Cam latches GN 1150 are designed for use in hygiene areas and meet strict hygiene requirements on the operating and latch arm side due to the special mounting nuts as well as the optimized latch arm and hex head screw. The locking mechanism is protected by multiple seals. At the same time, the high surface quality (Ra < 0.8 µm) and dead-space-free mounting prevent dirt from adhering and facilitate cleaning.
The latches create a secure closure by rotating a maximum of 90°, which positions the latch arm in the locked position behind the frame. Slanted surfaces on the latch arm ensure smooth positioning. Latch arms are available with different bend angles to cover a latch arm distance A from 22 to 44 mm.
The mounting holes in the housing must be at a right angle, free of burrs and without a chamfer. This ensures that the sealing rings will function properly.
Cam latch housing
Stainless steel AISI 316L
Latch arm
Stainless steel AISI 316
Seals
Blue, FDA compliant
Operating temperature
-40 °F to 230 °F (-40 °C to 110 °C)
Other parts
Stainless steel AISI 316L
All moving parts
Lubricated with a special, FDA compliant grease
Protection class IP 66
RoHS
| SW | With two spanner flats |
| VH | Operating and latch arm side in Hygienic Design |
| d1 | Latch arm distance A | b1 | b2 | d2 | k min. | max. | l1 +0.04 / -0.04 | l2 | l3 ≈ | s1 | s2 | A/F | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.87 | 0.94 | 1.18 | 1.42 | 0.55 | 0.28 | 0.35 | 0.06 | 0.20 | 1.18 | 0.50 | 1.56 | 0.75 | 0.43 | 0.35 |
| 1.18 | 0.87 | 1.30 | 1.73 | 0.79 | 0.39 | 0.51 | 0.06 | 0.24 | 1.77 | 0.60 | 1.85 | 1.06 | 0.51 | 0.51 |
|
For installation, set a bore diameter in the door, cover or hatch as shown in the outline drawing below. The lock housing is inserted into the installation bore from the front and secured from the back with the mounting nut. Then the latch bar is secured with the hex head screw. In series production, the required installation bore in the door leaf is usually created by punching or laser cutting. The installation bore diameter can also be created by drilling or milling as shown in the outline drawings. The sheet metal punch GN 123 is also available for small series production and sheet steel with a thickness < 2 mm. |
|||||||||||
|
Construction note for d1 = 22 |
Construction note for d1 = 30 |
||||||||||
|
Bore distance |
|||||||||||
|
|
||||||||||
|
Installation bore for punching or lasering |
|||||||||||
|
|
||||||||||
|
Installation bore for drilling or milling |
|||||||||||
|
|
||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 24 | Mex$5,324.92 |
| 25 | 49 | Mex$4,881.17 |
| 50 | 99 | Mex$4,437.43 |
| ≥ 100 | Mex$3,993.69 |
Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time: +52(81)2721-4021
