Clevis Fork Joints GN 751

Product description

Information

Clevis fork joints GN 751 are mainly used with pneumatic or hydraulic cylinders.

They consist of a clevis fork head according to DIN 71752 and a pin with circlip (type KL or SL) or a pin with snap-on securing collar (type B).

Type KL is a “single” shaft safety retaining clip; only one side secures the pin in place (and therefore if bumped in the wrong way, may slip out of place).

Type SL is a “double” shaft safety retaining clip; both sides are raised to secure the pin from both directions. To remove this shaft safety retaining clip you must pull up on the spring sheet metal.

Specification

Fork body / pin
Steel

Property class 5
Zinc plated, blue passivated finish

Snap-on securing collar (Type B)
Steel, zinc plated, blue passivated finish

Circlips (Type KL / SL)
Spring steel

Hardened and tempered
Zinc plated, blue passivated finish

RoHS

On request

Clevis fork heads in accordance with DIN 71752 with d₁ = 25, 30, 35, 42 and 50 mm

Build & Price

Part Number B - Pin with snap-on securing collar	Part Number KL - Pin with KL circlip	Part Number SL - Pin with SL circlip	d₁ +0.002/-0.004 Bore	l₁ Short / Long	d₂ Right hand thread	Left hand thread	Fine thread	a	b	d₃	l₂ Short	Long	l₃ Short	Long	l₄


