ELESA original design 
To bring the handle of solid disk handwheels EN 521.6 into the operation
position, it has to be pulled upward 90° towards the rim to a stop against a torsion spring, and then it is
pushed against spring pressure into its hold position.
By maintaining the forward thrust on the handle, the handwheel can easily be rotated.
When releasing the handle, the spring automatically returns it back to the retracted position.
Handwheel features rear finger grips.
The cover conceals clamping elements, e.g. countershaft pulleys, as well as protruding and recessed
shafts. For mounting, the cover is pushed in by hand. For dismantling, the cover can be raised and taken
off by applying moderate pressure in the rim of the cover.
Resistant to solvents, oils, grease and other chemical agents.
Plastic, Polypropylene (PP)
Hub bushing
Stainless steel AISI 304
Molded-in
Cover
Plastic, light gray, push-fit
Retractable handles
RoHS
Other modifications such as inch and special metric bores, set screw holes, etc.
| B | Without keyway |
| K | With keyway |
| R | With revolving retractable handle |
| d1 | d2 H7 | d3 | d4 | d5 | d6 | d7 | b | h | l1 | l2 | l3 | r | Ø Handle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3.94 | 0.394 | 0.87 | 0.79 | 1.18 | 0.98 | 1.06 | 0.94 | 0.35 | 0.87 | 1.34 | 1.77 | 1.54 | 0.61 |
| 4.92 | 0.472 | 1.02 | 0.94 | 1.38 | 1.10 | 1.22 | 1.10 | 0.43 | 1.06 | 1.56 | 2.36 | 1.93 | 0.71 |
| 5.91 | 0.551 | 1.02 | 0.94 | 1.50 | 1.18 | 1.34 | 1.26 | 0.39 | 1.18 | 1.73 | 2.56 | 2.28 | 0.87 |
| 7.87 | 0.787 | 1.57 | 1.50 | 1.97 | 1.57 | 1.73 | 1.54 | 0.51 | 1.42 | 2.09 | 3.54 | 3.19 | 0.98 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. To order cross hole GN 110, please call our sales team: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. To order cross hole GN 110, please call our sales team: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 6 | Mex$2,127.88 |
| 7 | 99 | Mex$2,050.51 |
| 100 | 249 | Mex$1,934.44 |
| ≥ 250 | Mex$1,741.00 |
Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time: +52(81)2721-4021
