Cam Latches GN 115

Product description

Information

Cam latches GN 115 lock by a turning operation limited to 90° which moves the latch arm in the locked position behind the door frame. The bevels of the latch arm ease the closing of the door.

Latch arms are available with different bend angles to cover a latch arm distance A from 4 to 50 mm.

Products comes supplied with a loosely enclosed latch arm.

Specification

Cam latch housing
Zinc die-cast

Housing collar
Chrome plated finish

Latch arm / assembly hardware
Steel, zinc plated, blue passivated finish

Operation elements
Plastic
Technopolymer (Polyamide PA)
Black, matte finish

Cover cap (Type RG, KG, HG)
Plastic
Technopolymer (Polyamide PA)
Light gray

Protection class IP65

RoHS

Accessory

Protective Guide Plates GN 120.2
Internal Cabinet Handles GN 120.3
Sheet Metal Punches GN 123

Build & Price

Part Number SG - With hand knob	Part Number SK - With wing knob	Part Number ST - With T-handle	Part Number RG - With hollow knurled knob GN 7336	Part Number KG - With wing knob	Part Number HG - With lever	Latch arm distance A	d Type SG, RG, KG, HG	Type SK, ST	h Type SG, RG, KG, HG	Type SK, ST


115-SG-4			115-RG-4	115-KG-4	115-HG-4	0.16	1.10	-	0.16	-
	115-SK-4	115-ST-4				0.16	-	1.26	-	0.24
115-SG-8			115-RG-8	115-KG-8	115-HG-8	0.31	1.10	-	0.16	-
	115-SK-8	115-ST-8				0.31	-	1.26	-	0.24
115-SG-13			115-RG-13	115-KG-13	115-HG-13	0.51	1.10	-	0.16	-
	115-SK-13	115-ST-13				0.51	-	1.26	-	0.24
115-SG-16			115-RG-16	115-KG-16	115-HG-16	0.63	1.10	-	0.16	-
	115-SK-16	115-ST-16				0.63	-	1.26	-	0.24
115-SG-20			115-RG-20	115-KG-20	115-HG-20	0.79	1.10	-	0.16	-
	115-SK-20	115-ST-20				0.79	-	1.26	-	0.24
115-SG-24			115-RG-24	115-KG-24	115-HG-24	0.94	1.10	-	0.16	-
	115-SK-24	115-ST-24				0.94	-	1.26	-	0.24
115-SG-28			115-RG-28	115-KG-28	115-HG-28	1.10	1.10	-	0.16	-
	115-SK-28	115-ST-28				1.10	-	1.26	-	0.24
115-SG-32			115-RG-32	115-KG-32	115-HG-32	1.26	1.10	-	0.16	-
	115-SK-32	115-ST-32				1.26	-	1.26	-	0.24
115-SG-36			115-RG-36	115-KG-36	115-HG-36	1.42	1.10	-	0.16	-
	115-SK-36	115-ST-36				1.42	-	1.26	-	0.24
115-SG-40			115-RG-40	115-KG-40	115-HG-40	1.57	1.10	-	0.16	-
	115-SK-40	115-ST-40				1.57	-	1.26	-	0.24
115-SG-45			115-RG-45	115-KG-45	115-HG-45	1.77	1.10	-	0.16	-
	115-SK-45	115-ST-45				1.77	-	1.26	-	0.24
115-SG-6			115-RG-6	115-KG-6	115-HG-6	0.24	1.10	-	0.16	-
	115-SK-6	115-ST-6				0.24	-	1.26	-	0.24
115-SG-10			115-RG-10	115-KG-10	115-HG-10	0.39	1.10	-	0.16	-
	115-SK-10	115-ST-10				0.39	-	1.26	-	0.24
115-SG-14			115-RG-14	115-KG-14	115-HG-14	0.55	1.10	-	0.16	-
	115-SK-14	115-ST-14				0.55	-	1.26	-	0.24
115-SG-18			115-RG-18	115-KG-18	115-HG-18	0.71	1.10	-	0.16	-
	115-SK-18	115-ST-18				0.71	-	1.26	-	0.24
115-SG-22			115-RG-22	115-KG-22	115-HG-22	0.87	1.10	-	0.16	-
	115-SK-22	115-ST-22				0.87	-	1.26	-	0.24
115-SG-26			115-RG-26	115-KG-26	115-HG-26	1.02	1.10	-	0.16	-
	115-SK-26	115-ST-26				1.02	-	1.26	-	0.24
115-SG-30			115-RG-30	115-KG-30	115-HG-30	1.18	1.10	-	0.16	-
	115-SK-30	115-ST-30				1.18	-	1.26	-	0.24
115-SG-34			115-RG-34	115-KG-34	115-HG-34	1.34	1.10	-	0.16	-
	115-SK-34	115-ST-34				1.34	-	1.26	-	0.24
115-SG-38			115-RG-38	115-KG-38	115-HG-38	1.50	1.10	-	0.16	-
	115-SK-38	115-ST-38				1.50	-	1.26	-	0.24
115-SG-42			115-RG-42	115-KG-42	115-HG-42	1.65	1.10	-	0.16	-
	115-SK-42	115-ST-42				1.65	-	1.26	-	0.24
115-SG-50			115-RG-50	115-KG-50	115-HG-50	1.97	1.10	-	0.16	-
	115-SK-50	115-ST-50				1.97	-	1.26	-	0.24

Latch arm distance A	d Type SG, RG, KG, HG	Type SK, ST	h Type SG, RG, KG, HG	Type SK, ST

0.16	0.31	0.51	0.63	0.79	0.94	1.10	1.26	1.42	1.57	1.77	1.10	1.26	0.16	0.24
0.24	0.39	0.55	0.71	0.87	1.02	1.18	1.34	1.50	1.65	1.97	1.10	1.26	0.16	0.24

3D Product Configurator

Construction and Assembly Instructions

For installation, set a hole in the door, cover or hatch as shown in the outline drawing.

Once assembled, the latch is pushed through the bore diameter from the front. The hex nut can then be pushed over the latch from the back and bolted in place.

The required installation bore in the door leaf, is usually generated by punching or laser machining in series production.

The installation bore diameter can also be created by drilling or milling as shown in the outline drawings.

For small series and steel sheets below 2 mm thickness, the Sheet Metal Punches GN 123 are the tool of choice.

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$324.00

In Stock: 4

In Stock

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	99	Mex$443.88
100	249	Mex$406.89
250	499	Mex$369.90
≥ 500		Mex$332.91

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.207 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.