751-4-8-M4-B	751-4-8-M4-KL	751-4-8-M4-SL	0.157 +0.002/-0.004	0.31	M 4	-	M 8F = M 8x1 M 10F = M 10x1.25 M 12F = M 12x1.25 M 14F = M 14x1.5 M 16F = M 16x1.5	0.31	0.16	0.31	0.63	0.94	0.83	1.14	0.24
	751-4-16-M4-KL	751-4-16-M4-SL	0.157 +0.002/-0.004	0.63	M 4	-	M 8F = M 8x1 M 10F = M 10x1.25 M 12F = M 12x1.25 M 14F = M 14x1.5 M 16F = M 16x1.5	0.31	0.16	0.31	0.63	0.94	0.83	1.14	0.24
751-5-10-M5L-B	751-5-10-M5L-KL	751-5-10-M5L-SL	0.197 +0.002/-0.004	0.39	-	M 5L	M 8F = M 8x1 M 10F = M 10x1.25 M 12F = M 12x1.25 M 14F = M 14x1.5 M 16F = M 16x1.5	0.39	0.20	0.35	0.79	1.18	1.02	1.42	0.30
751-5-10-M5-B	751-5-10-M5-KL	751-5-10-M5-SL	0.197 +0.002/-0.004	0.39	M 5	-	M 8F = M 8x1 M 10F = M 10x1.25 M 12F = M 12x1.25 M 14F = M 14x1.5 M 16F = M 16x1.5	0.39	0.20	0.35	0.79	1.18	1.02	1.42	0.30
751-5-20-M5L-B	751-5-20-M5L-KL	751-5-20-M5L-SL	0.197 +0.002/-0.004	0.79	-	M 5L	M 8F = M 8x1 M 10F = M 10x1.25 M 12F = M 12x1.25 M 14F = M 14x1.5 M 16F = M 16x1.5	0.39	0.20	0.35	0.79	1.18	1.02	1.42	0.30
751-5-20-M5-B	751-5-20-M5-KL	751-5-20-M5-SL	0.197 +0.002/-0.004	0.79	M 5	-	M 8F = M 8x1 M 10F = M 10x1.25 M 12F = M 12x1.25 M 14F = M 14x1.5 M 16F = M 16x1.5	0.39	0.20	0.35	0.79	1.18	1.02	1.42	0.30
751-6-12-M6L-B	751-6-12-M6L-KL	751-6-12-M6L-SL	0.236 +0.002/-0.004	0.47	-	M 6L	M 8F = M 8x1 M 10F = M 10x1.25 M 12F = M 12x1.25 M 14F = M 14x1.5 M 16F = M 16x1.5	0.47	0.24	0.39	0.94	1.42	1.22	1.69	0.35
751-6-12-M6-B	751-6-12-M6-KL	751-6-12-M6-SL	0.236 +0.002/-0.004	0.47	M 6	-	M 8F = M 8x1 M 10F = M 10x1.25 M 12F = M 12x1.25 M 14F = M 14x1.5 M 16F = M 16x1.5	0.47	0.24	0.39	0.94	1.42	1.22	1.69	0.35
751-6-24-M6L-B	751-6-24-M6L-KL	751-6-24-M6L-SL	0.236 +0.002/-0.004	0.94	-	M 6L	M 8F = M 8x1 M 10F = M 10x1.25 M 12F = M 12x1.25 M 14F = M 14x1.5 M 16F = M 16x1.5	0.47	0.24	0.39	0.94	1.42	1.22	1.69	0.35
751-6-24-M6-B	751-6-24-M6-KL	751-6-24-M6-SL	0.236 +0.002/-0.004	0.94	M 6	-	M 8F = M 8x1 M 10F = M 10x1.25 M 12F = M 12x1.25 M 14F = M 14x1.5 M 16F = M 16x1.5	0.47	0.24	0.39	0.94	1.42	1.22	1.69	0.35
751-8-16-M8L-B	751-8-16-M8L-KL	751-8-16-M8L-SL	0.315 +0.002/-0.004	0.63	-	M 8L	M 8F = M 8x1	0.63	0.31	0.55	1.26	1.89	1.65	2.28	0.47
751-8-16-M8-B	751-8-16-M8-KL	751-8-16-M8-SL	0.315 +0.002/-0.004	0.63	M 8	-	M 8F = M 8x1	0.63	0.31	0.55	1.26	1.89	1.65	2.28	0.47
751-8-16-M8F-B	751-8-16-M8F-KL	751-8-16-M8F-SL	0.315 +0.002/-0.004	0.63	-	-	M 8F = M 8x1	0.63	0.31	0.55	1.26	1.89	1.65	2.28	0.47
751-8-32-M8L-B	751-8-32-M8L-KL	751-8-32-M8L-SL	0.315 +0.002/-0.004	1.26	-	M 8L	M 8F = M 8x1	0.63	0.31	0.55	1.26	1.89	1.65	2.28	0.47
751-8-32-M8-B	751-8-32-M8-KL	751-8-32-M8-SL	0.315 +0.002/-0.004	1.26	M 8	-	M 8F = M 8x1	0.63	0.31	0.55	1.26	1.89	1.65	2.28	0.47
751-8-32-M8F-B	751-8-32-M8F-KL	751-8-32-M8F-SL	0.315 +0.002/-0.004	1.26	-	-	M 8F = M 8x1	0.63	0.31	0.55	1.26	1.89	1.65	2.28	0.47
751-10-20-M10L-B	751-10-20-M10L-KL	751-10-20-M10L-SL	0.394 +0.002/-0.004	0.79	-	M 10L	M 10F = M 10x1.25	0.79	0.39	0.71	1.57	2.36	2.05	2.83	0.59
751-10-20-M10-B	751-10-20-M10-KL	751-10-20-M10-SL	0.394 +0.002/-0.004	0.79	M 10	-	M 10F = M 10x1.25	0.79	0.39	0.71	1.57	2.36	2.05	2.83	0.59
751-10-20-M10F-B	751-10-20-M10F-KL	751-10-20-M10F-SL	0.394 +0.002/-0.004	0.79	-	-	M 10F = M 10x1.25	0.79	0.39	0.71	1.57	2.36	2.05	2.83	0.59
