EN 239.6 Hinges with Integrated Safety Switch Technopolymer Plastic, with Connector Cable

Maximal load

Information without safety factor

Load
direction

Examples of calculation
→ see operating instruction

F max.

472.10 lbf (2100 N)

629.47 lbf (2800 N)

292.25 lbf (1300 N)

Assembly

From the front, with contersunk screws or cylinder head screws, e.g. DIN 7991 / DIN 912
From the back, with hex head screws or nuts, e.g. DIN 933 / DIN 934

Recommended torque

5 Nm (Screws and nuts M6)

Protection class

IP67

acc. to EN 60529

Switching principle, contact opening

Slow-action contacts
force-fitted, with positive opening

acc. to IEC 60947-5-1, K

Contact material

Silver alloy Ag 999

Operating travel diagram
(scheme)

The switching points are adjustable up to 4° in direction of 0°.

→ see operating instruction

Maximum operating frequency

1200 operating cycles / hour

acc. to IEC 60947-5-1
one operating cycle includes one opening and one closing action

Mechanical life span

10⁶ operating cycles

acc. to IEC 60947-5-1
one operating cycle includes one opening and one closing action

Actuating speed

min. 2° / second, max. 90° / second

Utilization Category

acc. to IMQ

DC 13: 24 V DC / 2 A (connector plug)
AC 15: 400 V AC / 4 A (cable)
DC 13: 250 V AC / 0.3 A (cable)

acc. to EN 60947-5-1
acc. to EN 60947-5-2

acc. to UL

Plug - C 300 / Q 300: AC / DC Control signals 24 V / 2 A electrical circuit cat. 2
Cable - C 300: 240 V AC / 0.75 A / Q 300: 250 V DC / 0.27 A / therm. current 2.5 A

Contacts, termination
8-pole connector M12 or
9 wire cable with
2 m or 5 m length
Pin and cable assignment

Type of cable

UL/CSA STYLE 2587 8X AWG 22

Short-circuit current

1000 A

acc. to IQM

Rated insulation voltage

30 V AC/DC (connector plug) and 400 AC (cable)

Short-circuit protection

4 A, 500 V, Type gG

Ambient temperature

-4 °F to +176 °F (-20 °C to 80 °C)

Degree of pollution, external

3

acc. to EN 60947-5-1

Mission time (T_M)

20 years

acc. to EN ISO 13849-1

Number of cycles (B10 d)

2 000 000

acc. to EN 61820-2

Low-voltage switchgear and controlgear
CE declaration
IMQ: CA02.04800
UL: E 360222

EN 60947-1/2007
EN 60947-1-5 : 2004 + A1/2009

Safety applications

until SIL 3 / PL e

acc. to EN ISO 13849-1

Other important details and hints are given in the operating instructions for EN 239.6 hinges which are included with every hinge and which are also available as PDF downloads from “www.jwwinco.com“ under “Service“.
The hinges with integrated safety switch must be mounted and commissioned by qualified technical personnel in compliance with the details given in the operating instructions and with the national and international rules and regulations and the applicable standards. JW Winco will assume no statutory liability for missing or incorrect information and for any consequences arising therefrom.