Cart

The cart is empty.

Mexico
Country
USA EN
Mexico EN  |  ES
Canada EN  |  FR
Country English English Español English Français
Show all
You are here: Product Overview  >  3.2 Mounting, Positioning, Leveling with Screws, Clamping and Supporting Elements  >  Show all

Shoulder Screws, Nuts, Bolts, Washers, Set collars

Filter Products
New Products
System of Measurement
Material
Fixing Method
Product Family
Swing Bolts / Set Screws / Shoulder Screws
New Products
System of Measurement
Material
Thread (from - to) Thread
Stud Length (from - to) Stud Length
Thrust pads
New Products
System of Measurement
Material
Thread (from - to) Thread
Stud Length (from - to) Stud Length
Foot Diameter (from - to) Foot Diameter
Nuts
New Products
System of Measurement
Material
Thread (from - to) Thread
Washers
New Products
System of Measurement
Material
Fixing Method
Internal Diameter (from - to) Internal Diameter
External Diameter (from - to) External Diameter
Positioning elements / Clamping pads
New Products
Material
Thread (from - to) Thread
Bore (from - to) Bore
External Diameter (from - to) External Diameter
Stud Length (from - to) Stud Length
Quick release couplings
Leveling sets
Material
Shaft collars
System of Measurement
Material
Internal Diameter (from - to) Internal Diameter
T-slot nuts / T-slot bolts
System of Measurement
Material
Thread (from - to) Thread
Retaining cables / Lashing straps / Carabiners
New Products
Material

Remove filters

Swing Bolts, Set Screws, Shoulder Screws

DIN 444 Metric Size, Steel Swing Bolts Material: ST - Steel
DIN 444 Metric Size, Steel Swing Bolts
DIN 444 Stainless Steel Swing Bolts Material: NI - Stainless steel
DIN 444 Stainless Steel Swing Bolts
SEB Inch Size, Steel Swing Bolts
SEB Inch Size, Steel Swing Bolts
GN 1524 Steel Swing Bolts, with Extended Thread Length Werkstoff: ST - Steel
GN 1524 Steel Swing Bolts, with Extended Thread Length
GN 1524 Stainless Steel Swing Bolts, with Extended Thread Length Material: NI - Stainless steel
GN 1524 Stainless Steel Swing Bolts, with Extended Thread Length
LB Steel Latch Bolts
LB Steel Latch Bolts
WN 913.3 Inch Size, Steel Set Screws, with Brass or Plastic Tip Tip material: KU - Plastic (Nylon 66) WN 913.3 Inch Size, Steel Set Screws, with Brass or Plastic Tip Tip material: MS - Brass
WN 913.3 Inch Size, Steel Set Screws, with Brass or Plastic Tip
GN 913.3 Metric Size, Steel Set Screws, with Brass or Plastic Tip Tip material: MS - Brass GN 913.3 Metric Size, Steel Set Screws, with Brass or Plastic Tip Tip material: KU - Plastic (Polyacetal POM)
GN 913.3 Metric Size, Steel Set Screws, with Brass or Plastic Tip
GN 913.5 Stainless Steel Set Screws, with Brass or Plastic Tip Tip material: MS - Brass GN 913.5 Stainless Steel Set Screws, with Brass or Plastic Tip Tip material: KU - Plastic (Polyacetal POM)
GN 913.5 Stainless Steel Set Screws, with Brass or Plastic Tip
GN 913.2 Steel Set Screws, with Hardened Semi-Spherical or Pointed Tip Type: A - Semi-spherical tip GN 913.2 Steel Set Screws, with Hardened Semi-Spherical or Pointed Tip Type: B - Pointed tip
GN 913.2 Steel Set Screws, with Hardened Semi-Spherical or Pointed Tip
GN 933.5 Stainless Steel Hex Head Screws, with Brass / Plastic Tip or Ball End Type: MS - Brass tip GN 933.5 Stainless Steel Hex Head Screws, with Brass / Plastic Tip or Ball End Type: KU - Plastic tip (Polyacetal POM) GN 933.5 Stainless Steel Hex Head Screws, with Brass / Plastic Tip or Ball End Type: ZK - Ball end tip
GN 933.5 Stainless Steel Hex Head Screws, with Brass / Plastic Tip or Ball End
GN 605 Steel Socket Set Screws, with Full / Flat / Serrated Ball Point End Type: A - Full ball GN 605 Steel Socket Set Screws, with Full / Flat / Serrated Ball Point End Type: B - Flat ball GN 605 Steel Socket Set Screws, with Full / Flat / Serrated Ball Point End Type: V - Flat ball, with swivel limiting stop GN 605 Steel Socket Set Screws, with Full / Flat / Serrated Ball Point End Type: VR - Flat ball, with swivel limiting stop, serrated
GN 605 Steel Socket Set Screws, with Full / Flat / Serrated Ball Point End
GN 605 Stainless Steel Socket Set Screws, with Full / Flat / Serrated Ball Point End Type: AN - Full ball GN 605 Stainless Steel Socket Set Screws, with Full / Flat / Serrated Ball Point End Type: BN - Flat ball GN 605 Stainless Steel Socket Set Screws, with Full / Flat / Serrated Ball Point End Type: VRN - Flat ball, with swivel limiting stop, serrated
GN 605 Stainless Steel Socket Set Screws, with Full / Flat / Serrated Ball Point End
GN 606 Steel Socket Head Cap Screws, with Full / Flat / Serrated Ball Point End Type: A - Full ball GN 606 Steel Socket Head Cap Screws, with Full / Flat / Serrated Ball Point End Type: V - Flat ball, with swivel limiting stop GN 606 Steel Socket Head Cap Screws, with Full / Flat / Serrated Ball Point End Type: VR - Flat ball, with swivel limiting stop, serrated
GN 606 Steel Socket Head Cap Screws, with Full / Flat / Serrated Ball Point End
GN 606 Stainless Steel Socket Head Cap Screws, with Full / Flat / Serrated Ball Point End Type: AN - Full ball GN 606 Stainless Steel Socket Head Cap Screws, with Full / Flat / Serrated Ball Point End Type: BN - Flat ball GN 606 Stainless Steel Socket Head Cap Screws, with Full / Flat / Serrated Ball Point End Type: VRN - Flat ball, with swivel limiting stop, serrated
