Original design
The clamping bores axes of the T-angle connector clamps EN 192.9 lie in the same plane, arranged in a T-shape. They hold typical construction tubes with full surface contact over the entire cross-section of the bore.
At the screw locations z, the socket cap screws reduce the bore cross-section for clamping. Adapter bushings EN 290 can be used to reduce the bore cross-sections to a smaller diameter.
For clamping without tools, the socket cap screws can be replaced by the adjustable levers GN 911.9 listed in the table as accessories.
The plastic used in version V is made from blue, visually detectable and FDA compliant plastic granulate as per FDA CFR.21 and EU 10/2011.
Body
Plastic
Technopolymer (Polyamide PA)
Socket cap screws DIN 912
Stainless steel AISI 304
Hex nuts DIN 985
RoHS
| 2 | With 2 stainless steel socket cap screws ISO 4762 |
| d1 Bore | d2 Bore | k1 Clamping length | k2 Clamping length | l1 | l2 | l3 | m | z Screw locations for screw size | Accessory Recommended levers GN 911.9 for z l4 | |
|---|---|---|---|---|---|---|---|---|---|---|
| B 18 | B 18 | 1.14 | 1.20 | 2.56 | 1.34 | 1.14 | 1.71 | M6-18 | 1.73 | 2.48 |
| B 30 | B 30 | 1.73 | 1.79 | 3.78 | 2.09 | 1.73 | 2.54 | M8-25 | 2.48 | 3.07 |
| Min | Max | Price |
|---|---|---|
| 1 | 6 | Mex$314.05 |
| 7 | 99 | Mex$302.63 |
| 100 | 249 | Mex$285.50 |
| ≥ 250 | Mex$256.95 |
Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time: +52(81)2721-4021
