ELESA original design 
With EN 160 lift-off hinges, the two eccentric pins that form the fulcrum are offset 0.5 mm from each other. Because of this design, the position of the door can be altered or adjusted in relation to the door frame.
Body
Plastic
Technopolymer (Polyamide PA)
Pin
Plastic
Technopolymer (Polyacetal POM)
Tapped inserts
Brass, nickel plated
Threaded studs
Steel, nickel plated
RoHS
| A | 2x2 tapped inserts |
| B | 2x2 threaded studs |
| C | 2x threaded studs (at the eccentric pin) 2x tapped inserts |
| D | 2x tapped inserts (at the eccentric pin) / 2x threaded studs |
| l1 | l2 | a | b | d1 Thread | d2 | l3 | l4 | m | t |
|---|---|---|---|---|---|---|---|---|---|
| 1.10 | 2.52 | 0.08 | 0.57 | M 5 | 0.31 | 0.24 | 0.47 | 0.75 | 0.30 |
|
The hinge section is to be attached to the door frame with the octagon holder. |
The eccentric pin is to be placed in eight positions via the octagon. |
||||||||||
|
|
|
To align the door, the eccentric pin of the top and bottom hinge may be turned into the required position. |
|||||||||||
|
|
||||||||||
|
Hinge 1: Turn pin counter-clockwise Hinge 2: Turn pin clockwise |
Hinge 1: Turn pin clockwise Hinge 2: Turn pin counter-clockwise |
||||||||||
|
Door to be unhinged |
Door not to be unhinged |
||||||||||
|
|
||||||||||
|
The top hinge section may be mounted to the frame only after the bottom hinge has been hung. |
| Min | Max | Price |
|---|---|---|
| 1 | 9 | Mex$293.11 |
| 10 | 249 | Mex$282.45 |
| 250 | 499 | Mex$266.47 |
| ≥ 500 | Mex$239.82 |
Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time: +52(81)2721-4021