GN 606 Stainless Steel Socket Head Cap Screws, with Full / Flat / Serrated Ball Point End
GN 732.1 Steel Cylinder Head Shoulder Bolts
GN 732.1 Steel Cylinder Head Shoulder Bolts
GN 732.1 Stainless Steel Cylinder Head Shoulder Bolts
GN 732.1 Stainless Steel Cylinder Head Shoulder Bolts
ISO 7379 Metric Size, Steel Shoulder Screws, with Collar
ISO 7379 Metric Size, Steel Shoulder Screws, with Collar
ISO 7379 Metric Size, Stainless Steel Socket Shoulder Screws, with Collar
ISO 7379 Metric Size, Stainless Steel Socket Shoulder Screws, with Collar
WN 7379 Inch Size, Steel Socket Shoulder Screws, with Collar
WN 7379 Inch Size, Steel Socket Shoulder Screws, with Collar
GN 1580 Stainless Steel Hex Head Screws, Hygienic Design Finish: PL - Polished finish (Ra < 0.8 µm)<br />Sealing ring material: H - H-NBR GN 1580 Stainless Steel Hex Head Screws, Hygienic Design Finish: MT - Matte finish (Ra < 0.8 µm)<br />Sealing ring material: E - EPDM GN 1580 Stainless Steel Hex Head Screws, Hygienic Design Finish: MT - Matte finish (Ra < 0.8 µm)<br />Sealing ring material: F - FKM GN 1580 Stainless Steel Hex Head Screws, Hygienic Design Finish: MT - Matte finish (Ra < 0.8 µm)<br />Sealing ring material: H - H-NBR GN 1580 Stainless Steel Hex Head Screws, Hygienic Design Finish: PL - Polished finish (Ra < 0.8 µm)<br />Sealing ring material: E - EPDM GN 1580 Stainless Steel Hex Head Screws, Hygienic Design Finish: PL - Polished finish (Ra < 0.8 µm)<br />Sealing ring material: F - FKM
NEW GN 1580 Stainless Steel Hex Head Screws, Hygienic Design
GN 1581 Stainless Steel Hex Head Screws, Low-Profile Head, Hygienic Design Finish: MT - Matte finish (Ra < 0.8 µm)<br />Sealing ring material: E - EPDM GN 1581 Stainless Steel Hex Head Screws, Low-Profile Head, Hygienic Design Finish: MT - Matte finish (Ra < 0.8 µm)<br />Sealing ring material: F - FKM GN 1581 Stainless Steel Hex Head Screws, Low-Profile Head, Hygienic Design Finish: MT - Matte finish (Ra < 0.8 µm)<br />Sealing ring material: H - H-NBR GN 1581 Stainless Steel Hex Head Screws, Low-Profile Head, Hygienic Design Finish: PL - Polished finish (Ra < 0.8 µm)<br />Sealing ring material: E - EPDM GN 1581 Stainless Steel Hex Head Screws, Low-Profile Head, Hygienic Design Finish: PL - Polished finish (Ra < 0.8 µm)<br />Sealing ring material: F - FKM GN 1581 Stainless Steel Hex Head Screws, Low-Profile Head, Hygienic Design Finish: PL - Polished finish (Ra < 0.8 µm)<br />Sealing ring material: H - H-NBR
NEW GN 1581 Stainless Steel Hex Head Screws, Low-Profile Head, Hygienic Design
GN 1582 Stainless Steel Hex Head Screws, with Recessed Stud for Loss Protection, Hygienic Design Finish: PL - Polished finish (Ra < 0.8 µm)<br />Sealing ring material: H - H-NBR GN 1582 Stainless Steel Hex Head Screws, with Recessed Stud for Loss Protection, Hygienic Design Finish: MT - Matte finish (Ra < 0.8 µm)<br />Sealing ring material: E - EPDM GN 1582 Stainless Steel Hex Head Screws, with Recessed Stud for Loss Protection, Hygienic Design Finish: MT - Matte finish (Ra < 0.8 µm)<br />Sealing ring material: H - H-NBR GN 1582 Stainless Steel Hex Head Screws, with Recessed Stud for Loss Protection, Hygienic Design Finish: PL - Polished finish (Ra < 0.8 µm)<br />Sealing ring material: E - EPDM
GN 1582 Stainless Steel Hex Head Screws, with Recessed Stud for Loss Protection, Hygienic Design
GN 912.2 Stainless Steel Socket Cap Screws, with Recessed Stud for Loss Protection
GN 912.2 Stainless Steel Socket Cap Screws, with Recessed Stud for Loss Protection
GN 252 Steel Threaded Plugs Type: A - Without thread coating GN 252 Steel Threaded Plugs Type: PRB - With thread coating (Polyamide all-round coating)
GN 252 Steel Threaded Plugs
GN 252.5 Stainless Steel Threaded Plugs Type: A - Without thread coating GN 252.5 Stainless Steel Threaded Plugs Type: PRB - With thread coating (Polyamide all-round coating)
GN 252.5 Stainless Steel Threaded Plugs
GN 7984.2 Stainless Steel Socket Cap Screws, with Low-Profile Head, with Recessed Stud for Loss Protection
NEW GN 7984.2 Stainless Steel Socket Cap Screws, with Low-Profile Head, with Recessed Stud for Loss Protection
GN 7045.2 Stainless Steel Pan Head Screws, with Phillips Drive, with Recessed Stud for Loss Protection
NEW GN 7045.2 Stainless Steel Pan Head Screws, with Phillips Drive, with Recessed Stud for Loss Protection
GN 912.3 Stainless Steel Socket Cap Screws, with Reduced Head Diameter, with Internal Hex
NEW GN 912.3 Stainless Steel Socket Cap Screws, with Reduced Head Diameter, with Internal Hex
GN 14580.5 Steel / Stainless Steel Socket Cap Screws, with Low-Profile Head, with Internal Hexalobular Material: NI - Stainless steel GN 14580.5 Steel / Stainless Steel Socket Cap Screws, with Low-Profile Head, with Internal Hexalobular Material: BN - Steel
NEW GN 14580.5 Steel / Stainless Steel Socket Cap Screws, with Low-Profile Head, with Internal Hexalobular
GN 7984.3 Steel Socket Cap Screws, with Low-Profile Head and Reduced Head Diameter, with Internal Hex
NEW GN 7984.3 Steel Socket Cap Screws, with Low-Profile Head and Reduced Head Diameter, with Internal Hex

