GN 103.1 Trapezoidal Lead Nuts Gunmetal, Single- or Multi-Start, with Flange

GN 103.1 Gunmetal Trapezoidal Lead Nuts, Single- or Multi-Start, with Flange Material: RG - Gunmetal

Standard Sheet GN 103.1 Print This Page Technical Information

Product description

Trapezoidal lead nuts GN 103.1 are used together with trapezoidal lead screws GN 103. They can be fastened to the component to be adjusted via the bores in the flange. The centering step d₂ is used to position the nut.

The trapezoidal lead nuts should be lubricated to minimize wear. However, if lubrication is insufficient, the bronze alloy (gunmetal) generally has emergency running properties.

Specification

GunmetalRG (Rg7)

Accessory

Trapezoidal Lead Screws GN 103

GN 103.1 Gunmetal Trapezoidal Lead Nuts, Single- or Multi-Start, with Flange sketch

Hide technical drawing

Part Options / Table

Lead direction

RH	Right-hand thread
LH	Left-hand thread

Part Number RH - Right-hand thread	Part Number LH - Left-hand thread	d₁ x P Single-start	d₁ x Ph Multi-start	P_T Pitch	Number of thread turns Ph / P_T	d₂ h9	d₃ -0.008 / -0.012	d₄	d₅	d₆	l₁	l₂	l₃


103.1-8X1.5-RH-RG	103.1-8X1.5-LH-RG	8 x 1.5	-	-	-	0.709 h9	0.709 -0.008 / -0.012	1.38	1.02	0.14	0.79	0.28	0.24
103.1-10X2-RH-RG	103.1-10X2-LH-RG	10 x 2	-	-	-	0.984 h9	0.984 -0.008 / -0.012	1.65	1.34	0.20	0.98	0.39	0.24
103.1-10X3-RH-RG	103.1-10X3-LH-RG	10 x 3	-	-	-	0.984 h9	0.984 -0.008 / -0.012	1.65	1.34	0.20	0.98	0.39	0.24
103.1-12X3-RH-RG	103.1-12X3-LH-RG	12 x 3	-	-	-	1.102 h9	1.102 -0.008 / -0.012	1.89	1.50	0.24	1.10	0.47	0.31
103.1-14X4-RH-RG	103.1-14X4-LH-RG	14 x 4	-	-	-	1.102 h9	1.102 -0.008 / -0.012	1.89	1.50	0.24	1.38	0.47	0.31
103.1-16X4-RH-RG	103.1-16X4-LH-RG	16 x 4	-	-	-	1.102 h9	1.102 -0.008 / -0.012	1.89	1.50	0.24	1.73	0.47	0.31
103.1-18X4-RH-RG	103.1-18X4-LH-RG	18 x 4	-	-	-	1.102 h9	1.102 -0.008 / -0.012	1.89	1.50	0.24	1.73	0.47	0.31
103.1-20X4-RH-RG	103.1-20X4-LH-RG	20 x 4	-	-	-	1.260 h9	1.260 -0.008 / -0.012	2.17	1.77	0.28	1.73	0.47	0.31
103.1-24X5-RH-RG	103.1-24X5-LH-RG	24 x 5	-	-	-	1.260 h9	1.260 -0.008 / -0.012	2.17	1.77	0.28	1.73	0.47	0.31
103.1-30X6-RH-RG	103.1-30X6-LH-RG	30 x 6	-	-	-	1.496 h9	1.496 -0.008 / -0.012	2.44	1.97	0.28	1.81	0.55	0.31
103.1-36X6-RH-RG	103.1-36X6-LH-RG	36 x 6	-	-	-	1.772 h9	1.772 -0.008 / -0.012	2.76	2.28	0.28	2.32	0.63	0.39
103.1-40X7-RH-RG	103.1-40X7-LH-RG	40 x 7	-	-	-	2.480 h9	2.480 -0.008 / -0.012	3.74	3.07	0.35	2.87	0.63	0.39
103.1-50X8-RH-RG	103.1-50X8-LH-RG	50 x 8	-	-	-	2.835 h9	2.835 -0.008 / -0.012	4.33	3.54	0.43	3.82	0.71	0.39
103.1-12X6-RH-RG		-	12 x 6*	P3	2	1.102 h9	1.102 -0.008 / -0.012	1.89	1.50	0.24	1.10	0.47	0.31
103.1-16X8-RH-RG		-	16 x 8*	P4	2	1.102 h9	1.102 -0.008 / -0.012	1.89	1.50	0.24	1.73	0.47	0.31
103.1-20X8-RH-RG		-	20 x 8*	P4	2	1.260 h9	1.260 -0.008 / -0.012	2.17	1.77	0.28	1.73	0.47	0.31
103.1-24X10-RH-RG		-	24 x 10*	P5	2	1.260 h9	1.260 -0.008 / -0.012	2.17	1.77	0.28	1.73	0.47	0.31
103.1-30X12-RH-RG		-	30 x 12*	P6	2	1.496 h9	1.496 -0.008 / -0.012	2.44	1.97	0.28	1.81	0.55	0.31
103.1-40X14-RH-RG		-	40 x 14*	P7	2	2.480 h9	2.480 -0.008 / -0.012	3.74	3.07	0.35	2.87	0.63	0.39

