Rod End Bearings GN 648.6

Photo

Type: NH - Bronze / steel, lubrication possible

GN 648.6 Stainless Steel Rod End Bearings, with Threaded Stem Type: WH - Bronze PTFE / steel, self-lubricating

GN 648.6 Stainless Steel Rod End Bearings, with Threaded Stem Type: WK - Stainless steel PTFE / stainless steel, self-lubricating

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 648.6 Print This Page Further Information on Spherical Plain Bearings as well as Load Values, Page 2 Further Information on Rod End Bearings as well as Load Values, Page 1 ISO Fundamental Tolerances Stainless Steel Characteristics

Product description

Information

Rod end bearings GN 648.6 are a mechanical articulating joint that transmit traction and thrust from linkages and lever arms and are resistant to wear, especially under high alternating loads and impact in a radial / axial direction. Rod end bearing are used on the ends of control rods, steering links and tie rods.

Specification

Housing
Stainless steel AISI 431

Forged
Polished

Pairings

Type NH (lubrication possible)
Bearing socket
Bronze CuSn8

Internal ring
Steel 100Cr6
Hardened, ground, polished,
hard chrome plated

Type WH (self-lubricating)
Bearing socket
Bronze CuSn8
With PTFE insert

Internal ring
Steel 100Cr6
Hardened, ground, polished,
hard chrome plated

Type WK (self-lubricating)
Bearing socket
Stainless steel AISI 316Ti
With PTFE insert

Internal ring
Stainless steel 420
Hardened, ground, polished

RoHS

On request

Narrow model (ISO 12240-1, series E)

Build & Price

Part Number	d₁ +0.001 Bore	d₂ Right hand thread	Left hand thread	b₁ -0.005	b₂	d₃	d₄	l₁	l₂	l₃

648.6-5-M5L-NH	0.197 +0.001	M 5L	0.315 -0.005	0.24	0.30	0.71	1.30	1.65	0.79	13°
648.6-5-M5-NH	0.197 +0.001	M 5	0.315 -0.005	0.24	0.30	0.71	1.30	1.65	0.79	13°
648.6-6-M6L-NH	0.236 +0.001	M 6L	0.354 -0.005	0.27	0.35	0.79	1.42	1.81	0.87	13°
648.6-6-M6-NH	0.236 +0.001	M 6	0.354 -0.005	0.27	0.35	0.79	1.42	1.81	0.87	13°
648.6-8-M8L-NH	0.315 +0.001	M 8L	0.472 -0.005	0.35	0.41	0.94	1.65	2.13	0.98	14°
648.6-8-M8-NH	0.315 +0.001	M 8	0.472 -0.005	0.35	0.41	0.94	1.65	2.13	0.98	14°
648.6-10-M10L-NH	0.394 +0.001	M 10L	0.551 -0.005	0.41	0.51	1.10	1.89	2.44	1.14	13°
648.6-10-M10-NH	0.394 +0.001	M 10	0.551 -0.005	0.41	0.51	1.10	1.89	2.44	1.14	13°
648.6-12-M12-NH	0.472 +0.001	M 12	0.630 -0.005	0.47	0.61	1.26	2.13	2.76	1.30	13°
648.6-12-M12L-NH	0.472 +0.001	M 12L	0.630 -0.005	0.47	0.61	1.26	2.13	2.76	1.30	13°
648.6-14-M14L-NH	0.551 +0.001	M 14L	0.748 -0.005	0.53	0.66	1.42	2.36	3.07	1.50	16°
648.6-14-M14-NH	0.551 +0.001	M 14	0.748 -0.005	0.53	0.66	1.42	2.36	3.07	1.50	16°
648.6-16-M16L-NH	0.630 +0.001	M 16L	0.827 -0.005	0.59	0.76	1.65	2.60	3.43	1.57	15°
648.6-16-M16-NH	0.630 +0.001	M 16	0.827 -0.005	0.59	0.76	1.65	2.60	3.43	1.57	15°
648.6-18-M18X1.5L-NH	0.709 +0.001	M 18 x 1.5L	0.906 -0.005	0.65	0.86	1.81	2.83	3.74	1.73	15°
648.6-18-M18X1.5-NH	0.709 +0.001	M 18 x 1.5	0.906 -0.005	0.65	0.86	1.81	2.83	3.74	1.73	15°
648.6-20-M20X1.5L-NH	0.787 +0.001	M 20 x 1.5L	0.984 -0.005	0.71	0.96	1.97	3.07	4.06	1.85	14°
648.6-20-M20X1.5-NH	0.787 +0.001	M 20 x 1.5	0.984 -0.005	0.71	0.96	1.97	3.07	4.06	1.85	14°
648.6-22-M22X1.5L-NH	0.866 +0.001	M 22 x 1.5L	1.102 -0.005	0.79	1.02	2.13	3.31	4.37	2.01	15°
648.6-22-M22X1.5-NH	0.866 +0.001	M 22 x 1.5	1.102 -0.005	0.79	1.02	2.13	3.31	4.37	2.01	15°
648.6-25-M24X2L-NH	0.984 +0.001	M 24 x 2L	1.220 -0.005	0.87	1.17	2.36	3.70	4.88	2.28	15°
648.6-25-M24X2-NH	0.984 +0.001	M 24 x 2	1.220 -0.005	0.87	1.17	2.36	3.70	4.88	2.28	15°
648.6-30-M30X2L-NH	1.181 +0.001	M 30 x 2L	1.457 -0.005	0.98	1.37	2.76	4.33	5.71	2.80	17°
648.6-30-M30X2-NH	1.181 +0.001	M 30 x 2	1.457 -0.005	0.98	1.37	2.76	4.33	5.71	2.80	17°