Thrust Pads

DIN 6332 Blackened Steel Grub Screws, with Hardened or Unhardened Tip
DIN 6332 Blackened Steel Grub Screws, with Hardened or Unhardened Tip
DIN 6332 Zinc Plated Steel Grub Screws, with Unhardened Tip
DIN 6332 Zinc Plated Steel Grub Screws, with Unhardened Tip
DIN 6332 Stainless Steel Grub Screws, with Unhardened Tip
DIN 6332 Stainless Steel Grub Screws, with Unhardened Tip
DIN 6311 Steel Thrust Pads, for Grub Screws DIN 6332 or Tommy Screws DIN 6304 / DIN 6306
DIN 6311 Steel Thrust Pads, for Grub Screws DIN 6332 or Tommy Screws DIN 6304 / DIN 6306
GN 6311.3 Steel Thrust Pads, for Grub Screws DIN 6332 or Tommy Screws DIN 6304 / DIN 6306 Type: G - With plastic cap, gliding GN 6311.3 Steel Thrust Pads, for Grub Screws DIN 6332 or Tommy Screws DIN 6304 / DIN 6306 Type: N - Without cap GN 6311.3 Steel Thrust Pads, for Grub Screws DIN 6332 or Tommy Screws DIN 6304 / DIN 6306 Type: R - With rubber cap, non-skid
GN 6311.3 Steel Thrust Pads, for Grub Screws DIN 6332 or Tommy Screws DIN 6304 / DIN 6306
GN 6311.5 Stainless Steel Thrust Pads, for Grub Screws DIN 6332 Type: G - With plastic cap, gliding GN 6311.5 Stainless Steel Thrust Pads, for Grub Screws DIN 6332 Type: N - Without cap GN 6311.5 Stainless Steel Thrust Pads, for Grub Screws DIN 6332 Type: R - With rubber cap, non-skid
GN 6311.5 Stainless Steel Thrust Pads, for Grub Screws DIN 6332
GN 6311.1 Steel Thrust Pads, for DIN 6332 Grub Screws or DIN 6304 / DIN 6306 Tommy Screws Type: A - Smooth thrust pad surface, without plastic cap GN 6311.1 Steel Thrust Pads, for DIN 6332 Grub Screws or DIN 6304 / DIN 6306 Tommy Screws Type: K - Smooth thrust pad surface, with plastic cap GN 6311.1 Steel Thrust Pads, for DIN 6332 Grub Screws or DIN 6304 / DIN 6306 Tommy Screws Type: P - Thrust pad surface with detent, without plastic cap
GN 6311.1 Steel Thrust Pads, for DIN 6332 Grub Screws or DIN 6304 / DIN 6306 Tommy Screws
GN 6311.1 Stainless Steel Thrust Pads, for DIN 6332 Grub Screws or DIN 6304 / DIN 6306 Tommy Screws Type: A - Smooth thrust pad surface, without plastic cap<br />Material: NI - Stainless steel GN 6311.1 Stainless Steel Thrust Pads, for DIN 6332 Grub Screws or DIN 6304 / DIN 6306 Tommy Screws Type: K - Smooth thrust pad surface, with plastic cap<br />Material: NI - Stainless steel GN 6311.1 Stainless Steel Thrust Pads, for DIN 6332 Grub Screws or DIN 6304 / DIN 6306 Tommy Screws Type: P - Thrust pad surface with detent, without plastic cap<br />Material: NI - Stainless steel
GN 6311.1 Stainless Steel Thrust Pads, for DIN 6332 Grub Screws or DIN 6304 / DIN 6306 Tommy Screws
GN 632.1 Steel Grub Screws, with Ball End, for Thrust Pads
GN 632.1 Steel Grub Screws, with Ball End, for Thrust Pads
GN 632.5 Stainless Steel Grub Screws, with Ball End, for Thrust Pads
GN 632.5 Stainless Steel Grub Screws, with Ball End, for Thrust Pads
GN 631 Plastic Thrust Pads, for Standard Parts with Ball End
GN 631 Plastic Thrust Pads, for Standard Parts with Ball End
GN 631.2 NBR Thrust Pads, for Standard Parts with Ball End
NEW GN 631.2 NBR Thrust Pads, for Standard Parts with Ball End
KHTS Steel Swivel Clamp Screws, with Knurled Head Pad material: PA - Plastic KHTS Steel Swivel Clamp Screws, with Knurled Head Pad material: ST - Steel
KHTS Steel Swivel Clamp Screws, with Knurled Head
GN 631.5 Stainless Steel Thrust Pads, for Standard Parts with Ball End
GN 631.5 Stainless Steel Thrust Pads, for Standard Parts with Ball End
GN 346 Steel Toggle Pads
GN 346 Steel Toggle Pads
TS Steel Swivel Clamp Screws, with Internal Hex Pad material: ST - Steel TS Steel Swivel Clamp Screws, with Internal Hex Pad material: PA - Plastic
TS Steel Swivel Clamp Screws, with Internal Hex
GN 347 Steel Swivel Hex Nuts, with Tapped Through Socket
GN 347 Steel Swivel Hex Nuts, with Tapped Through Socket
TSPS Stainless Steel Toggle Pads Pad material: NI - Stainless steel TSPS Stainless Steel Toggle Pads Pad material: PA - Plastic
TSPS Stainless Steel Toggle Pads
TSP Steel Toggle Pads Pad material: ST - Steel TSP Steel Toggle Pads Pad material: PA - Plastic
TSP Steel Toggle Pads
STP Steel / Stainless Steel Toggle Pads, Serrated
STP Steel / Stainless Steel Toggle Pads, Serrated

Nuts

DIN 1804 Steel Slotted Spanner Nuts Type: H - Steel, hardened DIN 1804 Steel Slotted Spanner Nuts Type: W - Steel, unhardened
DIN 1804 Steel Slotted Spanner Nuts
DIN 1804 Stainless Steel Slotted Spanner Nuts
DIN 1804 Stainless Steel Slotted Spanner Nuts
DIN 70852 Steel Slotted Spanner Nuts, Flat Design
DIN 70852 Steel Slotted Spanner Nuts, Flat Design
DIN 1810 Steel Hook Spanner Wrenches, with Nose End
DIN 1810 Steel Hook Spanner Wrenches, with Nose End
KM Steel Bearing Lock Nuts, Plain Finish, Flat Design
KM Steel Bearing Lock Nuts, Plain Finish, Flat Design
MB Spring Steel Bearing Lock Washers, for KM Bearing Lock Nuts
MB Spring Steel Bearing Lock Washers, for KM Bearing Lock Nuts
GN 1804.1 Steel Slotted Spanner Lock Nuts, with Polyamide Insert
GN 1804.1 Steel Slotted Spanner Lock Nuts, with Polyamide Insert
GN 1804.2 Steel Slotted Spanner Lock Nuts, with Thread Locking Screw
GN 1804.2 Steel Slotted Spanner Lock Nuts, with Thread Locking Screw
GN 706.3 Steel Threaded Shaft Collars
GN 706.3 Steel Threaded Shaft Collars
GN 706.3 Stainless Steel Threaded Shaft Collars
GN 706.3 Stainless Steel Threaded Shaft Collars
GN 444.2 Steel Eye Nuts
GN 444.2 Steel Eye Nuts
ISO 4035 Steel Thin Hex Nuts Finish: BT - Blackened finish ISO 4035 Steel Thin Hex Nuts Finish: ZB - Zinc plated, blue passivated finish
ISO 4035 Steel Thin Hex Nuts
ISO 4035 Stainless Steel Thin Hex Nuts
ISO 4035 Stainless Steel Thin Hex Nuts
ISO 8675 Steel Thin Hex Nuts, with Metric Fine Thread Finish: BT - Blackened finish ISO 8675 Steel Thin Hex Nuts, with Metric Fine Thread Finish: ZB - Zinc plated, blue passivated finish
ISO 8675 Steel Thin Hex Nuts, with Metric Fine Thread
ISO 8675 Stainless Steel Thin Hex Nuts, with Metric Fine Thread Material: NI - AISI 304
ISO 8675 Stainless Steel Thin Hex Nuts, with Metric Fine Thread
DIN 6330 Steel Fixture Nuts, with Spherical End
DIN 6330 Steel Fixture Nuts, with Spherical End
DIN 6330 Stainless Steel Fixture Nuts, with Spherical End
DIN 6330 Stainless Steel Fixture Nuts, with Spherical End
DIN 6331 Steel Hex Nuts, with Flange
DIN 6331 Steel Hex Nuts, with Flange
NO.6334 Steel Extension Nuts
NO.6334 Steel Extension Nuts
GN 1580 Stainless Steel Nuts, Hygienic Design Finish: PL - Polished finish (Ra < 0.8 µm)<br />Sealing ring material: H - H-NBR GN 1580 Stainless Steel Nuts, Hygienic Design Finish: MT - Matte finish (Ra < 0.8 µm)<br />Sealing ring material: E - EPDM GN 1580 Stainless Steel Nuts, Hygienic Design Finish: MT - Matte finish (Ra < 0.8 µm)<br />Sealing ring material: F - FKM GN 1580 Stainless Steel Nuts, Hygienic Design Finish: MT - Matte finish (Ra < 0.8 µm)<br />Sealing ring material: H - H-NBR GN 1580 Stainless Steel Nuts, Hygienic Design Finish: PL - Polished finish (Ra < 0.8 µm)<br />Sealing ring material: E - EPDM GN 1580 Stainless Steel Nuts, Hygienic Design Finish: PL - Polished finish (Ra < 0.8 µm)<br />Sealing ring material: F - FKM
NEW GN 1580 Stainless Steel Nuts, Hygienic Design
CN Steel Check Nuts
CN Steel Check Nuts
KN Steel Knurled Nuts
KN Steel Knurled Nuts
EN 934.1 Plastic Domed Cover Caps, for Hex Nuts and Hex Head Bolts
EN 934.1 Plastic Domed Cover Caps, for Hex Nuts and Hex Head Bolts

