Universal Joints with Friction Bearing DIN 808

Photo

DIN 808 Stainless Steel Universal Joints with Friction Bearing, Single or Double Jointed Material: NI - Stainless steel
Bore code: B - Without keyway
Type: DG - Double jointed, friction bearing

Material: NI - Stainless steel
Bore code: B - Without keyway
Type: DG - Double jointed, friction bearing

DIN 808 Stainless Steel Universal Joints with Friction Bearing, Single or Double Jointed Material: NI - Stainless steel
Bore code: K - With keyway
Type: DG - Double jointed, friction bearing

DIN 808 Stainless Steel Universal Joints with Friction Bearing, Single or Double Jointed Material: NI - Stainless steel
Bore code: V - With square
Type: DG - Double jointed, friction bearing

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Product description

Information

Since the moveable parts of universal joints with friction bearings DIN 808 are not surface treated, i.e. not case-hardened, the possible applications are much more limited compared to the ones made of steel. Therefore, the guidelines for the selection of universal joints with friction bearing may be applied at a limited extent only. RPM over 200 may become critical.

For stainless steel universal joints, ample lubrication is especially important. This can be achieved by fitting the joint with a grease filled GN 808.1 cover boot.

The “How to order” example refers to universal joints with equal bores d₂ or s at both ends.

Specification

Body
Stainless steelNI AISI 304

RoHS

On request

Other or unequal bores

Build & Price

Part Number B - Without keyway	Part Number K - With keyway	Part Number V - With square	d₁	d₂ +0.001 Bore	s Square	l₁ Type EG	l₂ Type DG	l₃	l₄	t +0.04 Max. assembly length of the shaft

808-16-B6-34-EG-NI	808-16-K6-34-EG-NI		0.63	6 +0.001	-	1.34	-	0.67	-	0.31 +0.04
		808-16-V6-34-EG-NI	0.63	-	V 6	1.34	-	0.67	-	0.31 +0.04
808-16-B8-40-EG-NI	808-16-K8-40-EG-NI		0.63	8 +0.001	-	1.57	-	0.79	-	0.43 +0.04
		808-16-V8-40-EG-NI	0.63	-	V 8	1.57	-	0.79	-	0.43 +0.04
808-22-B10-48-EG-NI	808-22-K10-48-EG-NI		0.87	10 +0.001	-	1.89	-	0.94	-	0.47 +0.04
		808-22-V10-48-EG-NI	0.87	-	V 10	1.89	-	0.94	-	0.47 +0.04
808-25-B12-56-EG-NI	808-25-K12-56-EG-NI		0.98	12 +0.001	-	2.20	-	1.10	-	0.51 +0.04
		808-25-V12-56-EG-NI	0.98	-	V 12	2.20	-	1.10	-	0.51 +0.04
808-32-B16-68-EG-NI	808-32-K16-68-EG-NI		1.26	16 +0.001	-	2.68	-	1.34	-	0.63 +0.04
		808-32-V16-68-EG-NI	1.26	-	V 16	2.68	-	1.34	-	0.63 +0.04
808-42-B20-82-EG-NI	808-42-K20-82-EG-NI		1.65	20 +0.001	-	3.23	-	1.61	-	0.71 +0.04
		808-42-V20-82-EG-NI	1.65	-	V 20	3.23	-	1.61	-	0.71 +0.04
808-50-B25-108-EG-NI	808-50-K25-108-EG-NI		1.97	25 +0.001	-	4.25	-	2.13	-	1.02 +0.04
		808-50-V25-108-EG-NI	1.97	-	V 25	4.25	-	2.13	-	1.02 +0.04

Part Number B - Without keyway	Part Number K - With keyway	Part Number V - With square	d₁	d₂ +0.001 Bore	s Square	l₁ Type EG	l₂ Type DG	l₃	l₄	t +0.04 Max. assembly length of the shaft

