Cam locks GN 115 cam locks lock by a turning operation limited to 90° which moves the latch arm in the locked position behind the door frame. The bevels of the latch arm ease the closing of the door.
Latch arms are available with different bend angles to cover a latch arm distance A from 4 to 50 mm.
The cam locks are delivered with 2 keys and loosely enclosed latch arm. The key can be removed in both end positions.
Types with a standard lock allow every lock to be opened with the same key. For the types with different lock, there are more than 200 different lock variants, whose keys are marked by numbers.
Cam lock housing
Zinc die-cast
Housing collar
Chrome plated finish
Latch arm / assembly hardware
Steel, zinc plated, blue passivated finish
Key
Nickel silver with plastic hand piece
Operating elements
Plastic
Technopolymer (Polyamide PA)
Black, matte finish
Protection class IP65
RoHS
Finger Grip Opening Handles GN 120.1
Protective Guide Plates GN 120.2
Sheet Metal Punches GN 123
| SC | With key (Keyed alike) |
| SU | With key (Keyed differently) |
| SCK | With wing knob (Keyed alike) |
| SUK | With wing knob (Keyed differently) |
| SCT | With T-handle (Keyed alike) |
| SUT | With T-handle (Keyed differently) |
| Latch arm distance A | d Type SC, SU | Type SCK, SUK, SCT, SUT | h Type SC, SU | Type SCK, SUK, SCT, SUT |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.16 | 0.31 | 0.51 | 0.63 | 0.79 | 0.94 | 1.10 | 1.26 | 1.42 | 1.57 | 1.77 | 1.10 | 1.26 | 0.16 | 0.24 |
| 0.24 | 0.39 | 0.55 | 0.71 | 0.87 | 1.02 | 1.18 | 1.34 | 1.50 | 1.65 | 1.97 | 1.10 | 1.26 | 0.16 | 0.24 |
|
For installation, set a hole in the door, cover or hatch as shown in the outline drawing. Once assembled, the latch is pushed through the bore diameter from the front. The hex nut can then be pushed over the latch from the back and bolted in place. The required installation bore in the door leaf, is usually generated by punching or laser machining in series production. The installation bore diameter can also be created by drilling or milling as shown in the outline drawings. For small series and steel sheets below 2 mm thickness, the Sheet Metal Punches GN 123 are the tool of choice. |
||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 99 | Mex$696.00 |
| 100 | 249 | Mex$638.00 |
| 250 | 499 | Mex$580.00 |
| ≥ 500 | Mex$522.00 |
Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time: +52(81)2721-4021