751-10-40-M10L-B	751-10-40-M10L-KL	751-10-40-M10L-SL	0.394 +0.002/-0.004	1.57	-	M 10L	M 10F = M 10x1.25	0.79	0.39	0.71	1.57	2.36	2.05	2.83	0.59
751-10-40-M10-B	751-10-40-M10-KL	751-10-40-M10-SL	0.394 +0.002/-0.004	1.57	M 10	-	M 10F = M 10x1.25	0.79	0.39	0.71	1.57	2.36	2.05	2.83	0.59
751-10-40-M10F-B	751-10-40-M10F-KL	751-10-40-M10F-SL	0.394 +0.002/-0.004	1.57	-	-	M 10F = M 10x1.25	0.79	0.39	0.71	1.57	2.36	2.05	2.83	0.59
751-12-24-M12L-B	751-12-24-M12L-KL	751-12-24-M12L-SL	0.472 +0.002/-0.004	0.94	-	M 12L	M 12F = M 12x1.25	0.94	0.47	0.79	1.89	2.83	2.44	3.39	0.71
751-12-24-M12-B	751-12-24-M12-KL	751-12-24-M12-SL	0.472 +0.002/-0.004	0.94	M 12	-	M 12F = M 12x1.25	0.94	0.47	0.79	1.89	2.83	2.44	3.39	0.71
751-12-24-M12F-B	751-12-24-M12F-KL	751-12-24-M12F-SL	0.472 +0.002/-0.004	0.94	-	-	M 12F = M 12x1.25	0.94	0.47	0.79	1.89	2.83	2.44	3.39	0.71
751-12-48-M12L-B	751-12-48-M12L-KL	751-12-48-M12L-SL	0.472 +0.002/-0.004	1.89	-	M 12L	M 12F = M 12x1.25	0.94	0.47	0.79	1.89	2.83	2.44	3.39	0.71
751-12-48-M12-B	751-12-48-M12-KL	751-12-48-M12-SL	0.472 +0.002/-0.004	1.89	M 12	-	M 12F = M 12x1.25	0.94	0.47	0.79	1.89	2.83	2.44	3.39	0.71
751-12-48-M12F-B	751-12-48-M12F-KL	751-12-48-M12F-SL	0.472 +0.002/-0.004	1.89	-	-	M 12F = M 12x1.25	0.94	0.47	0.79	1.89	2.83	2.44	3.39	0.71
751-14-28-M14L-B	751-14-28-M14L-KL	751-14-28-M14L-SL	0.551 +0.002/-0.004	1.10	-	M 14L	M 14F = M 14x1.5	1.10	0.55	0.94	2.20	3.35	2.83	3.98	0.89
751-14-28-M14-B	751-14-28-M14-KL	751-14-28-M14-SL	0.551 +0.002/-0.004	1.10	M 14	-	M 14F = M 14x1.5	1.10	0.55	0.94	2.20	3.35	2.83	3.98	0.89
751-14-28-M14F-B	751-14-28-M14F-KL	751-14-28-M14F-SL	0.551 +0.002/-0.004	1.10	-	-	M 14F = M 14x1.5	1.10	0.55	0.94	2.20	3.35	2.83	3.98	0.89
751-14-56-M14L-B	751-14-56-M14L-KL	751-14-56-M14L-SL	0.551 +0.002/-0.004	2.20	-	M 14L	M 14F = M 14x1.5	1.10	0.55	0.94	2.20	3.35	2.83	3.98	0.89
751-14-56-M14-B	751-14-56-M14-KL	751-14-56-M14-SL	0.551 +0.002/-0.004	2.20	M 14	-	M 14F = M 14x1.5	1.10	0.55	0.94	2.20	3.35	2.83	3.98	0.89
751-14-56-M14F-B	751-14-56-M14F-KL	751-14-56-M14F-SL	0.551 +0.002/-0.004	2.20	-	-	M 14F = M 14x1.5	1.10	0.55	0.94	2.20	3.35	2.83	3.98	0.89
751-16-32-M16L-B	751-16-32-M16L-KL	751-16-32-M16L-SL	0.630 +0.002/-0.004	1.26	-	M 16L	M 16F = M 16x1.5	1.26	0.63	1.02	2.52	3.78	3.27	4.53	0.94
751-16-32-M16-B	751-16-32-M16-KL	751-16-32-M16-SL	0.630 +0.002/-0.004	1.26	M 16	-	M 16F = M 16x1.5	1.26	0.63	1.02	2.52	3.78	3.27	4.53	0.94
751-16-32-M16F-B	751-16-32-M16F-KL	751-16-32-M16F-SL	0.630 +0.002/-0.004	1.26	-	-	M 16F = M 16x1.5	1.26	0.63	1.02	2.52	3.78	3.27	4.53	0.94
751-16-64-M16L-B	751-16-64-M16L-KL	751-16-64-M16L-SL	0.630 +0.002/-0.004	2.52	-	M 16L	M 16F = M 16x1.5	1.26	0.63	1.02	2.52	3.78	3.27	4.53	0.94
751-16-64-M16-B	751-16-64-M16-KL	751-16-64-M16-SL	0.630 +0.002/-0.004	2.52	M 16	-	M 16F = M 16x1.5	1.26	0.63	1.02	2.52	3.78	3.27	4.53	0.94
751-16-64-M16F-B	751-16-64-M16F-KL	751-16-64-M16F-SL	0.630 +0.002/-0.004	2.52	-	-	M 16F = M 16x1.5	1.26	0.63	1.02	2.52	3.78	3.27	4.53	0.94
	751-20-40-M20L-KL		0.787 +0.002/-0.004	1.57	-	M 20L	M 8F = M 8x1 M 10F = M 10x1.25 M 12F = M 12x1.25 M 14F = M 14x1.5 M 16F = M 16x1.5	1.57	0.79	1.34	3.15	-	4.13	-	1.18
	751-20-40-M20-KL		0.787 +0.002/-0.004	1.57	M 20	-	M 8F = M 8x1 M 10F = M 10x1.25 M 12F = M 12x1.25 M 14F = M 14x1.5 M 16F = M 16x1.5	1.57	0.79	1.34	3.15	-	4.13	-	1.18

