Universal Joints with Needle Bearing DIN 808

Product description

Information

Universal joints with needle bearing DIN 808 are known for their precision. They have minimal play and are long lasting.

The permissible RPM of these joints is higher than for those with friction bearing, but is still dependent on load, duration and the inclination angle. Ideal applications allow up to 4000 RPM.

Needle bearings give the universal joints at an inclination angle from 3° to 5° a considerably higher degree of efficiency than those fitted with friction bearings. The needle bearings have permanent lubrication and thus do not require servicing.

The “How to order” example refers to universal joints with equal bores d₂ or s at both ends.

Specification

Body
Steel, plain finish

Joint bearing surfaces / pins
Case-hardened

RoHS

On request

Inch size bores
Other or unequal bores

Build & Price

Part Number B - Without keyway	Part Number K - With keyway	Part Number V - With square	d₁	d₂ +0.001 Bore	s Square V	l₁	l₂	l₃	l₄	t +0.04 Max. assembly length of the shaft

10MZA1	10KZA1		0.87	10 +0.001	-	1.89	-	0.94	-	0.47 +0.04
		808-22-V10-48-EW	0.87	-	V 10	1.89	-	0.94	-	0.47 +0.04
12MZA1	12KZA1		0.87	12 +0.001	-	2.44	-	1.22	-	0.71 +0.04
		808-22-V10-62-EW	0.87	-	V 10	2.44	-	1.22	-	0.71 +0.04
12MZA2	12KZA2		0.98	12 +0.001	-	2.20	-	1.10	-	0.51 +0.04
		808-25-V12-56-EW	0.98	-	V 12	2.20	-	1.10	-	0.51 +0.04
16MZA2	16KZA2		0.98	16 +0.001	-	2.91	-	1.46	-	0.83 +0.04
		808-25-V12-74-EW	0.98	-	V 12	2.91	-	1.46	-	0.83 +0.04
14MZA3	14KZA3		1.10	14 +0.001	-	2.36	-	1.18	-	0.51 +0.04
		808-28-V14-60-EW	1.10	-	V 14	2.36	-	1.18	-	0.51 +0.04
16MZA4	16KZA4		1.26	16 +0.001	-	2.68	-	1.34	-	0.63 +0.04
		808-32-V16-68-EW	1.26	-	V 16	2.68	-	1.34	-	0.63 +0.04
20MZA4	20KZA4		1.26	20 +0.001	-	3.39	-	1.69	-	0.94 +0.04
		808-32-V16-86-EW	1.26	-	V 16	3.39	-	1.69	-	0.94 +0.04
18MZA5	18KZA5		1.42	18 +0.001	-	2.91	-	1.46	-	0.67 +0.04
		808-36-V18-74-EW	1.42	-	V 18	2.91	-	1.46	-	0.67 +0.04
20MZA6	20KZA6		1.65	20 +0.001	-	3.23	-	1.61	-	0.71 +0.04
		808-42-V20-82-EW	1.65	-	V 20	3.23	-	1.61	-	0.71 +0.04
25MZA6	25KZA6		1.65	25 +0.001	-	4.25	-	2.13	-	1.22 +0.04
		808-42-V20-108-EW	1.65	-	V 20	4.25	-	2.13	-	1.22 +0.04
22MZA7	22KZA7		1.77	22 +0.001	-	3.74	-	1.87	-	0.87 +0.04
		808-45-V22-95-EW	1.77	-	V 22	3.74	-	1.87	-	0.87 +0.04
25MZA8	25KZA8		1.97	25 +0.001	-	4.25	-	2.13	-	1.02 +0.04
		808-50-V25-108-EW	1.97	-	V 25	4.25	-	2.13	-	1.02 +0.04
30MZA8	30KZA8		1.97	30 +0.001	-	5.20	-	2.60	-	1.50 +0.04
		808-50-V25-132-EW	1.97	-	V 25	5.20	-	2.60	-	1.50 +0.04
30MZA9	30KZA9		2.28	30 +0.001	-	4.80	-	2.40	-	1.14 +0.04
		808-58-V30-122-EW	2.28	-	V 30	4.80	-	2.40	-	1.14 +0.04
32MZA9	32KZA9		2.28	32 +0.001	-	5.12	-	2.56	-	1.30 +0.04
		808-58-V30-130-EW	2.28	-	V 30	5.12	-	2.56	-	1.30 +0.04
		808-70-V35-140-EW	2.76	-	V 35	5.51	-	2.76	-	1.38 +0.04

Part Number B - Without keyway	Part Number K - With keyway	Part Number V - With square	d₁	d₂ +0.001 Bore	s Square V	l₁	l₂	l₃	l₄	t +0.04 Max. assembly length of the shaft