Washers

GN 6341 Steel Washers Finish: ZB - Zinc plated, blue passivated finish<br />Type: B - With bore for countersunk screw GN 6341 Steel Washers Finish: BT - Blackened finish<br />Type: A - With cylindrical bore GN 6341 Steel Washers Finish: BT - Blackened finish<br />Type: B - With bore for countersunk screw GN 6341 Steel Washers Finish: ZB - Zinc plated, blue passivated finish<br />Type: A - With cylindrical bore
GN 6341 Steel Washers
GN 6341 Stainless Steel Washers Type: A - With cylindrical bore GN 6341 Stainless Steel Washers Type: B - With bore for countersunk screw
GN 6341 Stainless Steel Washers
GN 6343 Stainless Steel Washers / Leveling Disks
GN 6343 Stainless Steel Washers / Leveling Disks
GN 6339 Steel Heavy Duty Washers, High Type Finish: BT - Blackened finish GN 6339 Steel Heavy Duty Washers, High Type Finish: GO - GEOMET 500 coating
GN 6339 Steel Heavy Duty Washers, High Type
GN 6339 Steel Heavy Duty Washers, Low Type Finish: BT - Blackened finish GN 6339 Steel Heavy Duty Washers, Low Type Finish: GO - GEOMET 500 coating
GN 6339 Steel Heavy Duty Washers, Low Type
GN 184 Steel Countersunk Washers, Blackened Finish
GN 184 Steel Countersunk Washers, Blackened Finish
GN 184 Steel Countersunk Washers, Zinc Plated
NEW GN 184 Steel Countersunk Washers, Zinc Plated
GN 185 Stainless Steel Countersunk Washers with Plastic Disk
GN 185 Stainless Steel Countersunk Washers with Plastic Disk
GN 184.5 Stainless Steel Countersunk Washers
GN 184.5 Stainless Steel Countersunk Washers
DIN 6340 Steel Heavy Duty Washers
DIN 6340 Steel Heavy Duty Washers
GN 338 Steel Disks with Cover Cap, for use as Device Bases / Glides / Screw Covers Type: KS - With cover cap, gliding GN 338 Steel Disks with Cover Cap, for use as Device Bases / Glides / Screw Covers Type: KR - With cover cap, non-slip
GN 338 Steel Disks with Cover Cap, for use as Device Bases / Glides / Screw Covers
FWS Steel / Stainless Steel Heavy Duty Flat Washers Material: ST - Steel FWS Steel / Stainless Steel Heavy Duty Flat Washers Material: NI - Stainless steel
FWS Steel / Stainless Steel Heavy Duty Flat Washers
DIN 6319 Steel Spherical Washers, Seat or Dished Type Type: C - Spherical seat washer DIN 6319 Steel Spherical Washers, Seat or Dished Type Type: D - Dished washer with d<sub>3</sub> = d<sub>2</sub> DIN 6319 Steel Spherical Washers, Seat or Dished Type Type: G - Dished washer with d<sub>4</sub> &gt; d<sub>2</sub> (enlarged outside diameter)
DIN 6319 Steel Spherical Washers, Seat or Dished Type
DIN 6319 Stainless Steel AISI 303 Spherical Washers, Seat or Dished Type Type: C - Spherical seat washer<br />Material: NI - Stainless steel DIN 6319 Stainless Steel AISI 303 Spherical Washers, Seat or Dished Type Type: D - Dished washer with d<sub>3</sub> = d<sub>2</sub><br />Material: NI - Stainless steel DIN 6319 Stainless Steel AISI 303 Spherical Washers, Seat or Dished Type Type: G - Dished washer with d<sub>4</sub> &gt; d<sub>2</sub> (enlarged outside diameter)<br />Material: NI - Stainless steel
DIN 6319 Stainless Steel AISI 303 Spherical Washers, Seat or Dished Type
DIN 6319 Stainless Steel AISI 316 Spherical Washers, Seat or Dished Type Type: C - Spherical seat washer<br />Material: A4 - Stainless steel DIN 6319 Stainless Steel AISI 316 Spherical Washers, Seat or Dished Type Type: D - Dished washer with d<sub>3</sub> = d<sub>2</sub><br />Material: A4 - Stainless steel
DIN 6319 Stainless Steel AISI 316 Spherical Washers, Seat or Dished Type
GN 6319.1 Steel Spherical Washers, Seat and Dished Combined Type
GN 6319.1 Steel Spherical Washers, Seat and Dished Combined Type
TPSWS Steel / Stainless Steel Two-Piece Spherical Washers, Seat and Dished Type Material: ST - Steel TPSWS Steel / Stainless Steel Two-Piece Spherical Washers, Seat and Dished Type Material: NI - Stainless steel
TPSWS Steel / Stainless Steel Two-Piece Spherical Washers, Seat and Dished Type
GN 6319.1 Stainless Steel Spherical Washers, Seat and Dished Combined Type
GN 6319.1 Stainless Steel Spherical Washers, Seat and Dished Combined Type
GN 350.3 Steel Spherical Leveling Washers
GN 350.3 Steel Spherical Leveling Washers
GN 6342 Steel Washers with Axial Friction Bearing
GN 6342 Steel Washers with Axial Friction Bearing
GN 350.3 Stainless Steel Spherical Leveling Washers
GN 350.3 Stainless Steel Spherical Leveling Washers
GN 6342 Stainless Steel Washers with Axial Friction Bearing
GN 6342 Stainless Steel Washers with Axial Friction Bearing
EN 6344 Steel / Stainless Steel Washer Rings with Axial Ball Bearing, with Plastic Housing Material of the axial ball bearing: ST - Steel EN 6344 Steel / Stainless Steel Washer Rings with Axial Ball Bearing, with Plastic Housing Material of the axial ball bearing: NI - Stainless steel
EN 6344 Steel / Stainless Steel Washer Rings with Axial Ball Bearing, with Plastic Housing
GN 187.4 Steel Serrated Locking Plates Type: A - With tapped bore d<sub>3</sub> in the center, with two countersunk bores for socket cap screws GN 187.4 Steel Serrated Locking Plates Type: B - With bore d<sub>4</sub> in the center, with two countersunk bores for socket cap screws GN 187.4 Steel Serrated Locking Plates Type: C - With tapped bore d<sub>3</sub> in the center, with two tapped bores to screw on GN 187.4 Steel Serrated Locking Plates Type: D - With bore d<sub>4</sub> in the center, with two tapped bores to screw on GN 187.4 Steel Serrated Locking Plates Type: E - Without bores
GN 187.4 Steel Serrated Locking Plates
GN 187.4 Stainless Steel Serrated Locking Plates Type: A - With tapped bore d<sub>3</sub> in the center, with two countersunk bores for socket cap screws GN 187.4 Stainless Steel Serrated Locking Plates Type: B - With bore d<sub>4</sub> in the center, with two countersunk bores for socket cap screws GN 187.4 Stainless Steel Serrated Locking Plates Type: C - With tapped bore d<sub>3</sub> in the center, with two tapped bores to screw on GN 187.4 Stainless Steel Serrated Locking Plates Type: D - With bore d<sub>4</sub> in the center, with two tapped bores to screw on GN 187.4 Stainless Steel Serrated Locking Plates Type: E - Without bores
GN 187.4 Stainless Steel Serrated Locking Plates
GN 187.1 Steel Guide Housings, for GN 187.4 Serrated Locking Plates Material: ST - Steel
GN 187.1 Steel Guide Housings, for GN 187.4 Serrated Locking Plates
GN 187.1 Stainless Steel Guide Housings, for GN 187.4 Serrated Locking Plates Material: NI - Stainless steel
GN 187.1 Stainless Steel Guide Housings, for GN 187.4 Serrated Locking Plates
GN 187.2 Stainless Steel Conical Thrust Springs, for GN 187.4 / EN 189 / GN 187.5 Serrated Locking Plates
GN 187.2 Stainless Steel Conical Thrust Springs, for GN 187.4 / EN 189 / GN 187.5 Serrated Locking Plates
GN 187.6 Zinc Die-Cast / Stainless Steel Locking Joint Sets, for Serrated Locking Plates GN 187.5 Type: K - With adjustable lever GN 187.6 Zinc Die-Cast / Stainless Steel Locking Joint Sets, for Serrated Locking Plates GN 187.5 Type: E - With clamping lever GN 187.6 Zinc Die-Cast / Stainless Steel Locking Joint Sets, for Serrated Locking Plates GN 187.5 Type: S - With socket cap screw DIN 912
GN 187.6 Zinc Die-Cast / Stainless Steel Locking Joint Sets, for Serrated Locking Plates GN 187.5
GN 187.5 Stainless Steel Serrated Locking Plates, Stud / Flange / Plate Type Type: A - Plain stud (weldable) GN 187.5 Stainless Steel Serrated Locking Plates, Stud / Flange / Plate Type Type: C - Threaded stud GN 187.5 Stainless Steel Serrated Locking Plates, Stud / Flange / Plate Type Type: DH - Fastening flange, horizontal GN 187.5 Stainless Steel Serrated Locking Plates, Stud / Flange / Plate Type Type: E - Plate (weldable)
GN 187.5 Stainless Steel Serrated Locking Plates, Stud / Flange / Plate Type
EN 189 Plastic Serrated Locking Plates Type: B - With bore d<sub>3</sub> in the center, with two countersunk bores for socket cap screws EN 189 Plastic Serrated Locking Plates Type: BC - With bore d<sub>3</sub> in the center, with two countersunk bores for socket cap screws, with a guide EN 189 Plastic Serrated Locking Plates Type: D - With bore d<sub>3</sub> in the center, with two hex nuts to screw on EN 189 Plastic Serrated Locking Plates Type: DC - With bore d<sub>3</sub> in the center, with two hex nuts to screw on, with a guide
EN 189 Plastic Serrated Locking Plates
DIN 6371 Steel Swing C-Washers
DIN 6371 Steel Swing C-Washers
GN 188 Stainless Steel Serrated Locking Plates, Weldable Type: A - With through hole, without bushing GN 188 Stainless Steel Serrated Locking Plates, Weldable Type: B - With threaded bushing GN 188 Stainless Steel Serrated Locking Plates, Weldable Type: C - With threaded bushing and positioning hub
GN 188 Stainless Steel Serrated Locking Plates, Weldable
SCW Steel Swing C-Washers
SCW Steel Swing C-Washers
GN 183 Steel Knurled C-Washers
GN 183 Steel Knurled C-Washers
HDCW Steel Heavy Duty C-Washers
HDCW Steel Heavy Duty C-Washers

