Leveling Feet GN 19

Photo

GN 19 Stainless Steel Leveling Feet, 3-A and DGUV Certified, Hygienic Design

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Product Family Hygienic Design

Standard Parts of the “Hygienic Design” product family are labeled with the HD icon. They combine high surface quality, freedom from dead spaces, non-scooped outer surfaces, and sealed bolting areas. A sealing concept based on FEM calculations ensures reliable contact pressure after installation.

suitable for use in hygienically sensitive areas
quick and easy cleaning
no dead spaces due to functional seals
certified according to EHEDG guidelines

Show all Hygienic Design products

FDA compliant

Standard Sheet GN 19 Print This Page Operating Instruction GN 19 / GN 20 Principles for Hygienic Design Hygienic Design Information Hygienic Design - Leaflet 3-A Certificate DGUV Test Certificate Plastic Characteristics Stainless Steel Characteristics

Product description

Information

Leveling feet GN 19 comply with the 3-A sanitary standard 88-01 and the DGUV testing principles, making them suitable for use in in hygienic areas.

The elastomer pad seals the space below the foot plate against dirt. This is achieved by the weight of the machine on the plate. The sealing ring above the adjustment sleeve enables fastening without dead space. Due to the wiper and the joint sealing ring, the moving components are sealed against the environment.

The high quality finish prevents adherence of dirt and facilitates cleaning.

The values listed in the table for static load capacity refer to a purely vertical load in relation to the leveling foot. Under normal operating conditions bending loads or angular loads are not uncommon and result in a reduction of load capacity, which must be taken into consideration.

Specification

Threaded stud, adjustable sleeve
Stainless steel AISI 304
Turned

Base plate
Stainless steel sheet metal AISI 316L

Seals
Blue, FDA compliant

Sealing ring
H-NBR, hardness 70 ±5 Shore A
Wiper
TPU, hardness 95 ±5 Shore A
Joint sealing ring
H-NBR, hardness 85 ±5 Shore A

Bottom seal
Elastomer

Blue, FDA compliant
Silicone, hardness 85 ±5 Shore A
Vulcanised

RoHS

Accessory

Protective End Caps GN 20.1
Sealing Rings GN 7600 (Hygienic Design)
Wipers GN 7607

Build & Price

Part Number	d₁	d₂ Thread	l₁	d₃	l₂	l₃	A/F₁	A/F₂	Static load (see information)

19-60-M12-175-A	2.36	M 12	6.89	0.98	0.55	1.38	0.67	0.75	2023 lbf (9 kN)
19-60-M12-225-A	2.36	M 12	8.86	0.98	0.55	1.38	0.67	0.75	2023 lbf (9 kN)
19-60-M16-175-A	2.36	M 16	6.89	1.10	0.75	1.38	0.71	0.87	2023 lbf (9 kN)
19-60-M16-225-A	2.36	M 16	8.86	1.10	0.75	1.38	0.71	0.87	2023 lbf (9 kN)
19-80-M12-175-A	3.15	M 12	6.89	0.98	0.55	1.38	0.67	0.75	3372 lbf (15 kN)
19-80-M12-225-A	3.15	M 12	8.86	0.98	0.55	1.38	0.67	0.75	3372 lbf (15 kN)
19-80-M16-175-A	3.15	M 16	6.89	1.10	0.75	1.38	0.71	0.87	3372 lbf (15 kN)
19-80-M16-225-A	3.15	M 16	8.86	1.10	0.75	1.38	0.71	0.87	3372 lbf (15 kN)
19-80-M20-185-A	3.15	M 20	7.28	1.26	0.94	1.38	0.94	1.06	3372 lbf (15 kN)
19-80-M20-235-A	3.15	M 20	9.25	1.26	0.94	1.38	0.94	1.06	3372 lbf (15 kN)
19-80-M24-185-A	3.15	M 24	7.28	1.42	1.14	1.38	0.94	1.18	3372 lbf (15 kN)
19-80-M24-235-A	3.15	M 24	9.25	1.42	1.14	1.38	0.94	1.18	3372 lbf (15 kN)
19-100-M16-175-A	3.94	M 16	6.89	1.10	0.75	1.38	0.71	0.87	4946 lbf (22 kN)
19-100-M16-225-A	3.94	M 16	8.86	1.10	0.75	1.38	0.71	0.87	4946 lbf (22 kN)
19-100-M20-185-A	3.94	M 20	7.28	1.26	0.94	1.38	0.94	1.06	4946 lbf (22 kN)
19-100-M20-235-A	3.94	M 20	9.25	1.26	0.94	1.38	0.94	1.06	4946 lbf (22 kN)
19-100-M24-185-A	3.94	M 24	7.28	1.42	1.14	1.38	0.94	1.18	4946 lbf (22 kN)
19-100-M24-235-A	3.94	M 24	9.25	1.42	1.14	1.38	0.94	1.18	4946 lbf (22 kN)
19-120-M16-175-A	4.72	M 16	6.89	1.10	0.75	1.38	0.71	0.87	6744 lbf (30 kN)
19-120-M16-225-A	4.72	M 16	8.86	1.10	0.75	1.38	0.71	0.87	6744 lbf (30 kN)
19-120-M20-185-A	4.72	M 20	7.28	1.26	0.94	1.38	0.94	1.06	6744 lbf (30 kN)
19-120-M20-235-A	4.72	M 20	9.25	1.26	0.94	1.38	0.94	1.06	6744 lbf (30 kN)
19-120-M24-185-A	4.72	M 24	7.28	1.42	1.14	1.38	0.94	1.18	6744 lbf (30 kN)
19-120-M24-235-A	4.72	M 24	9.25	1.42	1.14	1.38	0.94	1.18	6744 lbf (30 kN)