Part Number	d₁ +0.001 Bore	d₂ Right hand thread	Left hand thread	b₁ -0.005	b₂	d₃	d₄	l₁	l₂	l₃

648.6-5-M5L-WH	0.197 +0.001	M 5L	0.315 -0.005	0.24	0.30	0.71	1.30	1.65	0.79	13°
648.6-5-M5-WH	0.197 +0.001	M 5	0.315 -0.005	0.24	0.30	0.71	1.30	1.65	0.79	13°
648.6-6-M6L-WH	0.236 +0.001	M 6L	0.354 -0.005	0.27	0.35	0.79	1.42	1.81	0.87	13°
648.6-6-M6-WH	0.236 +0.001	M 6	0.354 -0.005	0.27	0.35	0.79	1.42	1.81	0.87	13°
648.6-8-M8L-WH	0.315 +0.001	M 8L	0.472 -0.005	0.35	0.41	0.94	1.65	2.13	0.98	14°
648.6-8-M8-WH	0.315 +0.001	M 8	0.472 -0.005	0.35	0.41	0.94	1.65	2.13	0.98	14°
648.6-10-M10L-WH	0.394 +0.001	M 10L	0.551 -0.005	0.41	0.51	1.10	1.89	2.44	1.14	13°
648.6-10-M10-WH	0.394 +0.001	M 10	0.551 -0.005	0.41	0.51	1.10	1.89	2.44	1.14	13°
648.6-12-M12-WH	0.472 +0.001	M 12	0.630 -0.005	0.47	0.61	1.26	2.13	2.76	1.30	13°
648.6-12-M12L-WH	0.472 +0.001	M 12L	0.630 -0.005	0.47	0.61	1.26	2.13	2.76	1.30	13°
648.6-14-M14L-WH	0.551 +0.001	M 14L	0.748 -0.005	0.53	0.66	1.42	2.36	3.07	1.50	16°
648.6-14-M14-WH	0.551 +0.001	M 14	0.748 -0.005	0.53	0.66	1.42	2.36	3.07	1.50	16°
648.6-16-M16L-WH	0.630 +0.001	M 16L	0.827 -0.005	0.59	0.76	1.65	2.60	3.43	1.57	15°
648.6-16-M16-WH	0.630 +0.001	M 16	0.827 -0.005	0.59	0.76	1.65	2.60	3.43	1.57	15°
648.6-18-M18X1.5L-WH	0.709 +0.001	M 18 x 1.5L	0.906 -0.005	0.65	0.86	1.81	2.83	3.74	1.73	15°
648.6-18-M18X1.5-WH	0.709 +0.001	M 18 x 1.5	0.906 -0.005	0.65	0.86	1.81	2.83	3.74	1.73	15°
648.6-20-M20X1.5L-WH	0.787 +0.001	M 20 x 1.5L	0.984 -0.005	0.71	0.96	1.97	3.07	4.06	1.85	14°
648.6-20-M20X1.5-WH	0.787 +0.001	M 20 x 1.5	0.984 -0.005	0.71	0.96	1.97	3.07	4.06	1.85	14°
648.6-22-M22X1.5L-WH	0.866 +0.001	M 22 x 1.5L	1.102 -0.005	0.79	1.02	2.13	3.31	4.37	2.01	15°
648.6-22-M22X1.5-WH	0.866 +0.001	M 22 x 1.5	1.102 -0.005	0.79	1.02	2.13	3.31	4.37	2.01	15°
648.6-25-M24X2L-WH	0.984 +0.001	M 24 x 2L	1.220 -0.005	0.87	1.17	2.36	3.70	4.88	2.28	15°
648.6-25-M24X2-WH	0.984 +0.001	M 24 x 2	1.220 -0.005	0.87	1.17	2.36	3.70	4.88	2.28	15°
648.6-30-M30X2L-WH	1.181 +0.001	M 30 x 2L	1.457 -0.005	0.98	1.37	2.76	4.33	5.71	2.80	17°
648.6-30-M30X2-WH	1.181 +0.001	M 30 x 2	1.457 -0.005	0.98	1.37	2.76	4.33	5.71	2.80	17°