Positioning Elements, Clamping Pads

DIN 172 Steel Press-Fit Drill Bushings, with Flange
DIN 172 Steel Press-Fit Drill Bushings, with Flange
GN 172.1 Steel Press-Fit Guide Bushings, with Flange, with Conical Bore, for GN 817.5 Indexing Plungers
GN 172.1 Steel Press-Fit Guide Bushings, with Flange, with Conical Bore, for GN 817.5 Indexing Plungers
DIN 179 Steel Press-Fit Drill Bushings
DIN 179 Steel Press-Fit Drill Bushings
GN 179.1 Steel Press-Fit Guide Bushings, with Conical Bore, for GN 817.5 Indexing Plungers
GN 179.1 Steel Press-Fit Guide Bushings, with Conical Bore, for GN 817.5 Indexing Plungers
GN 771.1 Steel Locating Pins, Cylindrical, for DIN 172 / DIN 179 Drill Bushings
GN 771.1 Steel Locating Pins, Cylindrical, for DIN 172 / DIN 179 Drill Bushings
GN 771.2 Steel Locating Pins, Conical, for GN 172.1 / GN 179.1 Guide Bushings
GN 771.2 Steel Locating Pins, Conical, for GN 172.1 / GN 179.1 Guide Bushings
GN 230 Steel Tenon Nuts
GN 230 Steel Tenon Nuts
DIN 6325 Steel Dowel Pins
NEW DIN 6325 Steel Dowel Pins
DIN 6321 Steel Locating / Seating Pins Type: A - Seating pin, low type DIN 6321 Steel Locating / Seating Pins Type: B - Locating pin, high type, cylindrical DIN 6321 Steel Locating / Seating Pins Type: C - Locating pin, high type, flattened
DIN 6321 Steel Locating / Seating Pins
DIN 7979 Steel Dowel Pins, with Internal Thread
DIN 7979 Steel Dowel Pins, with Internal Thread
GN 6322 Steel Locating Pins, with Ball-Type Shoulder Type: B - Locating pin, high type, cylindrical GN 6322 Steel Locating Pins, with Ball-Type Shoulder Type: C - Locating pin, high type, flattened
GN 6322 Steel Locating Pins, with Ball-Type Shoulder
GN 408.1 Steel Positioning and Supporting Elements, with Threaded Stem Type: B - Smooth contact face, turned GN 408.1 Steel Positioning and Supporting Elements, with Threaded Stem Type: G - Smooth contact face, ground GN 408.1 Steel Positioning and Supporting Elements, with Threaded Stem Type: K - Spherical contact face, turned
GN 408.1 Steel Positioning and Supporting Elements, with Threaded Stem
GN 409.1 Steel Positioning Elements, with Threaded Stem Type: K - Spherical contact face GN 409.1 Steel Positioning Elements, with Threaded Stem Type: B - Smooth contact face GN 409.1 Steel Positioning Elements, with Threaded Stem Type: R - Serrated contact face
GN 409.1 Steel Positioning Elements, with Threaded Stem
GN 409.2 Steel Positioning Elements, Tapped Type: B - Smooth contact face GN 409.2 Steel Positioning Elements, Tapped Type: K - Spherical contact face GN 409.2 Steel Positioning Elements, Tapped Type: R - Serrated contact face
GN 409.2 Steel Positioning Elements, Tapped
GN 6220 Steel Standoffs Material: ST - Steel<br />Type: A - Tapped through hole or tapped blind hole GN 6220 Steel Standoffs Material: ST - Steel<br />Type: B - Tapped blind hole and threaded stud
GN 6220 Steel Standoffs
GN 251 Steel Stop Bolts Type: AK - Spherical locating surface, hardened GN 251 Steel Stop Bolts Type: BK - Locating surface with Polyurethane disk
GN 251 Steel Stop Bolts
GN 6220 Stainless Steel Standoffs Material: NI - Stainless steel<br />Type: A - Tapped through hole or tapped blind hole GN 6220 Stainless Steel Standoffs Material: NI - Stainless steel<br />Type: B - Tapped blind hole and threaded stud
GN 6220 Stainless Steel Standoffs
GN 6226 Stainless Steel AISI 316L Spacers in Hygienic Design Type: A1 - Through hole<br />Sealing ring material: H - H-NBR GN 6226 Stainless Steel AISI 316L Spacers in Hygienic Design Type: A1 - Through hole<br />Sealing ring material: E - EPDM GN 6226 Stainless Steel AISI 316L Spacers in Hygienic Design Type: A2 - Through hole with continuous thread<br />Sealing ring material: E - EPDM GN 6226 Stainless Steel AISI 316L Spacers in Hygienic Design Type: A2 - Through hole with continuous thread<br />Sealing ring material: H - H-NBR GN 6226 Stainless Steel AISI 316L Spacers in Hygienic Design Type: A3 - Through hole with thread on both sides<br />Sealing ring material: E - EPDM GN 6226 Stainless Steel AISI 316L Spacers in Hygienic Design Type: A3 - Through hole with thread on both sides<br />Sealing ring material: H - H-NBR
GN 6226 Stainless Steel AISI 316L Spacers in Hygienic Design
DIN 6320 Steel Jig Feet
DIN 6320 Steel Jig Feet
GN 251.2 Steel Stop Bolts, with Limit Switch Type: S - Normally open GN 251.2 Steel Stop Bolts, with Limit Switch Type: O - Normally closed
GN 251.2 Steel Stop Bolts, with Limit Switch
GN 6321.1 Steel Seating Pins
GN 6321.1 Steel Seating Pins
GN 709.1 Steel Clamping Pads, with Threaded Stem Type: R - Serrated contact face GN 709.1 Steel Clamping Pads, with Threaded Stem Type: B - Smooth contact face GN 709.1 Steel Clamping Pads, with Threaded Stem Type: BR - Smooth contact face, with automatic return GN 709.1 Steel Clamping Pads, with Threaded Stem Type: RH - Serrated contact face, with hard metal ball GN 709.1 Steel Clamping Pads, with Threaded Stem Type: RR - Serrated contact face, with automatic return GN 709.1 Steel Clamping Pads, with Threaded Stem Type: RRH - Serrated contact face, with automatic return, with hard metal ball
GN 709.1 Steel Clamping Pads, with Threaded Stem
GN 709.15 Stainless Steel Clamping Pads, with Threaded Stem Type: B - Smooth contact face GN 709.15 Stainless Steel Clamping Pads, with Threaded Stem Type: BR - Smooth contact face, with automatic return GN 709.15 Stainless Steel Clamping Pads, with Threaded Stem Type: RH - Serrated contact face, with hard metal ball GN 709.15 Stainless Steel Clamping Pads, with Threaded Stem Type: RRH - Serrated contact face, with automatic return, with hard metal ball
GN 709.15 Stainless Steel Clamping Pads, with Threaded Stem
GN 709.2 Steel Clamping Pads, Tapped Type: B - Smooth contact face GN 709.2 Steel Clamping Pads, Tapped Type: R - Serrated contact face
GN 709.2 Steel Clamping Pads, Tapped
DIN 6885 Steel Parallel Keys
DIN 6885 Steel Parallel Keys
GN 709.25 Stainless Steel Clamping Pads, Tapped Type: B - Smooth contact face GN 709.25 Stainless Steel Clamping Pads, Tapped Type: BR - Smooth contact face, with automatic return
GN 709.25 Stainless Steel Clamping Pads, Tapped
DIN 6885 Stainless Steel Parallel Keys
DIN 6885 Stainless Steel Parallel Keys
GN 709.3 Steel Clamping Pads, Adjustable Type: B - Smooth contact face GN 709.3 Steel Clamping Pads, Adjustable Type: BR - Smooth contact face, with automatic return GN 709.3 Steel Clamping Pads, Adjustable Type: R - Serrated contact face GN 709.3 Steel Clamping Pads, Adjustable Type: RR - Serrated contact face, with automatic return
GN 709.3 Steel Clamping Pads, Adjustable
GN 709.35 Stainless Steel Clamping Pads, Adjustable Type: B - Smooth contact face GN 709.35 Stainless Steel Clamping Pads, Adjustable Type: BR - Smooth contact face, with automatic return
GN 709.35 Stainless Steel Clamping Pads, Adjustable
GN 709.6 Steel Clamping Pads, Adjustable Type: R - Steel ball, serrated contact face GN 709.6 Steel Clamping Pads, Adjustable Type: B - Steel ball, smooth contact face GN 709.6 Steel Clamping Pads, Adjustable Type: K - Plastic ball, smooth contact face
GN 709.6 Steel Clamping Pads, Adjustable
GN 709.7 Steel Clamping Pads, Tapped Type: B - Steel ball, smooth contact face GN 709.7 Steel Clamping Pads, Tapped Type: K - Plastic ball, smooth contact face GN 709.7 Steel Clamping Pads, Tapped Type: R - Steel ball, serrated contact face
GN 709.7 Steel Clamping Pads, Tapped
GN 709.8 Steel Clamping Pads, Adjustable Type: B - Steel ball, smooth contact face GN 709.8 Steel Clamping Pads, Adjustable Type: K - Plastic ball, smooth contact face GN 709.8 Steel Clamping Pads, Adjustable Type: R - Steel ball, serrated contact face
GN 709.8 Steel Clamping Pads, Adjustable

