Safety Cam Latches GN 115.9

Product description

Information

Safety cam latches GN 115.9 have a push-to-turn safety function. In the two end positions the spindle is locked in place by the cam latch. The latch arm can be turned 90° (a quarter of a turn) only when the hand operating element is pushed in, which releases the safety pin from the locked position. This feature protects the latch arm from moving on its own or as the result of vibrations.

The beveled edges of the latch arm create a smooth latching of the door. The 15 different off-set latch arm options allow the "Latch arm distance A" to be set between 4 mm and 32 mm.

The safety cam latches GN 115.9 comes supplied with a loosely enclosed latch arm.

Specification

Cam latch housing
Zinc die-cast

Housing collar
Powder coated
Black, textured finishSW

Latch arm / assembly hardware
Steel, zinc plated, blue passivated finish

Operating elements
Plastic, Polyamide (PA)
Black, matte finish

Cover cap
Plastic, Polyamide (PA)
Light gray, matte finish

Other parts
Steel
Zinc plated, blue passivated finish

RoHS

Accessory

Protective Guide Plates GN 120.2
Sheet Metal Punches GN 123

Part Options / Table

Part Number RG - With hollow knurled knob GN 7336	Part Number KG - With wing knob	Part Number HG - With lever	Latch arm distance A


115.9-RG-4-SW	115.9-KG-4-SW	115.9-HG-4-SW	0.16
115.9-RG-6-SW	115.9-KG-6-SW	115.9-HG-6-SW	0.24
115.9-RG-8-SW	115.9-KG-8-SW	115.9-HG-8-SW	0.31
115.9-RG-10-SW	115.9-KG-10-SW	115.9-HG-10-SW	0.39
115.9-RG-13-SW	115.9-KG-13-SW	115.9-HG-13-SW	0.51
115.9-RG-14-SW	115.9-KG-14-SW	115.9-HG-14-SW	0.55
115.9-RG-16-SW	115.9-KG-16-SW	115.9-HG-16-SW	0.63
115.9-RG-18-SW	115.9-KG-18-SW	115.9-HG-18-SW	0.71
115.9-RG-20-SW	115.9-KG-20-SW	115.9-HG-20-SW	0.79
115.9-RG-22-SW	115.9-KG-22-SW	115.9-HG-22-SW	0.87
115.9-RG-24-SW	115.9-KG-24-SW	115.9-HG-24-SW	0.94
115.9-RG-26-SW	115.9-KG-26-SW	115.9-HG-26-SW	1.02
115.9-RG-28-SW	115.9-KG-28-SW	115.9-HG-28-SW	1.10
115.9-RG-30-SW	115.9-KG-30-SW	115.9-HG-30-SW	1.18
115.9-RG-32-SW	115.9-KG-32-SW	115.9-HG-32-SW	1.26

Latch arm distance A

0.16	0.24	0.31	0.39	0.51	0.55	0.63	0.71	0.79	0.87	0.94	1.02	1.10	1.18	1.26

Latch arm distance A

0.16

0.24

0.31

0.39

0.51

0.55

0.63

0.71

0.79

0.87

0.94

1.02

1.10

1.18

1.26

Build & Price

3D Product Configurator

Construction and Assembly Instructions

For installation, set a hole in the door, cover or hatch as shown in the outline drawing.

Once assembled, the latch is pushed through the bore diameter from the front. The hex nut can then be pushed over the latch from the back and bolted in place.

The required installation bore in the door leaf, is usually generated by punching or laser machining in series production.

The installation bore diameter can also be created by drilling or milling as shown in the outline drawings.

For small series and steel sheets below 2 mm thickness, the Sheet Metal Punches GN 123 are the tool of choice.

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$582.60

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	99	Mex$798.16
100	249	Mex$731.65
250	499	Mex$665.14
≥ 500		Mex$598.62

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.275 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.