Part Number	d₁ +0.001 Bore	d₂ Right hand thread	Left hand thread	b₁ -0.005	b₂	d₃	d₄	l₁	l₂	l₃

648.6-5-M5L-WK	0.197 +0.001	M 5L	0.315 -0.005	0.24	0.30	0.71	1.30	1.65	0.79	13°
648.6-5-M5-WK	0.197 +0.001	M 5	0.315 -0.005	0.24	0.30	0.71	1.30	1.65	0.79	13°
648.6-6-M6L-WK	0.236 +0.001	M 6L	0.354 -0.005	0.27	0.35	0.79	1.42	1.81	0.87	13°
648.6-6-M6-WK	0.236 +0.001	M 6	0.354 -0.005	0.27	0.35	0.79	1.42	1.81	0.87	13°
648.6-8-M8L-WK	0.315 +0.001	M 8L	0.472 -0.005	0.35	0.41	0.94	1.65	2.13	0.98	14°
648.6-8-M8-WK	0.315 +0.001	M 8	0.472 -0.005	0.35	0.41	0.94	1.65	2.13	0.98	14°
648.6-10-M10L-WK	0.394 +0.001	M 10L	0.551 -0.005	0.41	0.51	1.10	1.89	2.44	1.14	13°
648.6-10-M10-WK	0.394 +0.001	M 10	0.551 -0.005	0.41	0.51	1.10	1.89	2.44	1.14	13°
648.6-12-M12-WK	0.472 +0.001	M 12	0.630 -0.005	0.47	0.61	1.26	2.13	2.76	1.30	13°
648.6-12-M12L-WK	0.472 +0.001	M 12L	0.630 -0.005	0.47	0.61	1.26	2.13	2.76	1.30	13°
648.6-14-M14L-WK	0.551 +0.001	M 14L	0.748 -0.005	0.53	0.66	1.42	2.36	3.07	1.50	16°
648.6-14-M14-WK	0.551 +0.001	M 14	0.748 -0.005	0.53	0.66	1.42	2.36	3.07	1.50	16°
648.6-16-M16L-WK	0.630 +0.001	M 16L	0.827 -0.005	0.59	0.76	1.65	2.60	3.43	1.57	15°
648.6-16-M16-WK	0.630 +0.001	M 16	0.827 -0.005	0.59	0.76	1.65	2.60	3.43	1.57	15°
648.6-18-M18X1.5L-WK	0.709 +0.001	M 18 x 1.5L	0.906 -0.005	0.65	0.86	1.81	2.83	3.74	1.73	15°
648.6-18-M18X1.5-WK	0.709 +0.001	M 18 x 1.5	0.906 -0.005	0.65	0.86	1.81	2.83	3.74	1.73	15°
648.6-20-M20X1.5L-WK	0.787 +0.001	M 20 x 1.5L	0.984 -0.005	0.71	0.96	1.97	3.07	4.06	1.85	14°
648.6-20-M20X1.5-WK	0.787 +0.001	M 20 x 1.5	0.984 -0.005	0.71	0.96	1.97	3.07	4.06	1.85	14°
648.6-22-M22X1.5L-WK	0.866 +0.001	M 22 x 1.5L	1.102 -0.005	0.79	1.02	2.13	3.31	4.37	2.01	15°
648.6-22-M22X1.5-WK	0.866 +0.001	M 22 x 1.5	1.102 -0.005	0.79	1.02	2.13	3.31	4.37	2.01	15°
648.6-25-M24X2L-WK	0.984 +0.001	M 24 x 2L	1.220 -0.005	0.87	1.17	2.36	3.70	4.88	2.28	15°
648.6-25-M24X2-WK	0.984 +0.001	M 24 x 2	1.220 -0.005	0.87	1.17	2.36	3.70	4.88	2.28	15°
648.6-30-M30X2L-WK	1.181 +0.001	M 30 x 2L	1.457 -0.005	0.98	1.37	2.76	4.33	5.71	2.80	17°
648.6-30-M30X2-WK	1.181 +0.001	M 30 x 2	1.457 -0.005	0.98	1.37	2.76	4.33	5.71	2.80	17°