d₁ +0.002/-0.004 Bore	l₁ Short / Long	d₂ Right hand thread	Left hand thread	Fine thread	a	b	d₃	l₂ Short	Long	l₃ Short	Long	l₄

0.157	0.31	0.63*	M 4	-	-	0.31	0.16	0.31	0.63	0.94	0.83	1.14	0.24
0.197	0.39	0.79	M 5	M 5L	-	0.39	0.20	0.35	0.79	1.18	1.02	1.42	0.30
0.236	0.47	0.94	M 6	M 6L	-	0.47	0.24	0.39	0.94	1.42	1.22	1.69	0.35
0.315	0.63	1.26	M 8	M 8L	M 8F = M 8x1	0.63	0.31	0.55	1.26	1.89	1.65	2.28	0.47
0.394	0.79	1.57	M 10	M 10L	M 10F = M 10x1.25	0.79	0.39	0.71	1.57	2.36	2.05	2.83	0.59
0.472	0.94	1.89	M 12	M 12L	M 12F = M 12x1.25	0.94	0.47	0.79	1.89	2.83	2.44	3.39	0.71
0.551	1.10	2.20	M 14	M 14L	M 14F = M 14x1.5	1.10	0.55	0.94	2.20	3.35	2.83	3.98	0.89
0.630	1.26	2.52	M 16	M 16L	M 16F = M 16x1.5	1.26	0.63	1.02	2.52	3.78	3.27	4.53	0.94
0.787*	1.57	-	M 20	M 20L	-	1.57	0.79	1.34	3.15	-	4.13	-	1.18

3D Product Configurator

Types of Clevis Fork Joint Pins


				The pin with snap-on securing collar is easily assembled and disassembled. It is therefore particularly suitable for applications where the joint connection has to be released frequently.
				The pin with KL circlip can be assembled and disassembled without tools.
				The pin with SL circlip requires a tool for disassembling (e.g. a screw driver). It is therefore better secured.

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$76.80

In Stock: 10

In Stock

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	49	Mex$105.22
50	99	Mex$96.45
100	249	Mex$87.68
≥ 250		Mex$78.91

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.015 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.