Universal Joints with Friction Bearing DIN 808

DIN 808 Steel Universal Joints with Friction Bearing, Single or Double Jointed Bore code: B - Without keyway
Type: DG - Double jointed, friction bearing

Bore code: B - Without keyway
Type: DG - Double jointed, friction bearing

Standard Sheet DIN 808 Print This Page Mounting Information Permissible RPM and Torques / Determining the Size ISO Fundamental Tolerances Keyways WN / DIN 6885 Cross Holes GN 110.1

Product description

Universal joints with friction bearings DIN 808 are known for their precision. They have minimal play and are long lasting.

The permissible RPM of these joints is largely dependent on the type of application, including load, duration, inclination angle and lubrication. For RPM over 1000, universal joints with needle bearing should be used.

For continuous use ample lubrication is essential. This can be achieved by fitting the joint with a grease filled GN 808.1 cover boot.

The “How to order” example refers to universal joints with equal bores d₂ or s at both ends.

Specification

Body
Steel, plain finish

Joint bearing surfaces / pins / bearing sleeves
Case-hardened

RoHS

On request

Inch size bores
Other or unequal bores

DIN 808 Steel Universal Joints with Friction Bearing, Single or Double Jointed sketch

Hide technical drawing

Part Options / Table

Bore code

B	Without keyway
K	With keyway
V*	With square

Type

EG	Single jointed, friction bearing
DG	Double jointed, friction bearing

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁	d₂ +0.001 Bore	s Square	l₁ Type EG	l₂ Type DG	l₃	l₄	t +0.04 Max. assembly length of the shaft