d₁ +0.001 Bore	d₂ Right hand thread	Left hand thread	b₁ -0.005	b₂	d₃	d₄	l₁	l₂	l₃	w Max. tilting angle

0.197*	M 5	M 5L	0.315	0.24	0.30	0.71	1.30	1.65	0.79	13°
0.236	M 6	M 6L	0.354	0.27	0.35	0.79	1.42	1.81	0.87	13°
0.315	M 8	M 8L	0.472	0.35	0.41	0.94	1.65	2.13	0.98	14°
0.394	M 10	M 10L	0.551	0.41	0.51	1.10	1.89	2.44	1.14	13°
0.472	M 12	M 12L	0.630	0.47	0.61	1.26	2.13	2.76	1.30	13°
0.551	M 14	M 14L	0.748	0.53	0.66	1.42	2.36	3.07	1.50	16°
0.630	M 16	M 16L	0.827	0.59	0.76	1.65	2.60	3.43	1.57	15°
0.709	M 18 x 1.5	M 18 x 1.5L	0.906	0.65	0.86	1.81	2.83	3.74	1.73	15°
0.787	M 20 x 1.5	M 20 x 1.5L	0.984	0.71	0.96	1.97	3.07	4.06	1.85	14°
0.866**	M 22 x 1.5	M 22 x 1.5L	1.102	0.79	1.02	2.13	3.31	4.37	2.01	15°
0.984	M 24 x 2	M 24 x 2L	1.220	0.87	1.17	2.36	3.70	4.88	2.28	15°
1.181	M 30 x 2	M 30 x 2L	1.457	0.98	1.37	2.76	4.33	5.71	2.80	17°

3D Product Configurator

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$953.40

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	49	Mex$1,306.16
50	99	Mex$1,197.31
100	249	Mex$1,088.47
≥ 250		Mex$979.62

Prop 65: -

Please contact our Sales Department for more information.

RoHS: -

No details on RoHS compatibility are available at this time. Please contact our Sales Department for more information.

Weight: 0.022 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.

CAD Download

Other Data Formats

About CAD Downloads

Save as Favorites

GN 648.6 Rod End Bearings Stainless Steel, with Threaded Stem

Photo

Product Family Stainless Steel

Product description

Information

Specification

On request

Technical drawing

Part Options / Table

Type (Pairings)

Type (Pairings): NH - Bronze / steel, lubrication possible

Type (Pairings): WH - Bronze PTFE / steel, self-lubricating

Type (Pairings): WK - Stainless steel PTFE / stainless steel, self-lubricating

Metric

Build & Price

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

NH	Bronze / steel, lubrication possible
WH	Bronze PTFE / steel, self-lubricating
WK	Stainless steel PTFE / stainless steel, self-lubricating