Quick Release Couplings

GN 1050 Aluminum Quick Release Couplings, with Safety Locking Feature Type: A - WIth threaded stud insert<br />Coding: F - Fixed bearing GN 1050 Aluminum Quick Release Couplings, with Safety Locking Feature Type: A - WIth threaded stud insert<br />Coding: L - Floating bearing GN 1050 Aluminum Quick Release Couplings, with Safety Locking Feature Type: I - With tapped insert<br />Coding: F - Fixed bearing GN 1050 Aluminum Quick Release Couplings, with Safety Locking Feature Type: I - With tapped insert<br />Coding: L - Floating bearing
GN 1050 Aluminum Quick Release Couplings, with Safety Locking Feature
GN 1050.1 Steel Inserts, for Quick Release Couplings GN 1050 and Flanges GN 1050.2 Type: A - WIth threaded stud insert GN 1050.1 Steel Inserts, for Quick Release Couplings GN 1050 and Flanges GN 1050.2 Type: I - With tapped insert
GN 1050.1 Steel Inserts, for Quick Release Couplings GN 1050 and Flanges GN 1050.2
GN 1050.2 Steel Flanges, for Quick Release Couplings GN 1050 and Inserts GN 1050.1 Coding: F - Fixed bearing GN 1050.2 Steel Flanges, for Quick Release Couplings GN 1050 and Inserts GN 1050.1 Coding: L - Floating bearing
GN 1050.2 Steel Flanges, for Quick Release Couplings GN 1050 and Inserts GN 1050.1

