-2-NI	1490-29-554-A5-2-NI	1490-29-554-B3-2-NI	1490-29-554-B5-2-NI	1.14	21.81 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-634-A3-2-NI	1490-29-634-A5-2-NI	1490-29-634-B3-2-NI	1490-29-634-B5-2-NI	1.14	24.96 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-714-A3-2-NI	1490-29-714-A5-2-NI	1490-29-714-B3-2-NI	1490-29-714-B5-2-NI	1.14	28.11 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-794-A3-2-NI	1490-29-794-A5-2-NI	1490-29-794-B3-2-NI	1490-29-794-B5-2-NI	1.14	31.26 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-874-A3-2-NI	1490-29-874-A5-2-NI	1490-29-874-B3-2-NI	1490-29-874-B5-2-NI	1.14	34.41 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-954-A3-2-NI	1490-29-954-A5-2-NI	1490-29-954-B3-2-NI	1490-29-954-B5-2-NI	1.14	37.56 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-1034-A3-2-NI	1490-29-1034-A5-2-NI	1490-29-1034-B3-2-NI	1490-29-1034-B5-2-NI	1.14	40.71 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-1194-A3-2-NI	1490-29-1194-A5-2-NI	1490-29-1194-B3-2-NI	1490-29-1194-B5-2-NI	1.14	47.01 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-29-1434-A3-2-NI	1490-29-1434-A5-2-NI	1490-29-1434-B3-2-NI	1490-29-1434-B5-2-NI	1.14	56.46 ± 0.04	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1490-37-394-A3-2-NI	1490-37-394-A5-2-NI	1490-37-394-B3-2-NI	1490-37-394-B5-2-NI	1.46	15.51 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-474-A3-2-NI	1490-37-474-A5-2-NI	1490-37-474-B3-2-NI	1490-37-474-B5-2-NI	1.46	18.66 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-554-A3-2-NI	1490-37-554-A5-2-NI	1490-37-554-B3-2-NI	1490-37-554-B5-2-NI	1.46	21.81 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-634-A3-2-NI	1490-37-634-A5-2-NI	1490-37-634-B3-2-NI	1490-37-634-B5-2-NI	1.46	24.96 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-714-A3-2-NI	1490-37-714-A5-2-NI	1490-37-714-B3-2-NI	1490-37-714-B5-2-NI	1.46	28.11 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-794-A3-2-NI	1490-37-794-A5-2-NI	1490-37-794-B3-2-NI	1490-37-794-B5-2-NI	1.46	31.26 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-874-A3-2-NI	1490-37-874-A5-2-NI	1490-37-874-B3-2-NI	1490-37-874-B5-2-NI	1.46	34.41 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-954-A3-2-NI	1490-37-954-A5-2-NI	1490-37-954-B3-2-NI	1490-37-954-B5-2-NI	1.46	37.56 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-1034-A3-2-NI	1490-37-1034-A5-2-NI	1490-37-1034-B3-2-NI	1490-37-1034-B5-2-NI	1.46	40.71 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-1194-A3-2-NI	1490-37-1194-A5-2-NI	1490-37-1194-B3-2-NI	1490-37-1194-B5-2-NI	1.46	47.01 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1490-37-1434-A3-2-NI	1490-37-1434-A5-2-NI	1490-37-1434-B3-2-NI	1490-37-1434-B5-2-NI	1.46	56.46 ± 0.04	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

h₁	l₁ ± 0.04						b	h₂	l₂ Cam roller carriage 3 rollers	5 rollers	F_R per cam roller carriage 3 rollers	5 rollers	F_A per cam roller carriage 3 rollers	5 rollers

1.14	15.51	18.66	21.81	24.96	28.11	31.26	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1.14	34.41	37.56	40.71	47.01	56.46	-	1.14	0.91	3.62	6.22	95.54 lbf (425 N)	146 lbf (650 N)	39.34 lbf (175 N)	78.68 lbf (350 N)
1.46	15.51	18.66	21.81	24.96	28.11	31.26	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)
1.46	34.41	37.56	40.71	47.01	56.46	-	1.46	1.18	3.62	6.22	180 lbf (800 N)	259 lbf (1150 N)	44.96 lbf (200 N)	89.92 lbf (400 N)

Build & Price

Mounting Holes, Mounting Screws

During assembly, all slotted holes provided in the guide rail and the mounting threads in the cam roller carriage must be used. This ensures that the forces resulting from the maximum load F_L / F_A are reliably transferred to the surrounding construction. Failure to use mounting screws reduces the load capacity accordingly. Other production-related holes in the guide rails are not shown.

Various screws with M5 thread can be used for mounting the cam roller carriages. In contrast, the guide rail must be mounted with the screws listed in the table. It is generally recommended to use screws of property class 8.8 in accordance with the specified tightening torque. The maximum torque for the included countersunk screws of the end stops is 4-5 Nm, which results in the highest retaining force without deforming the guide rails. The pre-assembled rubber stops are automatically clamped by the countersunk screws and thus dampen the stop of the cam roller carriages in the respective end position.

Designation - Standard
Socket countersunk head screw DIN 7991
Phillips countersunk flat head screw DIN 965
Phillips countersunk flat head self-tapping screw DIN 7997

Inner Slide
M4 / M5
M4 / M5
Size 4.5 / 5

Lubrication and Maintenance

The running surfaces of the guide rails must be lubricated with roller bearing grease before the first use. Possible lubricating greases include Cassida Grease GTX 2, Shell Gadus S2 V220 or Alvania EP 1, and Kluberplex BE 31-222. In the food or pharmaceutical sector, FDA compliant lubricating greases of class H1 or higher must be used. The grease should be distributed evenly over the entire length of the rail using a paintbrush.

After 50,000 cycles, the rails should be cleaned with a clean cloth and relubricated. If there is a risk of contamination, the maintenance intervals should be shortened. However, contamination should generally be avoided with, for example, suitable covers or optimal positioning of the cam roller linear guide rail systems.

Selected Part

Part Number

Total (net)

Mex$7,066.20

Available within 2 weeks

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	4	Mex$7,066.20
5	9	Mex$6,477.35
10	24	Mex$5,888.50
≥ 25		Mex$5,299.65

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.791 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.