GN 1420 telescopic slides are installed in pairs. The stroke reaches ≈ 100 % of the nominal length l1 (full extension). The rubber stops dampen the impact of the slide in the two end positions and take on the locking function in the retracted position. This feature is noticeable through a slight resistance on opening and closing. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by additional end stops.
The telescopic slides are delivered in pairs. They can be installed on either the left or right side due to the design. All mounting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present.
Slide profile
Steel, Zinc plated, blue passivated finishZB
Balls
Rolling bearing steel, hardened
Ball cage
Steel, zinc plated
Rubber stop
Plastic / Elastomer
Operating temperature -4 °F to +212 °F
(-20 °C to +100 °C)
RoHS
Other lengths and hole distances
Other mounting options
With latches, partially with detach function (in retracted position)
With locking device
(in retracted and / or extended position)
Other finishes
With support bracket
| E | With rubber stop, locking device in retracted position |
| 2 | Mounting with countersunk holes |
| l1 | l2 +0.16 / -0.16 Stroke | l3 | Fs per pair at 10,000 cycles | at 100,000 cycles |
|---|---|---|---|---|
| 11.81 | 12.60 | 24.41 | 211 lbf (940 N) | 153 lbf (680 N) |
| 13.78 | 14.76 | 28.54 | 216 lbf (960 N) | 173 lbf (770 N) |
| 15.75 | 17.32 | 33.07 | 218 lbf (970 N) | 164 lbf (730 N) |
| 17.72 | 19.49 | 37.20 | 247 lbf (1100 N) | 187 lbf (830 N) |
| 19.69 | 21.65 | 41.34 | 268 lbf (1190 N) | 205 lbf (910 N) |
| 21.65 | 23.62 | 45.28 | 265 lbf (1180 N) | 202 lbf (900 N) |
| 23.62 | 25.59 | 49.21 | 277 lbf (1230 N) | 218 lbf (970 N) |
| 27.56 | 29.53 | 57.09 | 290 lbf (1290 N) | 232 lbf (1030 N) |
| 31.50 | 33.39 | 64.88 | 272 lbf (1210 N) | 229 lbf (1020 N) |
| 35.43 | 37.40 | 72.83 | 236 lbf (1050 N) | 202 lbf (900 N) |
| 39.37 | 41.34 | 80.71 | 182 lbf (810 N) | 162 lbf (720 N) |
| 47.24 | 49.21 | 96.46 | 144 lbf (640 N) | 128 lbf (570 N) |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
For the listed loading forces FS to be absorbed reliably in the surrounding structure, all available countersunk holes of the outer and inner slide must be used. Failure to use mounting screws reduces the specified load capacity accordingly. The following screws can be used for mounting: |
|||||||||||
|
Designation - Standard |
Outer slide Size 5 |
Inner slide Size 4 / 4.5 |
|||||||||
|
The maximum load capacity of telescopic slides depends on the slide cross-section and the nominal length l1 as well as the resulting stroke l2. Furthermore, the extension width, the slide materials used and the components of the equipment options, such as the dampened self-retracting mechanism, have a corresponding influence. |
|||||||||||
|
|
||||||||||
|
Wear, performance, and maximum bending were assessed after each test section. |
|||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 4 | Mex$3,136.75 |
| 5 | 9 | Mex$2,875.36 |
| 10 | 24 | Mex$2,613.96 |
| ≥ 25 | Mex$2,352.56 |
Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time: +52(81)2721-4021