Leveling Sets

GN 350 Steel Leveling Sets, Long Model Material: ST - Steel<br />Type: A - Without lock nut GN 350 Steel Leveling Sets, Long Model Material: ST - Steel<br />Type: AK - With lock nut
GN 350 Steel Leveling Sets, Long Model
GN 350 Stainless Steel Leveling Sets, Long Model Material: NI - Stainless steel<br />Type: A - Without lock nut GN 350 Stainless Steel Leveling Sets, Long Model Material: NI - Stainless steel<br />Type: AK - With lock nut
GN 350 Stainless Steel Leveling Sets, Long Model
GN 350.1 Steel Leveling Sets, Short Model Material: ST - Steel<br />Type: A - Without lock nut GN 350.1 Steel Leveling Sets, Short Model Material: ST - Steel<br />Type: AK - With lock nut
GN 350.1 Steel Leveling Sets, Short Model
GN 350.1 Stainless Steel Leveling Sets, Short Model Material: NI - Stainless steel<br />Type: A - Without lock nut GN 350.1 Stainless Steel Leveling Sets, Short Model Material: NI - Stainless steel<br />Type: AK - With lock nut
GN 350.1 Stainless Steel Leveling Sets, Short Model
GN 350.2 Steel Leveling Sets, with Spherical Washer, without Lock Nut Material: ST - Steel
GN 350.2 Steel Leveling Sets, with Spherical Washer, without Lock Nut
GN 350.2 Stainless Steel Leveling Sets, with Spherical Washer, without Lock Nut Material: NI - Stainless steel
GN 350.2 Stainless Steel Leveling Sets, with Spherical Washer, without Lock Nut
GN 350.5 Steel Leveling Sets, with Spherical Washer, with Lock Nut Material: ST - Steel
GN 350.5 Steel Leveling Sets, with Spherical Washer, with Lock Nut
GN 350.5 Stainless Steel Leveling Sets, with Spherical Washer, with Lock Nut Material: NI - Stainless steel
GN 350.5 Stainless Steel Leveling Sets, with Spherical Washer, with Lock Nut
GN 360 Steel Leveling Sets, with Base Material: ST - Steel<br />Type: A - Without lock nut<br />Foot diameter d <sub>1</sub>: 79 GN 360 Steel Leveling Sets, with Base Material: ST - Steel<br />Type: A - Without lock nut<br />Foot diameter d <sub>1</sub>: 40 GN 360 Steel Leveling Sets, with Base Material: ST - Steel<br />Type: B - With lock nut<br />Foot diameter d <sub>1</sub>: 40 GN 360 Steel Leveling Sets, with Base Material: ST - Steel<br />Type: B - With lock nut<br />Foot diameter d <sub>1</sub>: 79
GN 360 Steel Leveling Sets, with Base
GN 360 Stainless Steel Leveling Sets Material: NI - Stainless steel<br />Type: A - Without lock nut<br />Foot diameter d <sub>1</sub>: 79 GN 360 Stainless Steel Leveling Sets Material: NI - Stainless steel<br />Type: A - Without lock nut<br />Foot diameter d <sub>1</sub>: 40 GN 360 Stainless Steel Leveling Sets Material: NI - Stainless steel<br />Type: B - With lock nut<br />Foot diameter d <sub>1</sub>: 40 GN 360 Stainless Steel Leveling Sets Material: NI - Stainless steel<br />Type: B - With lock nut<br />Foot diameter d <sub>1</sub>: 79
GN 360 Stainless Steel Leveling Sets
GN 355 Steel Leveling Elements
GN 355 Steel Leveling Elements
GN 355 Stainless Steel Leveling Elements
GN 355 Stainless Steel Leveling Elements
GN 355.2 Stainless Steel Leveling Elements, with Captive Spherical Washer
GN 355.2 Stainless Steel Leveling Elements, with Captive Spherical Washer
GN 355.1 Steel Assembly Tools, for GN 355 / GN 355.2 Leveling Elements
GN 355.1 Steel Assembly Tools, for GN 355 / GN 355.2 Leveling Elements

Shaft Collars

GN 705 Steel Set Screw Shaft Collars, Blackened Finish Type: A - Slotted set screw with cone point ISO 7434 (DIN 553) GN 705 Steel Set Screw Shaft Collars, Blackened Finish Type: E - Hex socket set screw with cone point DIN 914
GN 705 Steel Set Screw Shaft Collars, Blackened Finish
GN 705 Steel Set Screw Shaft Collars, Zinc Plated
GN 705 Steel Set Screw Shaft Collars, Zinc Plated
GN 705 Stainless Steel Set Screw Shaft Collars
GN 705 Stainless Steel Set Screw Shaft Collars
GN 706.2 Steel / Aluminum Semi-Split Shaft Collars Material: ST - Steel GN 706.2 Steel / Aluminum Semi-Split Shaft Collars Material: AL - Aluminum
GN 706.2 Steel / Aluminum Semi-Split Shaft Collars
GN 706.2 Stainless Steel Semi-Split Shaft Collars
GN 706.2 Stainless Steel Semi-Split Shaft Collars
GN 7062.1 Stainless Steel Semi-Split Shaft Collars, with Tapped Attachment Holes Type: A - Tapped attachment holes, radial GN 7062.1 Stainless Steel Semi-Split Shaft Collars, with Tapped Attachment Holes Type: B - Tapped attachment holes, axial
GN 7062.1 Stainless Steel Semi-Split Shaft Collars, with Tapped Attachment Holes
GN 7062.2 Stainless Steel Semi-Split Shaft Collars, with Mounting Holes Type: A - With two plain holes GN 7062.2 Stainless Steel Semi-Split Shaft Collars, with Mounting Holes Type: B - With two countersunk holes for socket cap screws GN 7062.2 Stainless Steel Semi-Split Shaft Collars, with Mounting Holes Type: C - With two tapped holes
GN 7062.2 Stainless Steel Semi-Split Shaft Collars, with Mounting Holes
GN 7062.3 Stainless Steel Semi-Split Shaft Collars, with Damping Washer
GN 7062.3 Stainless Steel Semi-Split Shaft Collars, with Damping Washer
GN 706.4 Steel / Aluminum Semi-Split Shaft Collars, with Adjustable Lever Material: AL - Aluminum GN 706.4 Steel / Aluminum Semi-Split Shaft Collars, with Adjustable Lever Material: ST - Steel
GN 706.4 Steel / Aluminum Semi-Split Shaft Collars, with Adjustable Lever
GN 706.4 Stainless Steel Semi-Split Shaft Collars, with Adjustable Lever
GN 706.4 Stainless Steel Semi-Split Shaft Collars, with Adjustable Lever
GN 704 Aluminum Quick Release Shaft Collars
GN 704 Aluminum Quick Release Shaft Collars
GN 707.2 Steel / Aluminum Split Shaft Collars Material: ST - Steel GN 707.2 Steel / Aluminum Split Shaft Collars Material: AL - Aluminum
GN 707.2 Steel / Aluminum Split Shaft Collars
GN 707.2 Stainless Steel Split Shaft Collars
GN 707.2 Stainless Steel Split Shaft Collars
GN 7072.1 Stainless Steel Split Shaft Collars, with Tapped Attachment Holes Type: A - Tapped attachment holes, radial GN 7072.1 Stainless Steel Split Shaft Collars, with Tapped Attachment Holes Type: B - Tapped attachment holes, axial
GN 7072.1 Stainless Steel Split Shaft Collars, with Tapped Attachment Holes
GN 7072.2 Stainless Steel Split Shaft Collars, with Mounting Holes Type: A - With two plain holes GN 7072.2 Stainless Steel Split Shaft Collars, with Mounting Holes Type: B - With two countersunk holes for socket cap screws GN 7072.2 Stainless Steel Split Shaft Collars, with Mounting Holes Type: C - With two tapped holes
GN 7072.2 Stainless Steel Split Shaft Collars, with Mounting Holes
GN 7072.3 Stainless Steel Split Shaft Collars, with Damping Washer
GN 7072.3 Stainless Steel Split Shaft Collars, with Damping Washer
EN 707.5 Plastic Split Shaft Collars
EN 707.5 Plastic Split Shaft Collars
GN 311 Zinc Die-Cast Adjustable Levers, Stainless Steel Threaded Stud, for Shaft Collars
GN 311 Zinc Die-Cast Adjustable Levers, Stainless Steel Threaded Stud, for Shaft Collars
GN 7062.10 Stainless Steel Sensor Brackets, for Shaft Collars GN 7062.1 / GN 7072.1
GN 7062.10 Stainless Steel Sensor Brackets, for Shaft Collars GN 7062.1 / GN 7072.1
GN 7062.30 Elastomer Damping Washers, for Semi-Split Shaft Collars
GN 7062.30 Elastomer Damping Washers, for Semi-Split Shaft Collars
GN 7072.30 Elastomer Damping Washers, for Split Shaft Collars
GN 7072.30 Elastomer Damping Washers, for Split Shaft Collars