d₁	d₂ Thread	l₁	d₃	l₂	l₃	A/F₁	A/F₂	Static load (see information)

2.36	M 12	6.89	8.86	0.98	0.55	1.38	0.67	0.75	2023 lbf (9 kN)
2.36	M 16	6.89	8.86	1.10	0.75	1.38	0.71	0.87	2023 lbf (9 kN)
3.15	M 12	6.89	8.86	0.98	0.55	1.38	0.67	0.75	3372 lbf (15 kN)
3.15	M 16	6.89	8.86	1.10	0.75	1.38	0.71	0.87	3372 lbf (15 kN)
3.15	M 20	7.28	9.25	1.26	0.94	1.38	0.94	1.06	3372 lbf (15 kN)
3.15	M 24	7.28	9.25	1.42	1.14	1.38	0.94	1.18	3372 lbf (15 kN)
3.94	M 16	6.89	8.86	1.10	0.75	1.38	0.71	0.87	4946 lbf (22 kN)
3.94	M 20	7.28	9.25	1.26	0.94	1.38	0.94	1.06	4946 lbf (22 kN)
3.94	M 24	7.28	9.25	1.42	1.14	1.38	0.94	1.18	4946 lbf (22 kN)
4.72	M 16	6.89	8.86	1.10	0.75	1.38	0.71	0.87	6744 lbf (30 kN)
4.72	M 20	7.28	9.25	1.26	0.94	1.38	0.94	1.06	6744 lbf (30 kN)
4.72	M 24	7.28	9.25	1.42	1.14	1.38	0.94	1.18	6744 lbf (30 kN)

3D Product Configurator

Design Principles of Hygienic Design

3-A Sanitary Standard, Inc.

Nonprofit and independent organization in the USA
Three interest groups:
Public and governmental health agencies, machine and food manufacturers
Over 70 Sanitary Standards
Testing of designs and processes, issuing of certificates

Sealing Concept

Seals

For parts that are designed in Hygienic Design, seals have the central function of protecting dead spaces, gaps and cracks from penetration of cleaning fluids or product residues.

This requires a defined pre-tension / pressure of the seals and wipers for a reliable and permanent seal when installed. Within the Hygienic Design range, seal installation spaces and seal cross sections are therefore calculated and designed using simulation software in such a way that the necessary surface pressure is achieved during installation and at the same time, the seal material is not overstressed.

A fundamental differentiation can be made between static and movable seals:

The static seals shown in the application example below (at the top towards the mounting surface (sealing ring) and at the bottom towards the installation surface (bottom seal)) are tightened during installation. It should be ensured that all surfaces in contact with the seals have a surface quality of at least
Ra 0.8 µm.

The movable seals on the adjustable sleeve (wiper) and on the ball joint (joint sealing ring) of the foot are designed in such a way that they allow an adjustment in height and angle. Also with these, the installation space together with the seal cross section ensures a gap-free, pre-tensioned seal.

Depending on the version and application, it may be necessary to replace the seals in case of damage or for preventative maintenance. For this purpose, JW Winco offers the respecitve seals separately as a standard part under Sealing Rings GN 7600 for spare part requirements.

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$3,005.40

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	9	Mex$4,117.40
10	24	Mex$3,774.28
25	49	Mex$3,431.17
≥ 50		Mex$3,088.05

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 1.052 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.