ELESA original design 
Plastic solid disk handwheels EN 521.5 feature rear finger grips for comfortable operation.
The cover conceals mounting hardware as well as protruding and recessed shafts. For mounting, the cover is pushed in by hand. For dismantling, the cover can be raised and taken off by applying moderate downward pressure to the rim of the cover.
Resistant to solvents, oils, grease and other chemical agents.
No mounting hole in rim for handwheel without handle. Handle shipped loose; mounting of handle is required.
Plastic, Polypropylene (PP)
Hub bushing
Stainless steel AISI 304
Molded-in
Threaded insert
Brass
Cover
Plastic, light gray, push-fit
Revolving handles
RoHS
Other modifications such as inch and special metric bores, keyways, set screw holes, etc.
Cover in other colors
| B | Without keyway |
| A | Without revolving handle |
| R | With revolving handle |
| d1 | d2 H7 Type A | Type R | d3 | d4 | d5 | d6 | d7 | b | h | l1 | l2 | l3 | r | Ø Handle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3.94 | 0.394 | 0.39 | 0.87 | 0.79 | 1.18 | 0.98 | 1.06 | 0.94 | 0.35 | 0.87 | 1.34 | 2.36 | 1.54 | 0.61 |
| 4.92 | - | 0.47 | 1.02 | 0.94 | 1.38 | 1.10 | 1.22 | 1.10 | 0.43 | 1.06 | 1.56 | 2.36 | 1.93 | 0.71 |
| 5.91 | 0.551 | 0.55 | 1.02 | 0.94 | 1.50 | 1.18 | 1.34 | 1.26 | 0.39 | 1.18 | 1.73 | 2.56 | 2.28 | 0.87 |
| 7.87 | 0.787 | 0.79 | 1.57 | 1.50 | 1.97 | 1.57 | 1.73 | 1.54 | 0.51 | 1.42 | 2.09 | 3.54 | 3.19 | 0.98 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. To order cross hole GN 110, please call our sales team: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. To order cross hole GN 110, please call our sales team: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 6 | Mex$750.75 |
| 7 | 99 | Mex$723.45 |
| 100 | 249 | Mex$682.50 |
| ≥ 250 | Mex$614.25 |
Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time: +52(81)2721-4021