6MXB0	0.63	6 +0.001	-	1.34	-	0.67	-	0.31 +0.04
6KXB0	0.63	6 +0.001	-	1.34	-	0.67	-	0.31 +0.04
808-16-V6-34-EG	0.63	-	V 6	1.34	-	0.67	-	0.31 +0.04
6MXC0	0.63	6 +0.001	-	-	2.20	0.67	0.87	0.31 +0.04
6KXC0	0.63	6 +0.001	-	-	2.20	0.67	0.87	0.31 +0.04
808-16-V6-56-DG	0.63	-	V 6	-	2.20	0.67	0.87	0.31 +0.04
8MXB0	0.63	8 +0.001	-	1.57	-	0.79	-	0.43 +0.04
8KXB0	0.63	8 +0.001	-	1.57	-	0.79	-	0.43 +0.04
808-16-V8-40-EG	0.63	-	V 8	1.57	-	0.79	-	0.43 +0.04
8MXC0	0.63	8 +0.001	-	-	2.44	0.79	0.87	0.43 +0.04
8KXC0	0.63	8 +0.001	-	-	2.44	0.79	0.87	0.43 +0.04
808-16-V8-62-DG	0.63	-	V 8	-	2.44	0.79	0.87	0.43 +0.04
10MXB0	0.63	10 +0.001	-	2.05	-	1.02	-	0.55 +0.04
10KXB0	0.63	10 +0.001	-	2.05	-	1.02	-	0.55 +0.04
808-16-V8-52-EG	0.63	-	V 8	2.05	-	1.02	-	0.55 +0.04
10MXC0	0.63	10 +0.001	-	-	2.91	1.02	0.87	0.55 +0.04
10KXC0	0.63	10 +0.001	-	-	2.91	1.02	0.87	0.55 +0.04
808-16-V8-74-DG	0.63	-	V 8	-	2.91	1.02	0.87	0.55 +0.04
10MXB1	0.87	10 +0.001	-	1.89	-	0.94	-	0.47 +0.04
10KXB1	0.87	10 +0.001	-	1.89	-	0.94	-	0.47 +0.04
808-22-V10-48-EG	0.87	-	V 10	1.89	-	0.94	-	0.47 +0.04
10MXC1	0.87	10 +0.001	-	-	2.91	0.94	1.02	0.47 +0.04
10KXC1	0.87	10 +0.001	-	-	2.91	0.94	1.02	0.47 +0.04
808-22-V10-74-DG	0.87	-	V 10	-	2.91	0.94	1.02	0.47 +0.04
12MXB1	0.87	12 +0.001	-	2.44	-	1.22	-	0.71 +0.04
12KXB1	0.87	12 +0.001	-	2.44	-	1.22	-	0.71 +0.04
808-22-V10-62-EG	0.87	-	V 10	2.44	-	1.22	-	0.71 +0.04
12MXC1	0.87	12 +0.001	-	-	3.46	1.22	1.02	0.71 +0.04
12KXC1	0.87	12 +0.001	-	-	3.46	1.22	1.02	0.71 +0.04
808-22-V10-88-DG	0.87	-	V 10	-	3.46	1.22	1.02	0.71 +0.04
12MXB2	0.98	12 +0.001	-	2.20	-	1.10	-	0.51 +0.04
12KXB2	0.98	12 +0.001	-	2.20	-	1.10	-	0.51 +0.04
808-25-V12-56-EG	0.98	-	V 12	2.20	-	1.10	-	0.51 +0.04
12MXC2	0.98	12 +0.001	-	-	3.39	1.10	1.18	0.51 +0.04
12KXC2	0.98	12 +0.001	-	-	3.39	1.10	1.18	0.51 +0.04
808-25-V12-86-DG	0.98	-	V 12	-	3.39	1.10	1.18	0.51 +0.04
16MXB2	0.98	16 +0.001	-	2.91	-	1.46	-	0.83 +0.04
16KXB2	0.98	16 +0.001	-	2.91	-	1.46	-	0.83 +0.04
808-25-V12-74-EG	0.98	-	V 12	2.91	-	1.46	-	0.83 +0.04
16MXC2	0.98	16 +0.001	-	-	4.09	1.46	1.18	0.83 +0.04
16KXC2	0.98	16 +0.001	-	-	4.09	1.46	1.18	0.83 +0.04
808-25-V12-104-DG	0.98	-	V 12	-	4.09	1.46	1.18	0.83 +0.04
14MXB3	1.10	14 +0.001	-	2.36	-	1.18	-	0.51 +0.04
14KXB3	1.10	14 +0.001	-	2.36	-	1.18	-	0.51 +0.04
808-28-V14-60-EG	1.10	-	V 14	2.36	-	1.18	-	0.51 +0.04
14MXC3	1.10	14 +0.001	-	-	3.78	1.18	1.42	0.51 +0.04
14KXC3	1.10	14 +0.001	-	-	3.78	1.18	1.42	0.51 +0.04
808-28-V14-96-DG	1.10	-	V 14	-	3.78	1.18	1.42	0.51 +0.04
16MXB4	1.26	16 +0.001	-	2.68	-	1.34	-	0.63 +0.04
16KXB4	1.26	16 +0.001	-	2.68	-	1.34	-	0.63 +0.04
808-32-V16-68-EG	1.26	-	V 16	2.68	-	1.34	-	0.63 +0.04
16MXC4	1.26	16 +0.001	-	-	4.13	1.34	1.46	0.63 +0.04
16KXC4	1.26	16 +0.001	-	-	4.13	1.34	1.46	0.63 +0.04
808-32-V16-105-DG	1.26	-	V 16	-	4.13	1.34	1.46	0.63 +0.04
20MXB4	1.26	20 +0.001	-	3.39	-	1.69	-	0.94 +0.04
20KXB4	1.26	20 +0.001	-	3.39	-	1.69	-	0.94 +0.04