T-Slot Nuts, T-Slot Bolts

DIN 508 Steel T-Slot Nuts Property class: 10 - Blackened finish DIN 508 Steel T-Slot Nuts Property class: 8 - Plain finish
DIN 508 Steel T-Slot Nuts
DIN 508 Steel T-Slot Nuts, without Thread
DIN 508 Steel T-Slot Nuts, without Thread
DIN 508 Stainless Steel T-Slot Nuts
DIN 508 Stainless Steel T-Slot Nuts
DIN 508 Stainless Steel T-Slot Nuts, without Thread
DIN 508 Stainless Steel T-Slot Nuts, without Thread
STN Inch Size, Steel T-Slot Nuts
STN Inch Size, Steel T-Slot Nuts
NO.508R Steel T-Slot Nuts, without Thread
NO.508R Steel T-Slot Nuts, without Thread
NO.508L Steel Extended T-Slot Nuts
NO.508L Steel Extended T-Slot Nuts
NO.508F Steel T-Slot Nuts, with Spring
NO.508F Steel T-Slot Nuts, with Spring
GN 508.2 Steel T-Slot Nuts, Slip Proof Property class: 10 GN 508.2 Steel T-Slot Nuts, Slip Proof Property class: 8 - Zinc plated, blue passivated finish
GN 508.2 Steel T-Slot Nuts, Slip Proof
GN 508.1 Steel Rhombus T-Slot Nuts
GN 508.1 Steel Rhombus T-Slot Nuts
DIN 6379 Steel Double Ended Threaded Studs, for T-Slot Nuts
DIN 6379 Steel Double Ended Threaded Studs, for T-Slot Nuts
WN 787 Inch Size, Steel T-Slot Bolts
WN 787 Inch Size, Steel T-Slot Bolts
DIN 787 Metric Size, Steel T-Slot Bolts
DIN 787 Metric Size, Steel T-Slot Bolts
NO.797 Steel Rhombus T-Slot Bolts
NO.797 Steel Rhombus T-Slot Bolts

Retaining Cables, Lashing Straps, Carabiners

GN 111 Brass Ball Chains, with 2 Key Rings
GN 111 Brass Ball Chains, with 2 Key Rings
GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Carabiner, with Mounting Tab or Loop Type: L - With carabiner and mounting tab<br />Color: TR - Transparent GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Carabiner, with Mounting Tab or Loop Type: K - With carabiner and loop<br />Color: TR - Transparent
NEW GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Carabiner, with Mounting Tab or Loop
GN 111.5 Stainless Steel Ball Chains, with 2 Key Rings
GN 111.5 Stainless Steel Ball Chains, with 2 Key Rings
GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Carabiner and Key Ring Type: M - With carabiner and key ring<br />Color: TR - Transparent
NEW GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Carabiner and Key Ring
GN 111.8 Stainless Steel AISI 316 Retaining Cables, with 2 Key Rings or 1 Key Ring and 1 Mounting Tab Type: A - With 2 key rings<br />Color: TR - Transparent GN 111.8 Stainless Steel AISI 316 Retaining Cables, with 2 Key Rings or 1 Key Ring and 1 Mounting Tab Type: B - With 1 mounting tab and 1 key ring<br />Color: TR - Transparent
GN 111.8 Stainless Steel AISI 316 Retaining Cables, with 2 Key Rings or 1 Key Ring and 1 Mounting Tab
GN 111.2 Stainless Steel AISI 304 Retaining Cables, with 2 Key Rings or with 1 Key Ring and 1 Mounting Tab Type: A - With 2 key rings<br />Color: BL - Plain finish GN 111.2 Stainless Steel AISI 304 Retaining Cables, with 2 Key Rings or with 1 Key Ring and 1 Mounting Tab Type: A - With 2 key rings<br />Color: SW - Black GN 111.2 Stainless Steel AISI 304 Retaining Cables, with 2 Key Rings or with 1 Key Ring and 1 Mounting Tab Type: A - With 2 key rings<br />Color: TR - Transparent GN 111.2 Stainless Steel AISI 304 Retaining Cables, with 2 Key Rings or with 1 Key Ring and 1 Mounting Tab Type: B - With 1 mounting tab and 1 key ring<br />Color: BL - Plain finish GN 111.2 Stainless Steel AISI 304 Retaining Cables, with 2 Key Rings or with 1 Key Ring and 1 Mounting Tab Type: B - With 1 mounting tab and 1 key ring<br />Color: SW - Black GN 111.2 Stainless Steel AISI 304 Retaining Cables, with 2 Key Rings or with 1 Key Ring and 1 Mounting Tab Type: B - With 1 mounting tab and 1 key ring<br />Color: TR - Transparent
GN 111.2 Stainless Steel AISI 304 Retaining Cables, with 2 Key Rings or with 1 Key Ring and 1 Mounting Tab
GN 111.8 Stainless Steel AISI 316 Retaining Cables, with Mounting Tabs Type: C - With 2 mounting tabs<br />Color: TR - Transparent
GN 111.8 Stainless Steel AISI 316 Retaining Cables, with Mounting Tabs
GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Mounting Tabs or Loops Type: C - With 2 mounting tabs<br />Color: BL - Plain finish GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Mounting Tabs or Loops Type: C - With 2 mounting tabs<br />Color: SW - Black GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Mounting Tabs or Loops Type: C - With 2 mounting tabs<br />Color: TR - Transparent GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Mounting Tabs or Loops Type: D - With 2 loops<br />Color: BL - Plain finish GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Mounting Tabs or Loops Type: D - With 2 loops<br />Color: SW - Black GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Mounting Tabs or Loops Type: D - With 2 loops<br />Color: TR - Transparent GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Mounting Tabs or Loops Type: E - With 1 mounting tab and 1 loop<br />Color: BL - Plain finish GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Mounting Tabs or Loops Type: E - With 1 mounting tab and 1 loop<br />Color: SW - Black GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Mounting Tabs or Loops Type: E - With 1 mounting tab and 1 loop<br />Color: TR - Transparent
GN 111.2 Stainless Steel AISI 304 Retaining Cables, with Mounting Tabs or Loops
GN 111.4 Plastic Spiral Retaining Cables, with 2 Key Rings
GN 111.4 Plastic Spiral Retaining Cables, with 2 Key Rings
GN 111.6 Stainless Steel Lanyard Rings
GN 111.6 Stainless Steel Lanyard Rings
GN 111.3 Stainless Steel Key Rings Finish: SW - Black passivated finish GN 111.3 Stainless Steel Key Rings Finish: BL - Plain finish
GN 111.3 Stainless Steel Key Rings
GN 1110 Plastic Lashing Straps, Buckle Steel / Stainless Steel Material: NI - Stainless steel GN 1110 Plastic Lashing Straps, Buckle Steel / Stainless Steel Material: ST - Steel
GN 1110 Plastic Lashing Straps, Buckle Steel / Stainless Steel
GN 1024 Steel Spring Cotter Pins Type: E - With single loop GN 1024 Steel Spring Cotter Pins Type: D - With double loop
GN 1024 Steel Spring Cotter Pins
GN 1024 Stainless Steel Spring Cotter Pins Type: E - With single loop GN 1024 Stainless Steel Spring Cotter Pins Type: D - With double loop
GN 1024 Stainless Steel Spring Cotter Pins
GN 5299 Steel / Stainless Steel Carabiners Type: C - Open eye<br />Material: A4 - Stainless steel GN 5299 Steel / Stainless Steel Carabiners Type: C - Open eye<br />Material: ST - Steel GN 5299 Steel / Stainless Steel Carabiners Type: E - Closed eye<br />Material: A4 - Stainless steel
GN 5299 Steel / Stainless Steel Carabiners
Click below for Custom Solutions. Special requests
Your Contact

You are looking for a Winco partner near you? Please select the country.

JW Winco Services

Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time

+52(81)2721-4021 ventas@jwwinco.mx
Request Callback
 
Our customers in the US are served by our local branch office.
 
J.W. Winco, Inc.
J.W. Winco, Inc.
Go to
www.jwwinco.com
An error has occurred!
We have received your callback request and will contact you soon.