10MZB1	10KZB1		0.87	10 +0.001	-	-	2.91	0.94	1.02	0.47 +0.04
		808-22-V10-74-DW	0.87	-	V 10	-	2.91	0.94	1.02	0.47 +0.04
12MZB1	12KZB1		0.87	12 +0.001	-	-	3.46	1.22	1.02	0.71 +0.04
		808-22-V10-88-DW	0.87	-	V 10	-	3.46	1.22	1.02	0.71 +0.04
12MZB2	12KZB2		0.98	12 +0.001	-	-	3.39	1.10	1.18	0.51 +0.04
		808-25-V12-86-DW	0.98	-	V 12	-	3.39	1.10	1.18	0.51 +0.04
16MZB2	16KZB2		0.98	16 +0.001	-	-	4.09	1.46	1.18	0.83 +0.04
		808-25-V12-104-DW	0.98	-	V 12	-	4.09	1.46	1.18	0.83 +0.04
14MZB3	14KZB3		1.10	14 +0.001	-	-	3.78	1.18	1.42	0.51 +0.04
		808-28-V14-96-DW	1.10	-	V 14	-	3.78	1.18	1.42	0.51 +0.04
16MZB4	16KZB4		1.26	16 +0.001	-	-	4.13	1.34	1.46	0.63 +0.04
		808-32-V16-105-DW	1.26	-	V 16	-	4.13	1.34	1.46	0.63 +0.04
20MZB4	20KZB4		1.26	20 +0.001	-	-	4.88	1.69	1.50	0.94 +0.04
		808-32-V16-124-DW	1.26	-	V 16	-	4.88	1.69	1.50	0.94 +0.04
18MZB5	18KZB5		1.42	18 +0.001	-	-	4.49	1.46	1.57	0.67 +0.04
		808-36-V18-114-DW	1.42	-	V 18	-	4.49	1.46	1.57	0.67 +0.04
20MZB6	20KZB6		1.65	20 +0.001	-	-	5.04	1.61	1.81	0.71 +0.04
		808-42-V20-128-DW	1.65	-	V 20	-	5.04	1.61	1.81	0.71 +0.04
25MZB6	25KZB6		1.65	25 +0.001	-	-	6.14	2.13	1.89	1.22 +0.04
		808-42-V20-156-DW	1.65	-	V 20	-	6.14	2.13	1.89	1.22 +0.04
22MZB7	22KZB7		1.77	22 +0.001	-	-	5.71	1.87	1.97	0.87 +0.04
		808-45-V22-145-DW	1.77	-	V 22	-	5.71	1.87	1.97	0.87 +0.04
25MZB8	25KZB8		1.97	25 +0.001	-	-	6.42	2.13	2.17	1.02 +0.04
		808-50-V25-163-DW	1.97	-	V 25	-	6.42	2.13	2.17	1.02 +0.04
30MZB8	30KZB8		1.97	30 +0.001	-	-	7.40	2.60	2.20	1.50 +0.04
		808-50-V25-188-DW	1.97	-	V 25	-	7.40	2.60	2.20	1.50 +0.04
30MZB9	30KZB9		2.28	30 +0.001	-	-	7.48	2.40	2.68	1.14 +0.04
		808-58-V30-190-DW	2.28	-	V 30	-	7.48	2.40	2.68	1.14 +0.04
32MZB9	32KZB9		2.28	32 +0.001	-	-	7.80	2.56	2.68	1.30 +0.04
		808-58-V30-198-DW	2.28	-	V 30	-	7.80	2.56	2.68	1.30 +0.04
		808-70-V35-212-DW	2.76	-	V 35	-	8.35	2.76	2.83	1.38 +0.04

d₁	d₂ +0.001 Bore	s Square V	l₁	l₂	l₃	l₄	t +0.04 Max. assembly length of the shaft

0.87	10	V 10*	1.89	2.91	0.94	1.02	0.47
0.87	12	V 10*	2.44	3.46	1.22	1.02	0.71
0.98	12	V 12*	2.20	3.39	1.10	1.18	0.51
0.98	16	V 12*	2.91	4.09	1.46	1.18	0.83
1.10	14	V 14*	2.36	3.78	1.18	1.42	0.51
1.26	16	V 16*	2.68	4.13	1.34	1.46	0.63
1.26	20	V 16*	3.39	4.88	1.69	1.50	0.94
1.42	18	V 18*	2.91	4.49	1.46	1.57	0.67
1.65	20	V 20*	3.23	5.04	1.61	1.81	0.71
1.65	25	V 20*	4.25	6.14	2.13	1.89	1.22
1.77	22	V 22*	3.74	5.71	1.87	1.97	0.87
1.97	25	V 25*	4.25	6.42	2.13	2.17	1.02
1.97	30	V 25*	5.20	7.40	2.60	2.20	1.50
2.28	30	V 30*	4.80	7.48	2.40	2.68	1.14
2.28	32	V 30*	5.12	7.80	2.56	2.68	1.30
2.76*	35	V 35	5.51	8.35	2.76	2.83	1.38

3D Product Configurator

GN 110.1 Cross Holes (Special Order)

Show / Hide columns

d₁ H7 s H11	d₁ H7 s H11	d₂ H11 K / B	d₂ H11 B	d₃	Length l K / V	Length l B

6	-	2	2	M 3	4	4
8	-	3	3	M 5	5.5	5.5
10	-	3	4	M 5	5.5	6
12	14	4	5	M 6	6.5	7
16	18	5	6	M 6	8	9
20	-	5	8	M 6	8	10
22	-	6	8	M 6	10	10
25	-	6	10	M 8	10	14
30	32	6	12	M 8	14	16
35	-	6	12	M 8	16	16

Cross holes in universal joint shafts and in universal shafts are suitable for making shaft-hub connections using a pin or a grub screw. For bores with keyway or square, they serve to secure the axial position of the universal joint and shaft. The d₂ pin hole with H11 tolerance is intended for use with spiral spring pins.
The position of the cross holes / cross threads in relation to the keyway / square or the universal joints is shown in the overview.
To order cross hole GN 110.1, please call our sales team:

USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$1,659.60

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	49	Mex$1,659.60
50	99	Mex$1,521.30
100	249	Mex$1,383.00
≥ 250		Mex$1,244.70

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.209 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.