808-32-V16-86-EG	1.26	-	V 16	3.39	-	1.69	-	0.94 +0.04
20MXC4	1.26	20 +0.001	-	-	4.88	1.69	1.50	0.94 +0.04
20KXC4	1.26	20 +0.001	-	-	4.88	1.69	1.50	0.94 +0.04
808-32-V16-124-DG	1.26	-	V 16	-	4.88	1.69	1.50	0.94 +0.04
18MXB5	1.42	18 +0.001	-	2.91	-	1.46	-	0.67 +0.04
18KXB5	1.42	18 +0.001	-	2.91	-	1.46	-	0.67 +0.04
808-36-V18-74-EG	1.42	-	V 18	2.91	-	1.46	-	0.67 +0.04
18MXC5	1.42	18 +0.001	-	-	4.49	1.46	1.57	0.67 +0.04
18KXC5	1.42	18 +0.001	-	-	4.49	1.46	1.57	0.67 +0.04
808-36-V18-114-DG	1.42	-	V 18	-	4.49	1.46	1.57	0.67 +0.04
20MXB6	1.65	20 +0.001	-	3.23	-	1.61	-	0.71 +0.04
20KXB6	1.65	20 +0.001	-	3.23	-	1.61	-	0.71 +0.04
808-42-V20-82-EG	1.65	-	V 20	3.23	-	1.61	-	0.71 +0.04
20MXC6	1.65	20 +0.001	-	-	5.04	1.61	1.81	0.71 +0.04
20KXC6	1.65	20 +0.001	-	-	5.04	1.61	1.81	0.71 +0.04
808-42-V20-128-DG	1.65	-	V 20	-	5.04	1.61	1.81	0.71 +0.04
25MXB6	1.65	25 +0.001	-	4.25	-	2.13	-	1.22 +0.04
25KXB6	1.65	25 +0.001	-	4.25	-	2.13	-	1.22 +0.04
808-42-V20-108-EG	1.65	-	V 20	4.25	-	2.13	-	1.22 +0.04
25MXC6	1.65	25 +0.001	-	-	6.14	2.13	1.89	1.22 +0.04
25KXC6	1.65	25 +0.001	-	-	6.14	2.13	1.89	1.22 +0.04
808-42-V20-156-DG	1.65	-	V 20	-	6.14	2.13	1.89	1.22 +0.04
22MXB7	1.77	22 +0.001	-	3.74	-	1.87	-	0.87 +0.04
22KXB7	1.77	22 +0.001	-	3.74	-	1.87	-	0.87 +0.04
808-45-V22-95-EG	1.77	-	V 22	3.74	-	1.87	-	0.87 +0.04
22MXC7	1.77	22 +0.001	-	-	5.71	1.87	1.97	0.87 +0.04
22KXC7	1.77	22 +0.001	-	-	5.71	1.87	1.97	0.87 +0.04
808-45-V22-145-DG	1.77	-	V 22	-	5.71	1.87	1.97	0.87 +0.04
25MXB8	1.97	25 +0.001	-	4.25	-	2.13	-	1.02 +0.04
25KXB8	1.97	25 +0.001	-	4.25	-	2.13	-	1.02 +0.04
808-50-V25-108-EG	1.97	-	V 25	4.25	-	2.13	-	1.02 +0.04
25MXC8	1.97	25 +0.001	-	-	6.42	2.13	2.17	1.02 +0.04
25KXC8	1.97	25 +0.001	-	-	6.42	2.13	2.17	1.02 +0.04
808-50-V25-163-DG	1.97	-	V 25	-	6.42	2.13	2.17	1.02 +0.04
30MXB8	1.97	30 +0.001	-	5.20	-	2.60	-	1.50 +0.04
30KXB8	1.97	30 +0.001	-	5.20	-	2.60	-	1.50 +0.04
808-50-V25-132-EG	1.97	-	V 25	5.20	-	2.60	-	1.50 +0.04
30MXC8	1.97	30 +0.001	-	-	7.40	2.60	2.20	1.50 +0.04
30KXC8	1.97	30 +0.001	-	-	7.40	2.60	2.20	1.50 +0.04
808-50-V25-188-DG	1.97	-	V 25	-	7.40	2.60	2.20	1.50 +0.04
30MXB9	2.28	30 +0.001	-	4.80	-	2.40	-	1.14 +0.04
30KXB9	2.28	30 +0.001	-	4.80	-	2.40	-	1.14 +0.04
808-58-V30-122-EG	2.28	-	V 30	4.80	-	2.40	-	1.14 +0.04
30MXC9	2.28	30 +0.001	-	-	7.48	2.40	2.68	1.14 +0.04
30KXC9	2.28	30 +0.001	-	-	7.48	2.40	2.68	1.14 +0.04
808-58-V30-190-DG	2.28	-	V 30	-	7.48	2.40	2.68	1.14 +0.04
32MXB9	2.28	32 +0.001	-	5.12	-	2.56	-	1.30 +0.04
32KXB9	2.28	32 +0.001	-	5.12	-	2.56	-	1.30 +0.04
808-58-V30-130-EG	2.28	-	V 30	5.12	-	2.56	-	1.30 +0.04
32MXC9	2.28	32 +0.001	-	-	7.80	2.56	2.68	1.30 +0.04
32KXC9	2.28	32 +0.001	-	-	7.80	2.56	2.68	1.30 +0.04
808-58-V30-198-DG	2.28	-	V 30	-	7.80	2.56	2.68	1.30 +0.04
808-70-V35-140-EG	2.76	-	V 35	5.51	-	2.76	-	1.38 +0.04
808-70-V35-212-DG	2.76	-	V 35	-	8.35	2.76	2.83	1.38 +0.04