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ x P Single-start	d₁ x Ph Multi-start	P_T Pitch	Number of thread turns Ph / P_T	d₂ h9	d₃ -0.008 / -0.012	d₄	d₅	d₆	l₁	l₂	l₃

8 x 1.5	-	-	-	0.709	0.709	1.38	1.02	0.14	0.79	0.28	0.24
10 x 2	-	-	-	0.984	0.984	1.65	1.34	0.20	0.98	0.39	0.24
10 x 3	-	-	-	0.984	0.984	1.65	1.34	0.20	0.98	0.39	0.24
12 x 3	-	-	-	1.102	1.102	1.89	1.50	0.24	1.10	0.47	0.31
14 x 4	-	-	-	1.102	1.102	1.89	1.50	0.24	1.38	0.47	0.31
16 x 4	-	-	-	1.102	1.102	1.89	1.50	0.24	1.73	0.47	0.31
18 x 4	-	-	-	1.102	1.102	1.89	1.50	0.24	1.73	0.47	0.31
20 x 4	-	-	-	1.260	1.260	2.17	1.77	0.28	1.73	0.47	0.31
24 x 5	-	-	-	1.260	1.260	2.17	1.77	0.28	1.73	0.47	0.31
30 x 6	-	-	-	1.496	1.496	2.44	1.97	0.28	1.81	0.55	0.31
36 x 6	-	-	-	1.772	1.772	2.76	2.28	0.28	2.32	0.63	0.39
40 x 7	-	-	-	2.480	2.480	3.74	3.07	0.35	2.87	0.63	0.39
50 x 8	-	-	-	2.835	2.835	4.33	3.54	0.43	3.82	0.71	0.39
-	12 x 6*	P3	2	1.102	1.102	1.89	1.50	0.24	1.10	0.47	0.31
-	16 x 8*	P4	2	1.102	1.102	1.89	1.50	0.24	1.73	0.47	0.31
-	20 x 8*	P4	2	1.260	1.260	2.17	1.77	0.28	1.73	0.47	0.31
-	24 x 10*	P5	2	1.260	1.260	2.17	1.77	0.28	1.73	0.47	0.31
-	30 x 12*	P6	2	1.496	1.496	2.44	1.97	0.28	1.81	0.55	0.31
-	40 x 14*	P7	2	2.480	2.480	3.74	3.07	0.35	2.87	0.63	0.39

* For lead direction RH only

Build & Price

Selected Part

Part Number

Total (net)

Mex$59.93

Available within 2 weeks

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	9	Mex$59.93
10	24	Mex$54.94
25	49	Mex$49.95
≥ 50		Mex$44.95

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.330 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.