808-16-B6-56-DG-NI	808-16-K6-56-DG-NI		0.63	6 +0.001	-	-	2.20	0.67	0.87	0.31 +0.04
		808-16-V6-56-DG-NI	0.63	-	V 6	-	2.20	0.67	0.87	0.31 +0.04
808-16-B8-62-DG-NI	808-16-K8-62-DG-NI		0.63	8 +0.001	-	-	2.44	0.79	0.87	0.43 +0.04
		808-16-V8-62-DG-NI	0.63	-	V 8	-	2.44	0.79	0.87	0.43 +0.04
808-22-B10-74-DG-NI	808-22-K10-74-DG-NI		0.87	10 +0.001	-	-	2.91	0.94	1.02	0.47 +0.04
		808-22-V10-74-DG-NI	0.87	-	V 10	-	2.91	0.94	1.02	0.47 +0.04
808-25-B12-86-DG-NI	808-25-K12-86-DG-NI		0.98	12 +0.001	-	-	3.39	1.10	1.18	0.51 +0.04
		808-25-V12-86-DG-NI	0.98	-	V 12	-	3.39	1.10	1.18	0.51 +0.04
808-32-B16-105-DG-NI	808-32-K16-105-DG-NI		1.26	16 +0.001	-	-	4.13	1.34	1.46	0.63 +0.04
		808-32-V16-105-DG-NI	1.26	-	V 16	-	4.13	1.34	1.46	0.63 +0.04
808-42-B20-128-DG-NI	808-42-K20-128-DG-NI		1.65	20 +0.001	-	-	5.04	1.61	1.81	0.71 +0.04
		808-42-V20-128-DG-NI	1.65	-	V 20	-	5.04	1.61	1.81	0.71 +0.04
808-50-B25-163-DG-NI	808-50-K25-163-DG-NI		1.97	25 +0.001	-	-	6.42	2.13	2.17	1.02 +0.04
		808-50-V25-163-DG-NI	1.97	-	V 25	-	6.42	2.13	2.17	1.02 +0.04

d₁	d₂ +0.001 Bore	s Square	l₁ Type EG	l₂ Type DG	l₃	l₄	t +0.04 Max. assembly length of the shaft

0.63	6	V 6*	1.34	2.20	0.67	0.87	0.31
0.63	8	V 8*	1.57	2.44	0.79	0.87	0.43
0.87	10	V 10*	1.89	2.91	0.94	1.02	0.47
0.98	12	V 12*	2.20	3.39	1.10	1.18	0.51
1.26	16	V 16*	2.68	4.13	1.34	1.46	0.63
1.65	20	V 20*	3.23	5.04	1.61	1.81	0.71
1.97	25	V 25*	4.25	6.42	2.13	2.17	1.02

3D Product Configurator

GN 110.1 Cross Holes (Special Order)

Show / Hide columns

d₁ H7 s H11	d₁ H7 s H11	d₂ H11 K / B	d₂ H11 B	d₃	Length l K / V	Length l B

6	-	2	2	M 3	4	4
8	-	3	3	M 5	5.5	5.5
10	-	3	4	M 5	5.5	6
12	14	4	5	M 6	6.5	7
16	18	5	6	M 6	8	9
20	-	5	8	M 6	8	10
22	-	6	8	M 6	10	10
25	-	6	10	M 8	10	14
30	32	6	12	M 8	14	16
35	-	6	12	M 8	16	16

Cross holes in universal joint shafts and in universal shafts are suitable for making shaft-hub connections using a pin or a grub screw. For bores with keyway or square, they serve to secure the axial position of the universal joint and shaft. The d₂ pin hole with H11 tolerance is intended for use with spiral spring pins.
The position of the cross holes / cross threads in relation to the keyway / square or the universal joints is shown in the overview.
To order cross hole GN 110.1, please call our sales team:

USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Part Number

Total Mexican Pesos (net)

Mex$3,644.40

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	49	Mex$3,644.40
50	99	Mex$3,340.70
100	249	Mex$3,037.00
≥ 250		Mex$2,733.30

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.132 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

All Prices are in Mexican Pesos. Taxes Not Included.