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁	d₂ +0.001 Bore	s Square	l₁ Type EG	l₂ Type DG	l₃	l₄	t +0.04 Max. assembly length of the shaft

0.63	6	V 6*	1.34	2.20	0.67	0.87	0.31
0.63	8	V 8*	1.57	2.44	0.79	0.87	0.43
0.63	10	V 8*	2.05	2.91	1.02	0.87	0.55
0.87	10	V 10*	1.89	2.91	0.94	1.02	0.47
0.87	12	V 10*	2.44	3.46	1.22	1.02	0.71
0.98	12	V 12*	2.20	3.39	1.10	1.18	0.51
0.98	16	V 12*	2.91	4.09	1.46	1.18	0.83
1.10	14	V 14*	2.36	3.78	1.18	1.42	0.51
1.26	16	V 16*	2.68	4.13	1.34	1.46	0.63
1.26	20	V 16*	3.39	4.88	1.69	1.50	0.94
1.42	18	V 18*	2.91	4.49	1.46	1.57	0.67
1.65	20	V 20*	3.23	5.04	1.61	1.81	0.71
1.65	25	V 20*	4.25	6.14	2.13	1.89	1.22
1.77	22	V 22*	3.74	5.71	1.87	1.97	0.87
1.97	25	V 25*	4.25	6.42	2.13	2.17	1.02
1.97	30	V 25*	5.20	7.40	2.60	2.20	1.50
2.28	30	V 30*	4.80	7.48	2.40	2.68	1.14
2.28	32	V 30*	5.12	7.80	2.56	2.68	1.30
2.76*	35	V 35	5.51	8.35	2.76	2.83	1.38

* Not available from stock, requires a minimum order quantity

Build & Price

GN 110.1 Cross Holes (Special Order)

Show / Hide columns

d₁ H7 s H11	d₁ H7 s H11	d₂ H11 K / B	d₂ H11 B	d₃	Length l K / V	Length l B

6	-	2	2	M 3	4	4
8	-	3	3	M 5	5.5	5.5
10	-	3	4	M 5	5.5	6
12	14	4	5	M 6	6.5	7
16	18	5	6	M 6	8	9
20	-	5	8	M 6	8	10
22	-	6	8	M 6	10	10
25	-	6	10	M 8	10	14
30	32	6	12	M 8	14	16
35	-	6	12	M 8	16	16

Cross holes in universal joint shafts and in universal shafts are suitable for making shaft-hub connections using a pin or a grub screw. For bores with keyway or square, they serve to secure the axial position of the universal joint and shaft. The d₂ pin hole with H11 tolerance is intended for use with spiral spring pins.
The position of the cross holes / cross threads in relation to the keyway / square or the universal joints is shown in the overview.
To order cross hole GN 110.1, please call our sales team:

USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Part Number

Total (net)

Mex$1,580.40

Available within 2 weeks

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	49	Mex$1,580.40
50	99	Mex$1,448.70
100	249	Mex$1,317.00
≥ 250		Mex$1,185.30

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.132 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.